r/s10 • u/onefast536 • 3h ago
Wheels and Tires New wheels!
Next is lowering kit. Also these are gen 3 Pontiac firebird wheels.
r/s10 • u/Drago-0900 • Jan 11 '26
I have added an exemption so that if you are either an approved user OR have posted in the past successfully your post will go through. This will reduce the amount of posts from actual humans or prior contributors getting filtered to the que. For newcomers only the requirements will be 100 karma and 1 year of account age.
I also added protection against users without any community karma that attempt to post links or use generic sales language. But this should drastically reduce the chance of a bot getting in while keeping users able to post freely.
r/s10 • u/Drago-0900 • Dec 19 '25
Starting today any account with under 100 combined karma and OR is less than 30 days old will immediately have it's posts and comments removed by the new automoderator configuration. This is in effort to combat brazen bot account activity. I have had to deal with around 5-6 of them in the past week reuploading old posts and stealing upvotes from that. One was today. If you are a real person below the requirements contact the mods for approval. This has been an announcement, have a good day.
r/s10 • u/onefast536 • 3h ago
Next is lowering kit. Also these are gen 3 Pontiac firebird wheels.
r/s10 • u/Technical_Plenty_774 • 12h ago
I wanna replace the 4.3 and the 4l60e (when it blows up/if) with a 350 small block and manual 5 speed
r/s10 • u/minitruckruck • 1d ago
Here's my 2002 S10 2.2 Auto.
sitting at 102k currently
r/s10 • u/cousin_idiot • 18h ago
Shot this pic earlier
r/s10 • u/Capable-Group6821 • 1d ago
Kept breaking the bottom part of the rail guide thing
After some trial and error I finally got her sitting just right.
r/s10 • u/No_Secretary_709 • 1d ago
I have a 2001 chevy s10. I had no brake lights, and no lights on the driver side. I replaced all 4 bulbs. 3157.
Upon changing, I took out the 3rd/smallest light fixture? The bulb looked burnt/mirror coating to me.
What is this bulb. Pics should be included
r/s10 • u/elbow667 • 1d ago
My 99 s10 with 2.2 shifts into 3rd at highway speeds, rpms go up by about 1k, if I'm accelerating I'm fine, if I'm going up an incline I'm fine, even a very slight incline I'm fine. Once the road flattens out, 3rd. we changed the fluid and filter twice, didn't notice any bits and pieces, not a lot of shavings or anything. The truck cost us very little and its fine in the city. what's the most likely cause and is there an economical way to troubleshoot this without pulling the engine? My son loves this truck and wants to keep it running. thanks.
r/s10 • u/sillysawa • 1d ago
got an 01 blazer (4.3) I'm pulling all the front body panels off to do a quick and dirty repaint because nothing looks worse than the spray paint that's already on there (not my doing, don't worry...) and was wondering what the hard-to-access stuff on these is, what stuff I should replace for peace of mind while I'm in there. It's high mileage (242k) but has been maintained very well and I'd like to keep it that way.
r/s10 • u/Super-Figure966 • 2d ago
Anyone know where this hose goes to?
r/s10 • u/Intelligent_Art_343 • 2d ago
I have a 2000 s10 zr2 i had got me replacment fender flares for my passenger side since mine are missing and i had to break the inner plastic tabs that hold the rivet/studs with nuts on them and on my rear side the inner lip is bent and im sure its too brittle to bend back and Google recommend polyurethane windo weld to permantley attach them Would this Work? Like actually Because i dont care to do it as im never removing them again.
r/s10 • u/Sweatydiaper42 • 2d ago
New plugs, wires,ignition coil, distributor and fuel pump with hanger. Running great, been sitting for close to a decade. Good to hear it idle again. 94’
r/s10 • u/Sad-Sentence-6555 • 3d ago
Just finished installing cavalier seats in my 98 S10 that previously had a 60/40 split bench seat. It only had a little bit of fabrication needed. The 60/40 rails had studs but the cavalier had bolts from it's previous rails. Snapped the studs off the 60/40 seat rails and drilled a new hole for the front to line up the cav bolts. Worked great and all functions of the seats work like folding forward and leaning back. They are so comfy and I recommend the swap if you're curious about it. I'll be taking them back out after to clean the carpet and interior but I got too excited and decided to install them to test fit them.
Edit: I have to take the seats back out this weekend I know it's a mess lol.
r/s10 • u/ObviousWriting7219 • 3d ago
I have a 2.2 flex fuel s10 that looks like someone put a non flex fuel head on it at some point. It has a leak at the exhaust manifold. we tried replacing the gasket with a flex fuel gasket. Still had the leak. So we bought a flex fuel manifold. Still leaking. Pretty sure I cant use a non flex fuel manifold due to the egr not being compatible. Is that correct?? If so anyone got an idea how to fix it? Only option I see is try to find a flex fuel head but open to other suggestions if anyone has any ideas.. thanks in advance!
r/s10 • u/watermelon029 • 3d ago
So i have a number of questions in regards to this, first of all what is the general consensus on the rc 2.5? ive heard it tends to break shit so im a bit torn on whether to do that or go for a body lift (and if so any recommendations would be much appreciated) and just put it on bigger tires. second of all, how necessary do you all think it would be to regear the truck if i put it on 31s?
r/s10 • u/Mistell4130 • 3d ago
water pump pulley just spins when I try and take it off. it's on a 2002 2.2L. I tried it with the drive belt still tensioned but it still just spins.
r/s10 • u/clockFox48 • 3d ago
1995 Chevy S10 2.2L L4 with a 5-Speed Manual. T5 transmission, I believe. I bought it last Thursday, and it runs great (aside from 80+ oil pressure at idle which doesn't seem normal) and I noticed that the turn signals didn't work, so after some digging I found that the fuse was missing. I put a new fuse in and they worked fine. But then I put it in reverse and the fuse blew immediately. Replaced it, same thing, since the turn signals and reverse/back-up lights are on the same fuse. After some research, I've found that it's supposedly the reverse light switch on the transmission. I just wanna see if anyone has any advice or any other ideas as to what I should try or how to confirm that it IS the switch before I commit to buying a new switch. Thank you!
r/s10 • u/gearhead238_5 • 4d ago
Drums are stuck to the axle and im wondering is there a set screw i cant find or something you have to do to disassemble the rear drum brakes.
r/s10 • u/BowReefer • 4d ago
Truck is currently getting converted from drums to disks, got feedback that the alignment is unfixable (at least liability wise) due to the suspension being all chewed up. I’m not building a race truck but would yall give me the sauce to the best improving parts you have experience with? Huge fan of rock auto.
Going for a full front end kit, shocks/struts and springs. Fighting the chevy lean. I know the steering system needs attention too.
Parts budget ≈$2500. Hoping thats realistic given the catalog.
Im a plumber not a mechanic so please feel free to ask for any info I may have left out. This isn’t my profession. Just love the truck. Only 115k on the dash shes got plenty of life left definitely worth saving
r/s10 • u/RandallJoPhotography • 5d ago
For reference, the truck is a 1995 GMC Sonoma with the 4.3 V6. The oil pressure when idling at a stop or parked is low, sometimes even lower than this. But when I'm driving it sits a little over 40. I've never had "fluctuating" oil pressure on any vehicle I've owned and was wondering if this is a sign of an issue. I haven't any other issues with the truck, it drives great.
I've heard from other posts that this can be caused by using oil that's too thin. The oil I use is 5W-30 which was recommended by someone I talked to on this sub. Should I switch up the oil or check mechanical components?
My s10 is a 97 2.2 5 speed and was wondering how far others have taken their pickup. Have been thinking about taking mine on a 300+ mile trip. What should I look into before taking it so far.