r/rocketry • • Jun 21 '20

Announcement r/rocketry now has a Discord server!

83 Upvotes

Feel free to join the r/rocketry Discord server! Click here for invitation link.

We intend this to be a place where any user can get a quick response from knowledgeable rocketeers, as well as a more appropriate place for content related to rocketry, but that doesn't quite fit the sub. Any and all discussion is welcome and there are appropriate channels for many relevant topics.

Please suggest server improvements in the #server-suggestions channel or in the comments below.


r/rocketry • • Dec 20 '25

Minor subreddit update- all posts require manual mod approval

57 Upvotes

Several months ago, this subreddit was inundated with repeated off-topic posts from a well known troll/spammer. Bans did not work because the user just came back with a new account.

To combat this, it was decided to implement a rule where all posts require manual approval from a moderator. If you noticed the spammer hasn't posted here in a while, that's why.

Unfortunately, this means posts will only go live when a moderator is online and checks the mod queue, so there may be a delay of many hours before posts show up. Mods have jobs and lives outside of reddit. You are not shadow banned.

Several users have been sending mod mail after every post, thinking this will help their post be approved faster. This is unhelpful- we will see the mod mail the same time we see the post in the mod queue. Please stop messaging moderators about this.

If your post is not approved, that means it violated some rule. You may have also noticed there are fewer posts recently with low effort questions about unsafe ways to make motors (violating rule 2)- this is why.


r/rocketry • • 6h ago

Question How do you mitigate mach rash

5 Upvotes

I don't want the skin of my rocket peeling off and making more drag​


r/rocketry • • 1d ago

Gf asked me about rockets this morning.

Post image
129 Upvotes

r/rocketry • • 9h ago

Showcase Electronic recovery.

Post image
6 Upvotes

I'll be utilizing the ESP-32 board, atmospheric pressure sensor, 9v batterie and a servo.

3D printed components should be finished in the morning. If everything works out, i will place the recovery hardware on cults3d.

#Sheltechllc #SpaceX #experimentalrocketry #Arduino #ESP32 #diy #arizona #Program #3dprinting #aerospace #electronics #aerospaceindustry #Servo #Custom #Science


r/rocketry • • 5h ago

Question Level 2 rocket motors

1 Upvotes

Hi, Im a high school student out of Chicago, and i was hoping to get a couple of L2 launches in, in a upcoming December launch. Does anyone in the Chicagoland or Illinois area have any 54 mm L2 motors I could buy off of them? Thanks!


r/rocketry • • 22h ago

Where to get rocket motors in UK?

6 Upvotes

I can't get any good or powerful rockets online, understandably. But I don't know where else to get motors.
Im looking for a D (or higher) motors

Anyone from the UK got any ideas?
Thanks:)


r/rocketry • • 1d ago

Question Guys need your help

0 Upvotes

See i want to make a solid rocket motor it a K to L class rocket motor i am have very hard time deciding the parameters of outer casing and which material and thickness to chose can you guys help

Avg pressure = 556.65 psi

Peak pressure = 750 psi

Impulse = 2.4kN

Nozzle throat = 14 mm

Exit diameter = 30 mm

Converging half angle 50 deg

Diverging half = 11 deg

Total length 500 mm

First 150 mm from Nozzle finocyl with 17 mm core and 4 fins

Rest 350 mm bates with 17 mm core

And outer diameter is 46 mm for fuel grains

Fuel is smiler to cherry limeade

I Follower metric system.


r/rocketry • • 17h ago

Showcase I built Vector Rocket Lab a browser-based 6 DOF rocket simulator that simulates airframe shredding, fin flutter, and unstable loops.

0 Upvotes

Hey guys, been working on this browser rocket sim for a bit and wanted to share a quick clip before I open it up to everyone.
I wanted something where you can actually see what happens when a design fails instead of just looking at graphs like dynamic pressure shredding a cardboard tube, fin flutter, or unstable loops, and then hit a button to fix it.
Right now I'm adding more motors.
Before I release it, what's the biggest thing OpenRocket is missing that you'd actually use? Would love to hear any ideas or feedback on what's in the video.


r/rocketry • • 1d ago

Discussion Could a scramjet-turbojet hybrid engine replace rockets?

Thumbnail reddit.com
1 Upvotes

r/rocketry • • 2d ago

Showcase My next project after the Saturn V: a Space Shuttle launch stack engineering cutaway!

Thumbnail
gallery
40 Upvotes

After all the great feedback on my 60 cm Saturn V cutaway, I decided to start a whole series of rocket and vehicle engineering cutaways.

The next one is Space Shuttle Discovery STS-31 at 1:144 scale!

I'm recreating the external tank with its LOX and LH2 sections exposed, one SRB showing its segmented casing and propellant grain, and the orbiter with its structural and propulsion systems visible.

The CAD model is now in testing and refinement for 3D printing. I'm aiming for substantially more engineering detail than the Saturn V while keeping it practical to print and assemble. It's a static display model, not a flyable rocket.

I'd really appreciate any feedback on the launch vehicle engineering. Are there any important systems or components you'd like to see exposed before I finalize it?

And what other historic launch vehicles would you like to see as cutaways?


r/rocketry • • 2d ago

Question 星舰推进器尾焰末端的烟雾是什么

Post image
25 Upvotes

甲烷燃烧后不应该只有水后co2吗,为何会产生褐色的烟雾


r/rocketry • • 2d ago

Question Why rockets

25 Upvotes

what drives you guys to work on rockets, be it the propulsion, structurws, electrical or what other subsection.

This might be a lil sentimental but I’m in a small country and rockets are generally frowned upon but I really do like rockets and have Built them. I genuinely love what I do and find making them interesting.

However a while ago I wanted to make an interest group for it but i got hit with the question what good does a rocket do - too many people auto assume it to be related to dangerous things which I get but I genuinely am enjoyed in rockets And fast moving rockets expecially! i was hoping for ideas from yall as to why rockets


r/rocketry • • 2d ago

Help with Servo to Fin connection

Post image
9 Upvotes

I'm making this stabilization segment for my rocket and these servos are connected to a gyro to fix orientation problem is I tried this connection in the image but the slightest push or nudge made the whole thing move and the fin fell off so what's a better way to connect the servo's horn to the fin to allow rotation


r/rocketry • • 3d ago

Question Instability/Weight Issues

Thumbnail
gallery
218 Upvotes

Hi!

I'm a HS Student and in my Rocketry class we are making experimental motors following our L1 Certifications, we are reusing the same rockets. My groups motor is estimated to be a J-599 and in OpenRocket I'm having major issues with stability (-.685) from that motor in my current rocket as just the motor weighs more than the entire dry weight of my rocket. And I'm stuck on solutions besides adding weight to the nose area, does anyone have any suggestions or is that basically my only option?

Thank you!


r/rocketry • • 4d ago Popcorn

Showcase Mystic Buzz K456

Post image
227 Upvotes

Flew to 4577ft


r/rocketry • • 3d ago

Question Chamber 3D printing w/ Xometry?

2 Upvotes

Hi all. Has anyone here printed a regen chamber with Xometry's AlSiMg 3D printing? How's the quality of the channels? Any blocked channel / any cracking of the thin inner liner walls? Thanks.


r/rocketry • • 3d ago

Filar: Custom filament winding software

Thumbnail
youtube.com
18 Upvotes

This is my side project, happy to share it with folks who are interested.


r/rocketry • • 3d ago

Question Possibility of L3 mentor for high school team

7 Upvotes

Hello, I am with the Batavia Aerospace Team, and for an upcoming project, we are looking for the possibility of partnering with an L3 mentor to oversee and assist with our launch. We have an L2-certified team sponsor, so if this isn't something that would be possible, we can downsize to a 75mm L motor. However, for our goals and the post-flight report/data we are looking to collect, a 75mm M motor would help us achieve those objectives.

All funding would be provided, and we primarily fly out of the Quad Cities Rocketry Club. If anyone is interested or willing to help out, I would be thankful for the opportunity to get in contact.

Thank you!


r/rocketry • • 3d ago

What am I missing in this coaxial pintle injector

3 Upvotes

r/rocketry • • 3d ago

Question CO2 rocket nozzle expansion ratio

8 Upvotes

I was doing a bit of napkin math for the design of a CO2 capsule rocket nozzle and wanted to check my work in case I made any serious errors in my assumptions:

To bypass the more complex thermodynamics of figuring out the 1-bar density of recently-expanded gaseous CO2 accounting for enthalpy I read through some workplace safety documents for bottled CO2(l) which seemed to indicate a worst-case temperature of ~78C, right at the sublimation point. I'm assuming the gas won't get much of a chance to absorb heat from anywhere until it's out of the nozzle so I'm going with that. The lowest-temperature density figure I could find for CO2(g) was ~2.4kg/m3 at -50C, glimpsing at the chart I would approximate the highest density to be around 2.6.

CO2(l) at +15C sits around 820 kg/m3 , for an expansion ratio of around 820/2.6 = 320. Presumably in the form of a 3D printed de Laval with a 1mm dia. throat and 20mm outer edge.

Does that seem about right?


r/rocketry • • 4d ago

Question I'm 16 and want to learn rocketry

17 Upvotes

So, I have been fascinated about space, rockets and robots since childhood. And now I want to build a reusable rocket jist like spacex (obusly not big like starship and not that advanced) but I want to build a small - medium size rocket which can even land on itself. But I am confused about where I should start and what to learn. Also I am just 16 (turning 17 next month) so I don't know high end rocket science.

I know some of the basic things like python, c++, 3d designing (CAD), PCB designing, work with electronics (esp32, Arduino, and a couple of sensors), basics of AI/ML (started learning to build tiny ml models), basic algebra (little more than school) and yeah only this much.

Btw, currently planning to build a flight controller.

I know this is not enough but I want to learn more stuff and build the rocket.

So, any recommendations for resources, advice, course or anything. Even your little advice will help me.

Thanks for reading.


r/rocketry • • 4d ago

Showcase Exclusive Access Into USC’s Rocket Lab

Thumbnail
youtube.com
29 Upvotes

The USC Rocket Propulsion Lab is the only university rocket team that has made it to space multiple times. Everything at the lab is student-produced, including the designing, building and launching of the rockets.

Check out the five coolest things inside of the lab, from the rocket wall of past launches to the payloads carried into space, including in collaboration with NASA.


r/rocketry • • 4d ago

New kerosene gel fuel could improve propulsion control in rockets and satellites

Thumbnail
thebrighterside.news
26 Upvotes

A rocket engine needs fuel to move on command. Inside the tank, that same freedom to move can become a problem. Fuel can surge from one side to the other as a vehicle accelerates or turns, pushing against the tank walls and complicating the work of keeping the spacecraft on course.

Researchers Pranay Mudaliar and Jerin John at Concordia University are exploring a way to give kerosene two useful behaviors. Their transparent gel holds together like a soft solid while sitting still. When layers of the material slide past one another faster, it becomes much easier to move. The team reported its findings in Langmuir.

A half-full water bottle makes the problem easy to see. Move the bottle sharply, then stop, and the water keeps moving for a moment. As it hits the walls and rolls back, it pushes on the bottle. In a spacecraft, where propellant can account for a large share of the vehicle’s mass, similar motion can affect the flight path.