r/radeon • • 5h ago

Discussion RIP my 9070XT

Post image
215 Upvotes

On the evening of the 18th, while I was using it, the screen started going black, three times, to be precise. On the morning of the 19th, there were no issues; I used the PC for a few hours and didn't turn it on again until the following morning. By the 20th, the graphics card stopped outputting a video signal. Even when using the processor's integrated graphics, the dedicated card wasn't detected by Device Manager or the Adrenalin software. I tried removing it from the PCIe slot and reseating it, but that didn't help; changing the power cables didn't work either. I even took it to a computer repair shop to see if they could figure out what was wrong, but they couldn't find anything either. I’ve already opened a warranty claim, but I’m furious, not just because it’s broken, but because I have no idea why. There’s no visible external damage or signs of burning. I really hope they can replace it, because I have no idea where I’d get the money to buy another one.


r/radeon • • 51m ago

First time going "red"

Post image
18 Upvotes

My first Radeon graphics card after 25 years with the "green" team. Can't wait to see how it performs in-game.

I’m also taking the opportunity to upgrade my power supply to accommodate the beast.

Any tips on how to get it running optimally?


r/radeon • • 7h ago

How is the 26.11.2 driver performing ?

Post image
61 Upvotes

r/radeon • • 6h ago

This beauty 😍

38 Upvotes

r/radeon • • 1h ago

Discussion RX 9070XT died on me

6 Upvotes

Couple days ago I was on my pc when my screen went grey all of a sudden and wouldn’t respond to anything. So I just decided to turn the pc off and wait a bit before turning it back on. When I went to turn it back on it got stuck on the white VGA debug light on my monitor and wouldn’t go past it. Eventually I decided to take out the GPU and put it back in but it still got stuck in the white light. If I take out and try to turn on my lc using integrated graphics, it boots up and is able to post properly with no problems. At a loss of what to do now since I think all issues point to my gpu being the problem. For some other details psu is the Corsair RM750e, RYZEN 7 9800X30 cpu, and the ASUS TUF GAMING B650E-E motherboard.

Edit: My specific gpu is the ASRock Radeon RX 9070 XT Challenger


r/radeon • • 20m ago

Qualcuno ha il mio stesso problema?

3 Upvotes

Come sempre Adrenaline ogni tanto deve fare brutti scherzi, qualcuno ha questo problema o sa come risolvere? Registro lo schermo e quando vado a rivedere la registrazione Adrenaline si chiude. Lo fa sempre, consigli?


r/radeon • • 2h ago

Tech Support 9060xt, 9070gre, or 9070 with a 5600?

4 Upvotes

Which would be the best to get right bow (in the uk) to get with a 5600? Im playing on a 1440p monitor at the moment, but might upgrade to a 3440x1440 monitor later. Will be playing games from RDR2, 007 to hades 2, planet zoo to horizon forbidden west, god of war, and then cinema4d, after effects


r/radeon • • 18h ago

Joining the crew soon

Post image
70 Upvotes

r/radeon • • 1h ago

Aggressif FAN | GIGABYTE Control Center automatically overrides AMD Adrenalin Default fan settings – Radeon RX 9070 XT

2 Upvotes

I have a GIGABYTE Radeon RX 9070 XT Gaming OC 16GB with GCC 26.10.21.01 and GBT_VGA 26.11.12.01.

I discovered a strange issue with GIGABYTE Control Center (GCC) and AMD Adrenalin.

Here's the exact sequence:

  1. AMD Adrenalin is set to Default, with automatic Radeon graphics card fan management.
  2. I open GIGABYTE Control Center and simply switch from the motherboard view to the Radeon graphics card Fan Control page.
  3. Without changing anything or clicking Apply, AMD Adrenalin automatically switches from Default to Custom.
  4. The Custom profile activates a very aggressive fan curve that I NEVER configured myself, reaching 100% fan speed around 70°C.
  5. While playing Warzone, I've recorded Radeon graphics card fan speeds up to 4,359 RPM, making my PC extremely loud.

I've reproduced this behavior multiple times. Switching AMD Adrenalin back to Default restores the automatic settings, but simply opening the Radeon graphics card page in GCC triggers Custom again.

Has anyone experienced this? Why does GCC automatically override AMD Adrenalin's Default fan settings?

What did you do to fix it? Did you uninstall GBT_VGA, disable GCC, or find another solution that preserves RGB lighting and motherboard fan control?

I'd really appreciate hearing what worked for you!


r/radeon • • 3h ago

Recommended PSU

2 Upvotes

After seeing posts about bad PSUs and the damage they can cause, I want to replace mine. I currently have a UNYKAch Atilius 2.0 750W (bulk).

My PC: GIGABYTE RX 9070 XT, Ryzen 7 9700X (8-core), 32 GB DDR5. Case: Lian Li Vector V100R.

Which ATX PSU would be a good, safe fit for this build?


r/radeon • • 10h ago

Sapphire NITRO+ RX 9070 XT not detected on MSI PRO B850-P WIFI, but works perfectly in another PC. Tried almost everything.

7 Upvotes

Hi everyone,

I'm having a really frustrating issue with my brand-new Sapphire NITRO+ RX 9070 XT. The GPU works perfectly fine in my older PC, but my newer PC doesn't detect it at all.

I've spent hours troubleshooting and I'm running out of ideas. I'm hoping someone here has experienced something similar.

My current PC (GPU not working)

  • GPU: Sapphire NITRO+ Radeon RX 9070 XT
  • Motherboard: MSI PRO B850-P WIFI (MS-7E56)
  • CPU: AMD Ryzen 7 7800X3D
  • RAM: ADATA XPG Lancer Blade DDR5 32GB 6000MHz CL30
  • PSU: MSI MPG A850G PCIE5 850W
  • BIOS: E7E56AMSI.2A93 (September 3, 2026)

My previous RX 6750 XT works normally in this exact system.

Older PC (RX 9070 XT works)

  • GPU: Sapphire NITRO+ RX 9070 XT
  • Motherboard: ASUS TUF GAMING B550-PLUS
  • CPU: AMD Ryzen 5 5600X
  • RAM: DDR4
  • PSU: SilentiumPC Supremo FM2 Gold 750W

The RX 9070 XT works in this older PC, including its RGB lighting.

The problem

When I install the RX 9070 XT in my MSI B850 system:

  • The PC powers on normally.
  • The GPU appears completely inactive.
  • No RGB lighting on the GPU.
  • GPU fans don't spin, even briefly.
  • No video output from the GPU.
  • The GPU doesn't appear in Windows Device Manager.
  • I can boot into Windows and enter BIOS using the Ryzen 7800X3D's integrated graphics while the RX 9070 XT is installed.
  • The motherboard's VGA debug LED does not stay on.

The RX 9070 XT has never worked in this motherboard, not even once.

Everything I've tried

Power supply and cables:

  • Tested with MSI MPG A850G PCIE5 850W.
  • Swapped in my older SilentiumPC Supremo FM2 Gold 750W PSU.
  • Tried the Sapphire 16-pin to 3×8-pin adapter.
  • Tried the native 16-pin GPU power cable from the MSI PSU.
  • Checked power connections.
  • Confirmed the motherboard's additional PCIe power connector is connected.
  • My old RX 6750 XT works in the new PC.

Motherboard and PCIe:

  • Tested the RX 9070 XT in both PCIe slots.
  • Tried PCIe Gen3 and Gen4 settings.
  • Tested PCIe power management settings, including disabling ASPM.
  • Enabled Above 4G Decoding.
  • Disabled Re-Size BAR.
  • Confirmed UEFI mode is enabled.
  • Tried different BIOS configurations without success.

BIOS:

  • Originally running BIOS E7E56AMSI.2A75 (September 10, 2025).
  • Updated to E7E56AMSI.2A93 (September 3, 2026).
  • The BIOS update made no difference.

Cross-testing:

  • RX 9070 XT works in my older ASUS B550 PC.
  • RX 6750 XT works in my newer MSI B850 PC.
  • RX 9070 XT doesn't work in either PCIe slot on the MSI B850.
  • Changing PSUs doesn't fix the issue.

What I'm trying to figure out

Has anyone successfully used a Sapphire NITRO+ RX 9070 XT with an MSI PRO B850-P WIFI motherboard, especially with a Ryzen 7 7800X3D?

Could this be a motherboard compatibility or PCIe initialization issue, even with the latest BIOS installed?

Is there anything else worth testing before I consider an RMA for the motherboard?

At this point, the GPU works in one system, the motherboard works with another GPU, and I've tested two PSUs, multiple power connections, PCIe slots, BIOS versions and settings.

Any suggestions would be greatly appreciated. Thanks!


r/radeon • • 4h ago

What should I upgrade next in my gaming PC? Ryzen 5 7600X + RX 9070 XT | 1440p 320Hz + 4K 160Hz Monitor

2 Upvotes

Hi everyone!

I built/upgraded my gaming PC and would like some advice on what I should upgrade next. I’m particularly interested in getting the best possible gaming performance at 1440p and 4K.

Here are my complete PC specifications:

PC Specifications
Processor (CPU)
AMD Ryzen 5 7600X
6 Cores / 12 Threads
Boost clock up to 5.3 GHz
Graphics Card (GPU)
Sapphire Nitro+ Radeon RX 9070 XT
Motherboard
MSI MAG B650M Mortar WiFi
RAM
Corsair Vengeance DDR5
32GB (2 × 16GB)
5200MHz
Power Supply (PSU)
Corsair RM1000e
1000W
80+ Gold
Fully Modular
ATX 3.1 / PCIe 5.1
Storage
WD Black SN850X NVMe SSD
CPU Cooling
240mm AIO liquid cooler
Dual-fan configuration (2 fans)
Monitor
MSI 1440p gaming monitor
320Hz refresh rate
Also have a 4K display for high-resolution gaming


r/radeon • • 20h ago

Tech Support HELP HELP HELP

Post image
39 Upvotes

It's not going further in I can see color I heard that bad but I can't push it in any more than this


r/radeon • • 20h ago

MSI RX 7900 XTX – PTM PhaseSheet + Thermal Putty repaste results

Thumbnail
gallery
37 Upvotes

MSI RX 7900 XTX Gaming Trio Classic – PTM PhaseSheet + Thermal Putty repaste results
I wanted to share my experience with repasting my MSI RX 7900 XTX Gaming Trio Classic 24G after roughly three years of daily use and heavy gaming.
The card was still performing well, but I was no longer happy with the hotspot temperature and fan noise. Under gaming load, the GPU hotspot was reaching around 88–90°C, with the fans running at approximately 2,650 RPM.
After taking the card apart, I found the original thermal paste extremely dry and difficult to remove. The residue around the die also looked consistent with possible pump-out, although I cannot prove that from the imprint alone.
What I used
Thermal Grizzly PhaseSheet PTM on the GPU die
Thermal Grizzly Putty Pro on the main VRAM/VRM contact areas
Thermal Grizzly Putty Basic on the backplate contact areas
I replaced the original thermal interface materials and carefully reassembled the cooler.
Results
My measurements were taken during gaming, not in a perfectly controlled benchmark. The room temperature was approximately 24°C.
Parameter
Before
After
GPU temperature
~64°C
~58–59°C
GPU hotspot
~88–90°C
~77–82°C
Fan speed
~2,650 RPM
~1,940–2,140 RPM
VRAM temperature
~78–80°C
~71–72°C
The card is still running with an unrestricted power limit / +8% power limit. I did not reduce the power limit to achieve these temperatures.
The most satisfying improvement is the combination of a lower hotspot and significantly lower fan speed. The card is noticeably quieter while maintaining high gaming performance.
The PTM is still going through its thermal cycles, so I will continue monitoring the temperatures as it settles in.
Overall, I am very satisfied with the result. For my card, the repaste and putty replacement appear to have been worthwhile.
Disclaimer: These are my personal results. Different cards, cooler revisions, mounting pressure, ambient temperatures and workloads can produce different outcomes. Disassembly also carries a risk of damage and may affect warranty coverage.


r/radeon • • 8h ago

Discussion 668$ for 9070 vs 960$ for 9070xt

4 Upvotes

Dose the extra money worth it for XT model ?


r/radeon • • 23h ago

Just another box pic

Post image
57 Upvotes

Just another box pic

Sorry for another box pic… waiting for more parts to come in lol but I’m now team read!
1660 super -> 3070 Super -> 4070 Super FE -> 9070xt

Sold my 4070 build for a big move and needed the money… got a raise so it’s time to game again!


r/radeon • • 2h ago

Tech Support RX 9070XT back screen issue

0 Upvotes

When I am using hardware encoder on my 9070xt for video encoding or record at 50 to 60 min

The green screen shown in the display then goes blank and the system keeps running,

When I force shutdown and restart after windows startup driver won't detect gpu but gpu is giving display and integrated on device manager it gives code 31

I have to restart the system to safe mode then use ddu to uninstall the driver then reinstall

Does anyone have any solution to it


r/radeon • • 2h ago

Discussion Is that good for RX9070 ?

0 Upvotes

I have using XFX swift rx9070 oc 16gb. My adrenalin software settings are: -65 mv UV and 2650 mhz vram OC, PL still %0. Any tips from 9070 users ?


r/radeon • • 18h ago

fellow 9060xt owners, how well does 1440p run for yall?

17 Upvotes

Thinking of upgrading my monitor soon to a 1440p one, but wanna know how others find the performance hit of going from 1080 to 1440


r/radeon • • 1d ago

Seems like a 4K monitor is a better choice for 9070 XT buyers

Thumbnail
youtube.com
185 Upvotes

4K FSR 4.1 performance has better performance on average than 1440P native, with probably better visuals too. Outside of gaming, you'll always benefit from the additional sharpness. You'll have a more future proof monitor too. What do you guys think?


r/radeon • • 1d ago

SAPPHIRE NITRO+ RX 9070 XT

95 Upvotes

Unboxed. Installed. Perfectly in place.


r/radeon • • 4h ago

Tech Support RX 6600 black screen while gaming

1 Upvotes

I've had this problem with my gpu since I bought it. If I don't undervolt it from the default 2564Mhz to something like 2250mhz it will crash my pc with a black screen while playing certain games. And even if I do, it can still crash. I was playing Expedition 33 and my pc crashed while watching a cutscene but I was able to play through all of Cyberpunk without any issues.


r/radeon • • 1d ago

9800x3D and xfx 9070xt oc

Post image
62 Upvotes

First amd build, couldnt be happier.


r/radeon • • 5h ago

Persistent AMD Vega 7 Driver Crashes – Ryzen 5 4600G, LiveKernelEvent 141/117/1B0, Black Screens and System Freezes

0 Upvotes

Hi everyone! I've been trying to solve this problem for approximately 2–3 years, and I'm hoping someone here might help me identify the actual cause.

PC specifications:

- CPU: AMD Ryzen 5 4600G (integrated Radeon Vega 7 graphics).

- GPU: No dedicated graphics card.

- Motherboard: ASRock A520M-HDV.

- RAM: 16 GB DDR4 (2 × 8 GB PNY modules).

- Storage: Kingston 240 GB SATA SSD.

- PSU: Thermaltake Smart BX1 750W 80+ Bronze.

- Operating System: Windows 11.

- Graphics Driver: AMD Adrenalin 26.5.2 WHQL.

Description of the problem:

My PC randomly experiences graphics driver crashes, black screens, and system freezes.

Sometimes the screen goes black for a few seconds and then recovers. Other times, the entire computer freezes, the audio also stops or gets stuck, and applications stop responding or crash.

The problem can happen while gaming, watching videos, browsing the internet, or even when the computer is practically idle on the desktop.

One important detail is that the very first crash happened approximately ten minutes after I turned on the PC for the first time in 2024, before I had installed any games or additional programs.

Errors reported by Windows:

- LiveKernelEvent 141.

- LiveKernelEvent 117.

- LiveKernelEvent 1B0.

- THREAD_STUCK_IN_DEVICE_DRIVER (0xEA).

- AMD Crash Defender notifications.

- AMD reports indicating that the graphics driver stopped responding.

Things I've already tried:

- Reinstalled AMD graphics drivers multiple times.

- Used the official AMD Cleanup Utility to perform a clean driver installation.

- Tried different video connections, including VGA directly.

- Replaced the power supply, but the problem persisted.

- Tested each RAM stick individually. The issue occurred with both configurations.

- Ran Windows system file checks, which found no integrity violations.

- Disabled browser hardware acceleration, which reduced some browser-related crashes.

- Checked AMD Adrenalin settings. No custom overclocking or performance tuning is enabled.

Interestingly, the Microsoft Basic Display Adapter has remained stable, although performance is extremely slow.

My questions:

  1. Could the integrated Vega 7 GPU itself be defective?
  2. Could the motherboard or the CPU's memory controller be responsible?
  3. Could faulty RAM cause these GPU-related errors?
  4. Could installing a dedicated graphics card bypass the problem, or might the issue persist?
  5. What would be the best way to identify the faulty component without randomly replacing hardware?

I'd really appreciate any suggestions or advice from people who have experienced something similar. I've been trying to solve this for a long time, and I would really like to understand what's actually failing before spending money on new components.

Thank you very much!

#################

Update: MemTest86 results

I ran MemTest86 (version 11.7) overnight. It successfully completed all 4 passes with 0 errors.

This makes a RAM module defect less likely, although it doesn't completely rule out memory-related issues.

I still haven't tested the system with a dedicated GPU, which could help determine whether the integrated Vega 7 graphics are responsible for the problem.

I'm continuing to investigate before replacing any components. Any suggestions are welcome!