r/robotics • • 2h ago

Community Showcase I built my own Arduino-based 180° radar system – Ali's Radar (custom code + active cooling)

0 Upvotes

Hey, I'm Mad Mohammad Ali!

I wanted to share a project I've been building called Ali's Radar — an Arduino-based ultrasonic radar system with a 180° scanning mechanism and a live radar interface on PC.

This project is built around my own ideas, experiments and custom-written code.

⚙️ Main Features

- 180° servo-controlled radar scanning

- HC-SR04 ultrasonic object detection

- Real-time radar visualisation on PC using Processing

- Live object distance measurement

- Servo-based scanning mechanism

- Joystick controls for manual radar operation

- OLED display integration (planned)

- Active cooling system

- Custom Arduino and Processing code written by me

🎮 Controls

The system includes a joystick-based control setup:

- VRx: horizontal control

- VRy: vertical control

- SW: joystick button input

The radar also has an ON/OFF control and adjustable scanning behaviour.

❄️ Active Cooling System

I also worked on an active cooling system as part of the project. I wanted to make the setup more than just a basic radar demonstration.

💻 Programming

The Arduino handles the sensor, servo and control inputs, while Processing handles the radar-style PC visualisation.

The code is custom-written by me. I developed and modified the Arduino and Processing sides while testing the system.

🔧 Current Status

The project has had its share of failures and problems during development. Some parts work, while others still need troubleshooting and improvement.

I'm sharing it because I want to document the journey, learn from other makers, and keep improving Ali's Radar.

This is a personal DIY engineering project, and I'm still working on it.

Thanks for checking it out! 📡


r/robotics • • 2h ago

News From the IndiaInvestments community on Reddit: SS Innovations Robotic Surgery India

Thumbnail reddit.com
0 Upvotes

r/robotics • • 5h ago

Perception & Localization "SuperMimic: Scaling Humanoid Whole-Body Control with One Differentiable World Model", Liao et al 2026

Thumbnail
youtube.com
23 Upvotes

r/robotics • • 6h ago

Electronics & Integration SRS Smart Rapid Segregator ♻️

Thumbnail
youtube.com
1 Upvotes

❤️ A Small Request, A Big Dream!
I'm excited to share that I'm participating in a National-Level Robotics and Re/el Making Combo Competition! 🚀
As part of the eligibility criteria, I need to reach 500 YT subs. I'm currently working towards this goal
Current - 83/500

Every single sub would mean a lot to me and bring me one step closer to this opportunity. Your small support could make a big difference in my journey! ❤️

🔗 My YT Channel:
SRS Video

Thank you so much for your support! Let's make this happen! ❤️🙏

Guys pls Subscribing is Free of Cost
Thanks to those Great People who have subscribed ❤️

pls do see all videos


r/robotics • • 6h ago

Tech Question What in the robotics is this?

0 Upvotes

I found this in my nephew's home, it hovers over the floor as in zero friction, no strong air flow is observed. Yet its hovering. Somehow :/x


r/robotics • • 8h ago

Discussion & Curiosity Does this little robot have a personality?

0 Upvotes

Saw this little sheep robot ask for a hug. Its arm moves as part of the gesture and knocks over the cup beside it.

I know it could just be a programmed sequence, but wonder do robotics people now deliberately design this kind of personality-like behavior? and if yes, are we supposed to “emotionally interact” with the robots?


r/robotics • • 9h ago

Community Showcase Cutting Food

16 Upvotes

We built an agentic usd simulation data factory. Our focus is on non-rigid simulations. We are currently working on our first evaluation LeRobot dataset to be published on hgf.


r/robotics • • 18h ago

Tech Question Trying to tune motors on Waveshare Roarm M3

3 Upvotes

Hey yall,

I bought this robotic arm to start working on automating some pick and place tasks on my benchtop, but I am having trouble tuning the motors. Whenever I move any motor the tip of the arm starts to sag, which I read is gravity sag. When I tried doing a PID sweep, and while I found parameters that got rid of the sag a bit (I can't have my TCP moving alot while descending), it seems I have introduced some shaking, and I can't find a set of parameters that moves very smoothly, which is confusing because I think the arm has a repeatability of like 3mm.

Thank you so much for your help! I am really stuck

Here is a video of my arm moving.


r/robotics • • 22h ago

Humor First robot I saw in the wild. It had rolled past me 6 ft and I jokingly said out loud "How rude, didn't even say hello." AND I THINK it HEARD ME! 😂

95 Upvotes

r/robotics • • 23h ago

Community Showcase Google Gemini in the cloud driving a small robot dog

15 Upvotes

Hi, I'm RZ Li, founder of Petoi. Google Gemini (gemini-3.8-live), running in the cloud, handles the conversation for our quadruped, Quaddle. I give one spoken request with three moves: walk two steps, turn right 60°, shake hands. It runs them in order, then reports that it's finished.

The robot has two ESP32-S3 chips:

  • ESP32-S3FN8 (Motion Core)
  • ESP32-S3R8 (AI Core)

The AI core on a removable hat connects to Gemini. The motion core runs OpenCat, the open-source framework I started, and does the gaits. So the model is swappable: Meta's Muse connected through the same AI core before Gemini.

We will open source the firmwares next month, so anyone can connect to their favorite LLM.

What would you like your LLM to do with your robot?


r/robotics • • 1d ago

Community Showcase Tag of Flag: Concept Demo 2

18 Upvotes

The demo shows SO-101 can have a controller box doing smooth teleoperation through a hotspot connection on a smartphone (geez, after a whole day setting up Bluetooth, its latency is crazy lagging, so data roaming it is). The interference can be resolved using ROS_DOMAIN_ID. The demo shows the blue dog CD-07B Wouf carrying SO-101 follower walks up to the white dog CD-06Z Doggo in a standing position on face-to-face contact (becuase of the wires, the contact is actually rather soft). Wouf grips the flag on Doggo and does a horizontal swipe to quickly dislodge the flag. The move made Wouf tumble a few several times though, so have to swipe with caution (also poor Doggo is not really not built for this type of workout). Overall, I think ToF is very playable :)

One more demo after this one, and hopefully there will be another robot dog joining in for an actual match :D


r/robotics • • 1d ago

Community Showcase Built an open-source Blender tool to visually rig robots & configure MoveIt 2 motion planning (LinkForge)

Thumbnail
gallery
22 Upvotes

Hey everyone,

I’ve been working on LinkForge, an open-source Blender addon designed to make robot modeling and simulation prep less painful.

I just added a Planning Panel so you can set up kinematics and MoveIt 2 planning without leaving Blender:

  • Set up kinematic chains and planning groups visually in the 3D viewport.
  • Pose your robot directly in Blender and save named poses (`home`, `crouch`, etc.).
  • Auto-generate Allowed Collision Matrices (ACM) using a built-in kinematic sampler.
  • Export clean URDF + SRDF in one click.

It’s completely free and open source:

Feedback, ideas, or feature requests are welcome!


r/robotics • • 1d ago

Community Showcase Starting work on a wheeled version. Day 389 of building Asimov, an open-source humanoid robot

120 Upvotes

Asimov just got wheels for the first time, and it's been a lot of fun to see it roll around the office. We think of Asimov as a design you can build many robots from, not one fixed machine. Some builds need legs, some need wheels, and this is our first step in that direction. Grippers are coming next!


r/robotics • • 1d ago

Resources Need solution manual for reza najar theory of applied robotics

0 Upvotes

Pleaseee i need the manual asap i need to submit a hw in less than 24 and i have been trying to solve it for 2 days and i just can’t 🥹🥹🥹 no AI is helping each give me a different answer i just can’t find an answer.


r/robotics • • 1d ago

Perception & Localization Hooked my RGB SLAM Camera into the Game Saltline

1 Upvotes

Been playing Saltline a lot lately, that new AI-built exploration game, and at some point I got an itch to tinker, so I wired in my RGB SLAM camera RoboBaton Neo.

That led to a bigger idea: if I strapped this thing to a kart, could it draw every lap I run as a map?

In my head it looks great, pull the track file off after a session, drop it on a map, and you can instantly see where you braked early or carried too much entry speed.

Haven't actually tried the kart part yet though, and I have some questions before I tape anything to it:

⭕ Karts move fast — can a consumer-grade tracker keep up with the sampling rate? Or does the line just turn into spaghetti?

⭕ These things vibrate like crazy. Any tips on mounting? I don't want it flying off mid-corner.

⭕ Has anyone actually done this? What setup did you use?

I know proper data loggers exist for this, but half the fun is doing it with stuff I built myself. Anyone tried it?


r/robotics • • 2d ago

Community Showcase A coding agent folding a piece of cloth in Isaac Sim

11 Upvotes

Teleoperation data is one of the biggest bottlenecks in training manipulation policies, especially for deformable objects like cloth.

We've been building a pipeline where an AI coding/planning agent generates task sequences and executes physics-validated motions directly in simulation. It does NOT need a human seed demonstration first.

In the demo video, you see:
- Left: Real-world Unitree G1 human teleop episode (included purely as a visual baseline, it's NOT used as input).
- Middle & Right: Egocentric and third-person views of a synthetically generated episode in Isaac Sim.

We used the same simulation and validation pipeline from our open repo here (which also has LeRobot datasets, MuJoCo/Isaac Sim episodes, and validator checks for G1, Stretch, and H1-2): https://github.com/RareSense/robot-episodes

Next step is benchmarking VLA policies trained purely on such synthetic data against real teleop data to see how well deformable contact dynamics transfer.

---

Happy to collaborate with anyone here who wants to augment their training data with high-fidelity, synthetic examples


r/robotics • • 2d ago

News ROS News for the Week of November 16th, 2026

Thumbnail
gallery
9 Upvotes

r/robotics • • 2d ago

Resources Looking for STS 3215 Bus Servo

0 Upvotes

Hey all,

We are working on a project and requires STS3215 17Kg or 19Kg. If you are trying to sell one or if you guys know where i could get one for cheapest, please do share.

Thanks!!


r/robotics • • 2d ago

Community Showcase I built an open-source "GoPro" on a Pi Zero 2 W to collect robot training data

30 Upvotes

Robot learning projects like Stanford's UMI (Universal Manipulation Interface) collect demonstrations with a handheld gripper and a GoPro, then train a robot on that footage. I wanted something open and hackable, so I built LUMI.

Hardware (stacked bottom to top):

- Waveshare UPS HAT (C) battery (30–45 min of recording + Wi-Fi)

- Raspberry Pi Zero 2 W

- Waveshare 1.44" LCD HAT (128×128, 3 buttons + joystick)

- Arducam IMX477 HQ camera + CS-mount fisheye on the 22-pin CSI flex

- MPU-6050 IMU on I2C, sampled at ~200 Hz

It mounts on the handheld gripper like a GoPro. Press the stick to start a take; the screen shows the dataset, episode, battery and storage. In practice it's one demo every ~8.5 s, including starting and stopping each recording.

The trick is that UMI doesn't need "a GoPro", it needs GoPro-shaped files: GoPro file names, H.264 + an audio track, a GoPro-style metadata track with accelerometer and gyro at ~200 Hz, timecodes and a camera serial. LUMI writes all of that (the audio track is silent; there's no mic yet), so the existing UMI SLAM pipeline reads it unchanged.

What I learned fighting the Zero 2 W:

- The H.264 encoder refuses frames over 8,192 macroblocks, and the full-view 2028×1520 mode is 12,065. So the full sensor is scaled to 1440×1080 at 30 fps, keeping the whole fisheye circle.

- RAM, not CPU, was the bottleneck. With ~415 MB usable, memory pressure caused dropped frames. Capping the kernel's unwritten-data buffer at 16 MB and shrinking the display's reserved memory from 256 to 128 MB fixed most of it.

- A 32 MB write buffer lets the camera keep recording through SD card stalls of up to ~17 seconds, and saving a take runs in the background on core 3, so the next take starts right away.

- Motion blur kills SLAM. Stock auto-exposure held the shutter open for the full 33 ms frame indoors. Capping it at 8 ms and turning denoise off (to keep fine texture like wood grain) got tracking working, but only 70% of episodes survived (103 of 148).

- Fast wrist turns caused most losses. Cutting the shutter cap to 4 ms, raising the bitrate from 15 to 25 Mbit/s, and using the gyro to undo the sensor's ~24 ms rolling-shutter readout helped, but the biggest win was building several SLAM maps, keeping the best and retrying failures: 110 of 247 episodes kept became 221 (89%).

- The IMU FIFO is drained every 40 ms; a stall over 425 ms overflows it, and the recorder starts a new segment instead of silently losing data.

- Desktop images ran out of memory with the encoder and Wi-Fi together, so it runs Raspberry Pi OS Lite 64-bit. The original Pi Zero is too slow.

Setup is one script (it enables I2C, SPI and the camera overlay, installs a service and a Samba share), and you can watch a live preview from your phone.

Next steps: a bigger battery, a better IMU, and an I2S microphone. It's open source (Apache 2.0); code, wiring and CAD are linked in the comments. I'd love ideas on the case and the battery.


r/robotics • • 2d ago

News 2027 industrial robotics outlook: Demand is growing beyond automotive

Thumbnail automate.org
14 Upvotes

North American robot orders rose modestly in the first half of 2026, even as automakers ordered fewer robots. Growth in electronics, life sciences, food and consumer goods, and metals helped offset the slowdown.

In 2027, manufacturers running smaller batches will need robots that can switch between products without long changeovers. For smaller shops, the cost of connecting a robot to existing equipment, training operators and maintaining it will factor into the decision to buy.

AI could help robots inspect a wider range of parts and handle objects that vary in shape or position. Manufacturers will judge those systems by how reliably they run and whether they reduce defects or increase output.


r/robotics • • 2d ago

Mechanical I’m a student in Japan, and this is the robot I designed for KOSEN Robocon

80 Upvotes

In this year’s KOSEN Robocon, the goal is to toss a cleaning cloth so it stays draped over a pole 4 meters away. Both teams throw cloths to score points, and the team with the most points wins.

I designed our team’s catapult. It uses compressed air to move a rod that launches the cloth. I’ll post a video of it in action in the comments!I designed the catapult you see in the video. I added slide rails to help absorb the shock during each launch. I also ran several stress analyses on the whole assembly to find where stress was concentrated and reinforced those spots.

And yeah, we won the match using the mechanism I designed!


r/robotics • • 2d ago

Resources Spring Physics mathematics and implementation for simulation programmers

Thumbnail
youtu.be
2 Upvotes

I explain the mathematics underpinning spring mechanics then implement a solution in C++ using a net as an example. Implementation begins at 10:05. Feedback is welcome.


r/robotics • • 2d ago

Tech Question Sanity check: upgrading a micro:bit maze robot vs. building a proper micromouse-style design?

0 Upvotes

I'm mentoring a team of four kids for a maze competition: 30 cm squares, black walls, 5-minute limit, find the exit using a wall-following (hand) rule. Last time the robot (micro:bit V2 + DFRobot Maqueen Plus V3, front ToF only) drifted into walls because it had no feedback while moving: 3–19 cm sideways over 120 cm.

Plan A (upgrade): add left and right ToF sensors (DFRobot SEN0628) plus a gyro (MPU6050). Steer to keep the side gaps equal, turn 90° by gyro, use wall edges to tell where a square ends, drive at about 20 cm/s. Our simulation says about 99% of runs reach the exit, but the simulation has assumptions.

Plan B (switch): a micromouse-style build (Arduino/ESP32, ToF wall sensors, encoder motors, gyro).

Questions:

  1. Does Plan A sound sound, or is there an obvious flaw (sensor choice, speed, no wheel encoders we can rely on)?
  2. For side walls at 5–15 cm, would you use matrix ToF, single-point ToF (e.g. VL53L0X/VL53L1X) or IR reflectance, given the walls are black?
  3. MPU6050 vs a newer IMU for repeatable 90° turns: does it matter in practice?
  4. What real tests would convince you that Plan A is reliable before the competition?

Appreciate any honest critique.