r/Pottery • • Mar 27 '26

Question! Ceramic artists: stereotypes and prejudices?

8 Upvotes

Hello everyone!
On Monday (March 30), we’ll be welcoming ceramic artist Lea as a guest on “Work hard – play hard”, a series on Twitch. Hosted by ARD, the biggest German Public Media Broadcaster. It won’t be a traditional interview. Lea will be testing various simulation games designed to "replicate" her craft (i.e. Sims4 & Master of Pottery).

Our goal is to find out how realistic these games actually are and what everyday life in her profession really looks like. To help break down prejudices, viewers can unlock so-called “prejudice questions”. And now it’s your turn:

What preconceptions about the profession of ceramic artist have you come across? What are the weirdest/stupidest/funniest "frequently asked questions" you had to answer? And: What topics related to the job need to be discussed urgently? 

We’d love to include your questions in the show. Thank you!

P.S. Thanks to the mods for allowing us to post here.


r/Pottery • • Dec 04 '25

Kiln Stuff PSA for the holiday season: DON’T buy someone a kiln

1.1k Upvotes

With Christmas approaching the “I want to surprise my [wife/boyfriend/mother/cat/DoorDash driver] with a kiln, what should I get them?” threads are beginning to show up daily.

Do not buy this person a kiln.

Even if they’ve told you they’d like a kiln someday. Even if they’re frustrated with having to take their work somewhere to be fired.

The only circumstance in which a kiln is an acceptable gift is if this person has told you “I want a kiln for Christmas, and here’s the specific model I want.” Period.

A kiln is not like a new TV. Kilns need specific electrical and ventilation requirements that your house/garage/shed/whatever almost certainly does not have. The electrical work needs to be done by a professional, and it needs to be done right- many kilns use heavier gauge wiring and bigger circuit breakers than you typically encounter in a residential setting, and using undersized wire can start a fire. In some cases, especially older houses, the home’s entire electrical service will need to be upgraded. In a best case scenario you’re probably looking at around $1000 in additional expense before you can even turn the kiln on. Worst case you could incur costs approaching $10,000.

Kilns come in all shapes and sizes with different capabilities, and what works for one potter may not work for another. Also, many used kilns you find for sale online aren’t capable of being used for ceramics at all.

Surprising someone with a kiln is like surprising someone with a horse. Without being prepared to take it in the prospect is a burden, not a gift.

If you really, REALLY want to buy someone a kiln for Christmas, have this conversation: “I want to buy you a kiln. Let’s pick one out together.”

Happy holidays!


r/Pottery • • 1h ago

Other Types I paint traditional tattoos on my pots. Here are some of the things I have made recently!

Thumbnail
gallery
599 Upvotes

r/Pottery • • 16h ago

Question! Ceramic buttons

Thumbnail
gallery
1.2k Upvotes

Hiii❤️ can someone help me on how to make this type of buttons? im new to pottery and i would really love to add this kind of buttons to my knitted cardigan. i love the tecnique they used to create the beautiful color of the buttons i need to know how!!! tysm in advance


r/Pottery • • 5h ago

Question! Etsy’s AI disappointment: where now?

63 Upvotes

Wondering where the community is looking to sell online following Etsy’s recent announcement that sellers’ work will be used to train AI models. I’m not producing quite enough work yet to support an independent storefront, and I was getting most sales through Etsy’s search algorithm. Are there any companies out there that aren’t harvesting artist’s creativity to feed the Borg?


r/Pottery • • 3h ago

Help! Chipping after glaze fire

Thumbnail
gallery
18 Upvotes

So I’ve been going to a community studio, I make my things at home and fire at the studio and recently (past couple months which is the entire time I’ve been at this studio) my pots have come out with chips taken out of the foots despite having no glaze drips or anything of the sort.

Does anyone know why this is happening? It doesn’t happen to all of my pots but it happens to most ( no pattern in what chips and what doesn’t) but I’d love to know if I can do anything to prevent this because it’s really upsetting.


r/Pottery • • 7h ago

Silliness / Memes What unhinged “tools” have you used for making pottery? (Bonus if they’re funny)

26 Upvotes

I’ve used a foot scraper (bought new for clay lol) and my kids pumpkin carving knife.


r/Pottery • • 49m ago

Mugs & Cups Cocktail glasses

Thumbnail
gallery
6 Upvotes

I figured out my 4 sided mugs have a pretty nice hand feel without the handles and are just the right size for cocktails. Added some lines for texture and the glazing came out quite nice.


r/Pottery • • 13m ago

Bowls bowls with handles

Thumbnail
gallery
5 Upvotes

r/Pottery • • 1d ago

Question! Some of my recent pieces ❤️

Thumbnail
gallery
674 Upvotes

First time posting some of my work as I had a friend take some beautiful legit pictures… trying to decide if I like the outdoor look more than inside— I think I do. I am still working on my online presence and want a cohesive look. Anyway- love this community and love being able to play with clay and share the love with others ❤️❤️


r/Pottery • • 2h ago

Glazing Techniques First batch glazed and ready

Thumbnail
gallery
5 Upvotes

All the things I made, glazed and ready for

final firing.


r/Pottery • • 1d ago

DinnerWare Stacking plates à la hamburger

Post image
818 Upvotes

r/Pottery • • 20h ago

Mugs & Cups Attempt 2 at the cat!!

Post image
126 Upvotes

I really appreciate the kind critique and feedback I got from this sub the other day! It’s still far from perfect but I’m hopeful it looks a little bit more like my loyal customers deceased cat! My first real commission and it was a doozy! I hadn’t anticipated how difficult multi colored short fur could be to paint.


r/Pottery • • 7h ago

Glazing Techniques Amaco Kiln Ice works at cone 10! 😱😍

Thumbnail
gallery
11 Upvotes

Officially cone 5/6 glazes but my studio only fires to cone 10 so I said fuck it and tried it and it came out STUNNING!! This is a double poured dummy thick layer of kiln ice snow drift over straw velvet underglaze and light green (🫣) underglaze!


r/Pottery • • 21h ago

Help! My dirty little secret

109 Upvotes

I’ve been potting for about 14 years. People like my work, and I’ve sold quite a few pieces over the years. I feel good about my designs and my glazing. But I have a dirty little secret: I’m a lousy potter! Specifically, after all these years I’m still struggling mightily with centering. I try hard to have well-wedged balls of clay and put them down right in the center of the wheel—but it’s never perfect. When I cone up and down, it’s always irregular at the bottom. When I open, there’s always one side that’s thicker than the other. Every potter knows how that results in a cascade of problems. I spend a lot of time and energy correcting the mistakes, shaving off one side, etc., and I do a whole lot of trimming afterwards, hopefully ending up with something that looks okay (but is far from perfect). I took lots of beginner classes when I started out, and a few refreshers since then, but the teachers don’t have all that much to say about my problem, they are more interested in different subjects. I think I’m aware of much of the usual advice: brace my arm on the tray, cut away excess at the bottom, use two metal ribs, etc. But then I watch the pros on videos, and their initial centering and opening is always perfect and takes only a moment. I can’t claim I haven’t had enough practice—I’ve made thousands of pots. Do I just lack the talent? Any advice?


r/Pottery • • 23h ago

Question! When using underglaze, do I need to clear coat it or is it ok as is?

Thumbnail
gallery
124 Upvotes

r/Pottery • • 17h ago

Glazing Techniques coyote forest satin glaze

Thumbnail
gallery
36 Upvotes

honestly only sharing this because it’s hard to find pics of this glaze! fired to cone 6 on my studios reclaim :)


r/Pottery • • 2h ago

Question! What kind of table do you use in your home studio?

2 Upvotes

Currently using an old ikea dining table, but it’s flimsy and moves around a ton when I’m wedging. I lay Hardi Board on top of it to work on and that also shifts a ton while I’m wedging/working. I’d like something more stable and also height adjustable. Figured I’d look now to see if there are any Black Friday deals.


r/Pottery • • 4h ago

Question! Basic home setup for handbuilding

3 Upvotes

I am a newbie and am taking classes at a studio.

I’m hoping to practice handbuilding at home (and focusing on throwing, trimming and glazing at the studio).

I looked up the FAQs here for home setup, but in addition to what I learned there I am curious if people have further tips.

Here’s my checklist of what to get:

- Floor protection cover for my hardwood floor (any suggestions?)
- A table to work on (thinking of a cheap plastic one?)
- 3 Buckets for washing and decanting (including washing my hands)
- Ruler, wooden sticks, roller
- plastic to cover pieces (or is a plastic box better?)
- spritz bottle
- basic pottery tool kit
- sponges
- moulds
- and I will use my studio’s clay so I can fire there

Am I forgetting anything? Will this be OK in terms of dust and silica particles in the air?


r/Pottery • • 17h ago

Accessible Pottery Snail pot

Thumbnail
gallery
26 Upvotes

First time I tried hand painting with underglaze. I'm super happy with how it turned out. I was blessed by the fickle glaze goddess


r/Pottery • • 9m ago

Clay New controller for my kiln

Post image
1 Upvotes

I'm trying put my new controller for the kiln today, I've been supervising the first fire woth it flr a few hours now 😂 my old one completely died and my dad built me a new one out of old stuff we had at home.

I recommend getting av engineer in the house or as a friend they are very good to have close on hand 😅❤️


r/Pottery • • 14h ago

Question! Thoughts on people asking to buy imperfect work for cheaper?

12 Upvotes

I have had several people ask to buy mugs I've made that have flaws like a chipped foot or a shallow crack where the handle connects. They function fine (like I'd use them myself with no worries) but I was not intending to sell anything that didn't turn out perfect. However these people have been clear that they can't afford full price.

I've been offered half price and a trade so far which I accepted because they really wanted to support me, but I honestly don't even like selling messed up stuff. I was super clear about it not being my best but they seemed happy. I don't know how to feel about it because I'd rather present my best work only but then I wouldn't be willing to compromise on price so much.

Has anyone else had this issue? Am I overthinking? I would just give them away honestly but they seemed so excited to give me something for it. Plus they've started to spread the word to other people we know that I'll sell them at a discount :/


r/Pottery • • 2h ago

Help! Subscription recs?

0 Upvotes

I've been member of ceramics arts network in the past and now there are so many memberships out there. I'm currently looking between ceramics arts network again, matherhouse and ceramics materials workshop memberships. Anyone have any they love, hate, etc? I have been in the intermediate level for decades. I'm an art teacher and clay is my medium and looking for taking the next leap to professional now that I'm in my last decade of teaching and my kids are older and I have time to dedicate to do this. My goal is to produce fine art ceramics and transition to exhibitions/galleries/fine art fairs.


r/Pottery • • 19h ago

Wheel throwing Related Finally throwing okay enough to make mugs with dimpled holds.

Post image
22 Upvotes

Finally throwing decently enough to nake these! I made them so bulky before that I had to trim then a lot everytime, all over.

Feels like a small achievement :D