r/roasting • • 1h ago

Kaleido M6 Roaster sale or ever discounted?

0 Upvotes

I notice the Kaleido M10 is always on sale, but I don't think I have seen the Kaleido M6 on sale. Does anyone know if it ever goes on sale and when? I really don't want such a large roaster but if the upgrade is almost the same price as the M6 it feels dumb to buy the smaller one.


r/roasting • • 4h ago

Happy Sunday

Post image
11 Upvotes

r/roasting • • 5h ago

First ever roast

Thumbnail
gallery
20 Upvotes

This is my first ever roast of a Brazil Coletivo natural from Caparao region. Roasted 333g, charged at 195 and got dripped after 1:30 after FC. Weight loss is 15.6%. Only thing I noticed is some beans are a bit charred at the middle, and perhaps I got a bit of tipping. Total roast time was just under 11 minutes. What can I improve? Thanks for suggestions :)


r/roasting • • 5h ago

Smoke problem

Post image
2 Upvotes

Hey, roasted my first ever batch yesterday. Despite the ducting, the smoke came back inside due to the colder outside air and I smoked the whole apartment building. Here is my setup, any ideas how to solve this? Thanks!


r/roasting • • 21h ago

Advice for selling home roasted coffee

7 Upvotes

I've been thinking about trying to sell some of the coffee I roast and would love to hear from those of you who have experience selling home roasted coffee.

I currently use an SR800 w/extension tube, so I know my production capacity is limited and time consuming. I'm more so wanting to start small and gauge interest from friends and family and just go from there.

A few questions I had were:

  • How did you get started?
  • Did you start with friends and family, farmers markets, social media, etc.?
  • What challenges did you run into that you wish you'd known about beforehand?
  • At what point did you decide it was time to upgrade your roasting equipment and what did you upgrade to? This is probably my biggest question.
  • Are there any legal requirements or food safety considerations I should look into before selling?

I'd appreciate any advice or insight. Thanks!


r/roasting • • 1d ago

Is the weakness the strength with pan roast?

Thumbnail
gallery
0 Upvotes

I pan roast my coffee with in a cast iron skillet. The roast always looks uneven which seems to be frowned upon. However I love the coffee.

I like to let the darker beans become dark and oily. I prefer it to speciality roasts I have got, which I find too light. Really dark roasts are too burned tasting for my liking. Does the unevenness give some complexity?

I tried roasting in a heavy bottomed stainless steel skillet and it was more even, but didn't taste as good. My latest batch (pictured) I tipped out 75 % of the beans, when a little lighter than I would normally go, then continued to roast the remainder. Am I a misguided amateur or have I discovered something that is genuinely great?


r/roasting • • 1d ago

Thinking of upgrading

7 Upvotes

I started roasting on a freshroast sr540 and used that a couple years and upgraded to an sr800 (both with extension chambers). I use artisan to watch the roast progress using an amprobe tmd56 multimeter. Typically roast 300 gms about every 4 days. This is just for the 2 of us, I don't sell any at craft fairs or anything. I gift some to our adult kids on occasion.

I'm thinking about a kaleido m2 lite. Wondering about learning to control the roast rather than monitoring the roast with Artisan. How challenging is it to develop a roast profile and use it?

Also a little worried about no manual controls at all. If a circuit board fails in a couple years do I now have a $1200 boat anchor?


r/roasting • • 1d ago

Best book about coffee roasting and advice on robusta beans

Thumbnail
gallery
4 Upvotes

Hey, so basically I have build my own coffee roaster a little while back, and do some home roasting for myself, but I often come to realise I don't know what the f* I am doing. Basically I know a few basic notions, I programmed a temperature curve once in my roaster based on what I found online, and th only think I change from roast to roast is how much time I let the beans develop after first crack.

I am currently in Brazil and went in a cafe where the owner roasts his own beans, and bought some organic 100% robusta beans from Amazonia from him. He tried to explain to me how to roast them, but I didn't get all of it due to a bit of a language barrier and because I didn't understand every step and why he chose such and such temperatures.

And I was wondering what would be the best book to learn everything I would need to know about coffee roasting. As I said I know some stuff like the different phases during the roasting process, first crack, second crack, development, but I don't know about the specifics, I struggle to make choices and to know what temperature of what curve would be better for specific beans and why.

Would you guys have any good books that cover everything in coffee roasting, that are technical and precise but also explain some of the basics I might be missing? Thanks in advance!

PS: about the robusta beans, I didn't quiet understand everything he told me. He drew a super quick graph in the counter to try to show me the curve and temperatures (linked photo). He told me:

Start at 202 °C

Stop the heat and turn up the air at 194°C

The end temperature should be between 208 and 212°C

What I don't get is that if I turn off the heat at 194°C the temperature would drop and not continue rising until 208-212. What I thought is that maybe his drum roaster (Carmomaq Stratto) has a lot of heat inertia and that even if the heating element is turned off the heat still rises due to the temperature of the drum. If this is true, it wouldn't be applicable to my roaster because it is a fluid bed roaster, the air blows from underneath of the beans, mixing them around, but if I turn off the heating element the temperature quickly drops. Also he told me that he roasts them for 9 minutes, but on mine, my roasts are usually around 10-11 minutes. Keep in mind I never roasted robusta beans. Lastly he informed me that those beans don't really crack loudly like arabica, but I don't know if he meant that simply as information or if he was trying to tell me that i shouldn't really pay attention to the first crack.

Some help or insights would be so much appreciated. I will link a picture of his roaster, of my roasted and of the little graph he drew me to this post.


r/roasting • • 1d ago

Roasting decaf ?

8 Upvotes

About to try my first decaf roasts on my Kaleido M2 Lite. Any tips?

Any recs for good decaf green beans that won't break the budget?


r/roasting • • 1d ago

Black Friday green bean deals

12 Upvotes

As Black Friday approaches, I was wondering if anyone know if there is a site or discussions for all the deals on green beans?


r/roasting • • 1d ago

My first roast

Post image
46 Upvotes

I picked up a stainless steel stovetop popcorn popper at Costco for $30, and roasted my first batch ever. I think the pot got too hot, but other than that, it was fun! So eager to try a cup tomorrow.


r/roasting • • 2d ago

Which harvest date do you ask for when a green lot sheet only gives the year?

1 Upvotes

When a green coffee offer only lists the harvest year, what extra date information do you ask for before choosing samples?

Would you ask for the picking period, when drying finished, when it was milled or when it arrived in storage? I'm curious which answer has actually been useful to you, especially when comparing coffees harvested at different times of the year.


r/roasting • • 2d ago

Two Colombian samples: apple and caramel beside dark fruit

Post image
1 Upvotes

The tasting sheet records crisp apple, pear and caramel for washed Pink Bourbon CO2611 from 88 Graines, scored 86. It records cherry, ripe blackberry, dried fig and dark fruit compote for Crimson Red FL020 from Flizzco, scored 87.

The FL020 reference matches the supplier listing, but the varieties differ: the handwritten sheet says Caturra and the supplier lists Castillo. With producer and processing also changing between samples, how would you set up the next tasting to make the comparison more useful?


r/roasting • • 2d ago

Roasting Simulator

Thumbnail github.com
11 Upvotes

r/roasting • • 2d ago

Need help improving this roast

Post image
5 Upvotes

Hi all,

I roasted this Indonesion Gayo anaerobic fermented beans, and my goal was to roast it med light for v60. I waited till today to give it a try and it has a strong olive note to it with little hint of smokiness. What did I do wrong here and what part could I improve with?


r/roasting • • 3d ago

Help! Mechanical whirling on Kaleido M2 Lite

1 Upvotes

Can anytime help me determine what's going on? I bought the Kaleido M2 Lite and never had any issues with unusual noises until my 6th roast. Id normally hear a quiet hum after plugging it in. When plugging it in for my 6th roast, it made a loud whirling noise from the back of the machine. This noise would persist for about 3 minutes before transitioning into the background hum I am used to hearing.

The drum, airflow, and burner are all off when you hear this noise. It starts immediately upon being plugged in. It never comes back after it transitions to the background hum for that session. I always hear it again when I want to roast on a different day, and it follows the same pattern described above. When finishing a roast and unplugging it, there won't be a whirling noise again when I plug it back in right away.. just regular background hum. The issue always resurfaces when I want to roast on a different day when the machine has been off for a while.

The only cause I can think of is accidentally leaving it plugged in and idle for two days on accident (after my 5th roast).

Seems benign but it's kinda annoying to hear every time.

Any insight would be amazing, thank you for reading this!


r/roasting • • 3d ago

Anyone Using PID Roasting With Artisan?

3 Upvotes

Good morning from Rainy California, very unusual for us. I am exploring to roast with Artisan 5.0.0 and my Fresh Roast SR-900, in which Artisan uncluded the SR-900 as one of the machines it supports but I notice that it does have some kinks and glitches. I asked AI how to set it up and because the intended setup that loads when I choose SR-900 as my machine but it does not worked so I started working with the PID setting but found several problems. The most noticeable is the RoR that jumps all over the place with the use of the PID's and I know because if I don't use them the roast does not have the exaggerated jumps as when using them. trying to maintain temperature, it changes heater setting almost every second and I am afraid it will cause the SR-900 to fail sonner. not counting the fact that I have not found a way to control the Fan settings. If anyone of you have any idea how to work with PID settings I will appreciate your input.


r/roasting • • 3d ago

Ethiopean coffee roast

Post image
17 Upvotes

This was my ethiopean coffee roast i did last night. I performed the roast on hot plate with rotating arm. There are some charred beans that i removed. How would you improve the roast so you can get those finer ethiopean flavors. Below is my roast temprature of the plate. I dont have coffee bean temprature measuring device:

Nov 18, 2026 Batch: 200g green → 163g final (~16% loss, Full City) | Cold garage
​Preheat: 140°C ​0:00 (7:36 PM): 140°C → 150–160°C | Charge & Drying ​~2:00 (7:38 PM): 165–170°C | Drying (lid closed for cold air) ​~5:00 (7:41 PM): 200–210°C | Yellowing — even pale yellow
​~8:00 (7:44 PM): 220–230°C | Early Maillard — golden-tan
​~10:00 (7:46 PM): 240°C (MAX) | Mid Maillard — golden-tan to light cinnamon
​~13:00 (7:49 PM): 240°C (MAX) | Late Maillard — cinnamon-brown, light haze
​~13:30–14:00 (7:50 PM): 240°C (MAX) | First Crack starts ​~15:00 (7:51 PM): 240°C (MAX) | City — medium brown, light smoke, heavy chaff
​~18:00 (7:54 PM): Off | Drop — pulled due to one-sided scorching and dark chaff


r/roasting • • 3d ago

First Timer

Thumbnail
gallery
21 Upvotes

First time roasting coffee, ever.

Carbon steel flat bottom wok over medium-low flame for 23m after baking at 250F for 40m.

So much color diversity, how to get more homogenous roast?

Would love feedback and pointers.


r/roasting • • 3d ago

How to get into roast?

5 Upvotes

How does a coffee enthusiast begin getting into roasting?

What are my options if I want to eventually experiment and increase my growth if I truly enjoy enjoy roasting and keep reproducing the same roasts and then transitioning into a roasting small batch specialty coffee beans?

From what I’ve read, seems like Skywalk is a good beginning machine? And a good source for green beans is Sweet Maria’s.


r/roasting • • 3d ago

Looking for a source for 120mm burrs for vintage Mahlkonig VTA6S.

1 Upvotes

Anyone know of a second source for good 120mmburrs that would fit a vintage VTA6S that I am restoring. I don't know the vintage but the thing was virtually free when I bought a container of equipment from a failed roastery. Location is the Philippines but I travel frequently to the US. OEM burrs are a shocking $600.

TIA


r/roasting • • 3d ago

First roaster - SR900 or M1 Lite

6 Upvotes

Hey guys, new here and also just trying to get into coffee roasting. I've been pouring over threads about the best first time roaster, but most of them are old and vary on a case by case basis so I thought id try my luck asking for myself.

Between my wife and I we drink a double shot espresso each a day. She blends decaff with regular grind to make a half caff. I'm stuck between picking between the SR900 that should be back in stock next week and the M1 Lite for our first roaster. Seems like the SR900 would be easier to work with, but the M1 Lite would be better overall once we learned what we're doing with it. We're also trying to stick around that $500-$700 price point or I'd definitely just get the M2 Lite and be done.

Anyone here gone from a fluid bed roaster like the SR800/900 to a drum style like the K1 or K1 Lite? How do you like it? Is there a noticeable difference flavor profile? We just want to get the right one right off the bat so we dont have to waste money upgrading in the near future.

Edited to add - We have two PC's and tablets at home to remote into them with for Artisan if we go the K1 Lite route


r/roasting • • 3d ago

Newbie question about a roaster

9 Upvotes

I see a lot of people buy the fresh roast 800 and 900.

My question is I am thinking either of those or the kaleido m2 lite with artisan. I have zero experience in roasting. This is the first purchase I would be making. I just love coffee, espresso and hobbies and want to try it and hopefully get good enough to have fresh coffee for my family and try to impress a friend here and there.

Would love your thoughts good and bad.

Thanks


r/roasting • • 4d ago

Fine details of a Colombian roaster Huaska

Thumbnail
gallery
14 Upvotes

Every part, including the metal components, was designed with great attention to detail 👌