r/pools • u/Ancient_Pop1712 • 22h ago
Water Chemistry Did I read the results correctly?
I'm almost positive that the water is clean enough for swimming in. Am I right?
r/pools • u/Ancient_Pop1712 • 22h ago
I'm almost positive that the water is clean enough for swimming in. Am I right?
r/pools • u/Dawnsicle • 1h ago
Hi Reddit !
I’m a pool care newbie and struggling to understand how to turn off my solar heating. I’ve had two leaks in the system already this year already and discovered that I have another pipe that developed pinhole leaks now too!
I’m trying to cut off all water routing to the roof to stop the water from leaking as it’s also causing a roof leak. I remember this being tricky last time but now I can’t figure out how to get it to stop flowing up through those pipes.
Pentair solartouch
- all temp ranges set low
- heating and cooling disabled
- panel itself disabled
The autovalve turns when I toggle between on 1 and on 2 (moved to off to hold the position) but regardless of where it is, water still goes up to the roof if the pool pump is on.
Help! What am I missing ?
Hi everyone,
I’m looking for some practical advice on keeping my pool pipes and filter from freezing during winter in Belgium, where nighttime temperatures regularly drop below 0°C (32°F).
I’m not lowering the water level below the skimmer, so I want to rely on water circulation to prevent freezing. My pool technician suggested running the filter system for 1 hour four times a day (around 6:00 AM, noon, 6:00 PM, and midnight). However, I’m worried that long stretches without water flow overnight could allow water in the pipes or filter to freeze.
Would running the system for 30 minutes every 2–3 hours at night be better, or should I run it continuously all night when temperatures drop below freezing?
What is the safest and most reliable approach in this kind of climate? Any advice or experience from colder/damp winters like Belgium’s would be much appreciated. Thanks in advance!
r/pools • u/WickedPulling • 40m ago
What brand hose doesn’t kink and is your favorite. I’m willing to spend money on this. Drop links if you can.
r/pools • u/TechnologyAbject2931 • 8h ago
Building a pool in Belize and ran into a major workmanship issue.
The contractor appears to have bonded all of the return jets and light niches directly into the Diamond Brite finish. Several jets are effectively cemented in place, and 5 of the returns are not functioning. The lights work, but I will likely have a tough time replacing if one ever fails. My suspicion is that Diamond Brite, plaster material, or construction debris entered the lines during finishing.
Looking for advice from experienced pool builders and service technicians:
At this point, it feels like every contractor over-promises, under-delivers, and leaves behind expensive mistakes for someone else to fix. I'm trying to determine the proper repair approach before making the situation worse.
r/pools • u/wobuzhudao • 23h ago
How many times have you accidentally fallen into your pool doing regular maintenance.... with your phone in your pocket... before you've decided to leave the phone inside?
Please tell me it's more than two...
r/pools • u/gettapeppasowse • 7h ago
So this has been getting progressively worse and accelerating in the last few weeks my pool is about 30 years old and is marbelite?...if i remember correctly...any help would be appreciated this looks very expensive....based in South Africa
r/pools • u/Status-Fig8005 • 9h ago
Not too sure how it cracked
I live in the SoCal region so warm summers, cool winters.
Two years ago we moved into a house with an in ground pool but it is unheated. We keep a cover on it basically year round, partially to keep it warm but also to keep debris out.
First year I bought a Sun2Solar 1200. After the one season it disintegrated. Even trying to throw it away i got covered in small shards of plastic just handling it. So this past year I bought a Sun2Solar 1600 thinking the investment of a thicker millimeter cover would get it to last longer. But to my surprise this one lasted even less time and is actually developing pretty big holes. The last one just had the bubbles falling apart but thus one is literally tearing and making holes that I can not even patch.
So to this community, does anyone ever actually get these things to last more than a couple of years? Especially if it is not being put away part of the year since it is used year round? If so, what are you doing to get it to survive?
r/pools • u/Myburneraccount2023 • 16h ago
Moved into a new house. My T3000 Dolphin keeps getting stuck. Is there an easy way to fix? Thanks!
r/pools • u/wadester007 • 18h ago
That top part is new we have to replace it but it's not fitting correctly as you can see in the video how should I go about making it fit or is the part bad or do I need to send a little bit on one side?
I have a Pentair 400 gas water heater. We're moving but need to install a pressure relief valve to resolve an old permit. I resolved to pay $400 to get the relief valve installed but he couldn't get the bolt out without fear of breaking the housing. He offered to replace the housing and the valve for 1100. I'd love to save 700 if I can get the bolt out somehow 🤔 The housing is plastic so adding heat isn't an option. The bolt has a square head and it's getting stripped with additional attempts. I am worried even if I got a handle on it, the torque needed would displace the whole heater! I haven't yet tried a solvent.
r/pools • u/allie_asks_a_latte • 21h ago
Looking for photos of finished pools with PMM brand’s Pewter! Any help is greatly appreciated!
I started using poolownertalk water testing tool and i love it. Nice features. Would like to compare it to other tools, web based only, dont want an APP. Any tool to try to compare it to. I just want to make sure the results are accurate.
r/pools • u/eCamp_78 • 1d ago
One week old French blue river rock plaster.
Before they acid washed it was all uniformly dark grey, after acid wash while filling it started getting that white haze everywhere, you can even see footprints which coincide with video footage of them walking and hosing it down.
Pool was full that same evening and I’ve been brushing it a few times a day ever since. Followed SGM’s startup procedure to the tee and it’s documented. Contractor is trying to blame me, when it was clearly there from before the pool was even finished.
I’m stuck having to deal with this and I don’t know what to do. I did a pvc spot check with some acid and it removed the white film in that spot, but I don’t know if it just removed it or etched the cement and I don’t want to make matters worse. Still needs to cure.
Any recommendations?
r/pools • u/BerryTypical6526 • 1d ago
Hosting two properties in central Florida, both with pools. Airbnb has been sending more pool safety communications than usual this summer. Emails about safety equipment, links to partner programs, general messaging about barriers
I can't tell from the messaging what's required to keep listings active vs what's a recommendation I could technically ignore. Those are very different budget line items for two properties
r/pools • u/Bald_Pilot • 1d ago
Been trying to get this pool clean. Added flocculant to try and get sediment to clump and make cleaning a bit easier. It made this layer gunk/slime on top of the pool. Do any of you have a more efficient suggestion of cleaning this, as I feel like my pool net just breaks it all up again, making the point of the flocculant null and void.
r/pools • u/gatornoles • 22h ago
We recently had our pool closed for the winter. I had requested that the tech do it on a certain day when I would be available to watch what he does, but he ended up coming on a day when we are out of town as it "fit his schedule better". Does this look adequate for closing? I was a little surprised by how much water is still left in the pool. I assume he blew out the lines and then put this little thing that looks like a plug into the skimmer drain. Is there anything specific I should reach out and ask about? Thanks! We are in central Virginia for reference.
I have a Jandy Pro Series TruClear Salt System Control Panel. It's running 100% chlorine. How do I lower it? I have watched several videos and nothing works. Any help would be much appreciated.
Edit: Had to put in service mode to change it.
r/pools • u/ConsciousCraft6996 • 1d ago
I had a pool leak and called a local company to find the leak. While they were locating the leak they removed the jet covers and it's looks like they removed some of the plaster like an inch away from the jet cover. They said this is because the plaster was on the jet cover but to me it seems too far away. Also after making the repair to the leak they used a pressure washer with algaecide and after they left i noticed about 40 of these lines that look like marks left from the pressure washer. They are not indents but when I asked them they blamed whoever plastered the pool years ago, saying they didn't seal it properly. So they would not do anything to fix either. Does anyone know if they are correct about neither of these being their fault
r/pools • u/hoatigon • 1d ago
New pool owner here
Thank you for all answer in advance!
Has anyone closed pool in Las Vegas NV during winter?
r/pools • u/ToeyGowd • 1d ago
We had a smaller saltwater pool put in this spring so it’ll be our first “winter” with it. We don’t have a pool heater but I’m looking to keep it warmer for as long as possible so that the kids can continue to use it.
Any recommendations on heating options? I initially was looking at solar blankets but stumbled across a few posts recommending solar run rings as well. Trying not to break the bank so nothing too too fancy.