r/printmaking • • 17h ago

relief/woodcut/lino I can’t be the only one…

Post image
63 Upvotes

I got to see Knocked Loose a few weeks ago in Worcester and it will go down as one of the greatest nights of my life. I present the linocut print I created in honor of that show


r/printmaking • • 2h ago

relief/woodcut/lino A block printed ornament

Thumbnail
gallery
61 Upvotes

Finished my finicky little ornament stamp! First time using a dremel to do tiny circles and it was soooo nice. Everything else done with regular carving tools, mostly the knife. Really pleased with how it came out! I did the design myself from scratchin Illustrator, printed it and transferred it to the block since it's such a precise design, didn't want to trust hand-drawing.


r/printmaking • • 2h ago

relief/woodcut/lino Flamberge

Post image
10 Upvotes

Second post, thank you for the support and really kind words last time. That was my first time sharing my work with a wider public so I was taken aback and overwhelmed. 💙


r/printmaking • • 2h ago

question Requesting advice on reducing eye strain while doing fine details + equipment advice

1 Upvotes

I do a lot of fine details and small grids and patterns and stuff in my work .

I am worried that I am over straining my eyes a bit trying to see all this small detail.

Has anyone had success using the those big square lenses that old people use to read newspapers? They look useful but I'm not sure if they would distort things or not.

I'm also curious if anyone has any advice on lamps?

The normal desk lamp I use is on its way out , and I've seen studio lamps for sale a Jackson art (a lot of them say daylight lighting ) and I'm wondering if they're worth getting or if they're nothing special.

Any other general advice would also be appreciated.

(Outside of 'get your eyes tested' , which I don't think is the issue given eyestrain only really comes up when I'm working at the scale of millimetres( though I could be wrong ofc))


r/printmaking • • 5h ago

intaglio/engraving/etching Souls

Post image
14 Upvotes

r/printmaking • • 7h ago

relief/woodcut/lino Offcuts

Thumbnail
gallery
77 Upvotes

As I mostly post elaborate, multicolour reduction linos, thought it would be interesting to show these quick ten minute explorations I do on small offcut pieces. I tend to usually have 3-5 of these on my desk, just to quickly carve something if I'm overasaturated with my main block. I'd either print them at the end of a bigger piece run, with whatever ink is left on the slab or mix up some black and print a bunch of them.


r/printmaking • • 7h ago

cyanotype/photographic printmaking Polycrylic transfer

2 Upvotes

Hello everyone! Newbie here.i want to start transferring images onto wood using minwax polycrylic. If im correct.i need to laser print on the shiny side of sticker paper. My question is will staples do it? I only have an inkjet printer. And how do I get them home without smudging? Lol


r/printmaking • • 10h ago

risograph Continuing my duotone fruit tree series

Post image
126 Upvotes

I’ve wanted to do a print with these colors — bright olive green and scarlet — for a very long time. Thanks to the toyon and the winter holiday season for a good excuse to illustrate this!


r/printmaking • • 12h ago

question ¿Puedo hacer stickers en vinil?

1 Upvotes

Hace poco un amigo me ayudó a hacer unos stickers en papel vinil con serigrafía, y, quería saber si era posible hacer lo mismo con tinta offset pero con linóleo


r/printmaking • • 13h ago

gelli plates Trees with Eyes

Post image
7 Upvotes

r/printmaking • • 14h ago

relief/woodcut/lino Some work of mine

Post image
28 Upvotes

It’s a day of productivity


r/printmaking • • 14h ago

question What the hell is going on with my brayer?!

5 Upvotes

I've tried cleaning it, not cleaning it, going insane etc. ​​​


r/printmaking • • 14h ago

relief/woodcut/lino Called a redo on Argent - looking at v1 and v2

Thumbnail
gallery
86 Upvotes

I carved Argent v1 yesterday and I was really dissatisfied - not because of the carve, but because of the original 5-6 year old drawing. I hadn’t liked it then either, but I couldn’t figure out what was wrong.

With fresh eyes half a decade later, I saw that the head on v1, along with the paws, were all bigger in proportion compared to Kibs’s design. They didn’t look like part of a set. So, today I pulled up the original procreate file (because my iPad is going on 8 years old and I’m shooting for 10), fucked about with it, and landed somewhere I’m much, much happier with.

Anyway now I feel like they match and I can put this duo on the wall! Will I feel like making versions of the two OTHER cats we got in the intervening years? That remains to be seen. But still, I feel like I sort of leveled up. Go me!

And of course IRL Argent for cat tax. She loves to roll around like this in the bathtub.


r/printmaking • • 16h ago

fabric I can not get a good print on shirts…

Post image
15 Upvotes

This is my third shirt I have tried printing on today, none of them are printing consistently throughout block… I know I’m for sure putting enough ink on my print, and I’m sitting on the block to make sure it transfers properly, what am I doing wrong???


r/printmaking • • 17h ago

relief/woodcut/lino Astronaut

Thumbnail
gallery
5 Upvotes

r/printmaking • • 18h ago

relief/woodcut/lino Little eraser print for the edge of my paper

Post image
39 Upvotes

A tiny fairy living in the knot of an old, mushroom covered tree gets an equally tiny visitor. Is it the best thing I’ve ever made? No. Is it the cutest? Yup.


r/printmaking • • 19h ago

critique request Fabric Printing Progress

Thumbnail
gallery
85 Upvotes

Want to say thank you to whoever recommended misting fabric with water first, and applying multiple thin layers of ink! These prints aren’t perfect, but they’re a lot better than previous attempts. If anyone can identify any issues here, I’d appreciate whatever feedback or advice you have. TIA!


r/printmaking • • 20h ago

question Homemade registration jig

6 Upvotes

I know you can buy mass-produced registration jigs, but I'm also pretty sure they can be homemade. So, I was wondering if any of you that have would mind sharing pics and descriptions, including materials, methods of use (brayer or press use, etc). Thanks!


r/printmaking • • 22h ago

wip Tripple Goddess test print

Post image
51 Upvotes

A few tweaks to make but for my first print postpartum I'm pretty happy so far! I'm thinking a nice plumy purple or red for the final print.


r/printmaking • • 22h ago

question Looking for a small white tea towel to print onto

1 Upvotes

I have a linocut design that I want to print onto tea towels for Christmas presents for my family. Looking for some I can order online (preferably not amazon) that are a good material for printing. Any help is appreciated!


r/printmaking • • 22h ago

relief/woodcut/lino Fly Agaric mushroom print 🍄

Thumbnail
gallery
4 Upvotes

r/printmaking • • 23h ago

question Color layout, template making question

Post image
4 Upvotes

Good day, I'm wanting to work on a wood block print 2-3 color. I had the initial plan to do I've got a photo, I'd converted it to a BW SVG and changed the saturations and levels to make it somewhat blocked. I started maching up the colors to try to see an end product before I get too deep and am not liking the results. What are people doing if wanting to use a reference photo and simplify. Ref: this is the old home road, snowy road. ( Not adding original as it could easily be identified)