r/scooters • • Aug 27 '20

Just a little reminder: strap up your helmet! A helmet isn't a helmet if it's not strapped on.

727 Upvotes

I've noticed that quite a lot of scooter riders in my neighborhood just pop their helmets on and then don't bother to strap their helmets on. If you have a helmet like that, and don't strap it on, that makes it not actually a helmet. A helmet with no strap holding it on is just a hat. It won't protect you even slightly in the event of a crash. It'll just fall off and you'll get to enjoy your crash with a naked head.

It's not worth being cool and not strapping your helmet on. Wear your helmet properly. For your own sake.


r/scooters • • 11h ago

Matte black, gold rims, zero road grime(for now)

Post image
86 Upvotes

Ready for dry season 🌞


r/scooters • • 20h ago

I bought my first scooter for $1,500

Post image
92 Upvotes

2018 Kymco Like 150i


r/scooters • • 14h ago

Airblades + good friends + Vietnam = Good times 😀

Thumbnail
gallery
31 Upvotes

r/scooters • • 3h ago

Carb float hight and gasket questions

Thumbnail
gallery
3 Upvotes

Does my carb float hight look wrong when flat it slightly goes down in the carb. I see the line on the flost itself isn't flush with the aluminum. Is it supposed to be? I don't have a proper float hight gauge.

Also my gasket is not torn but should i replace it? It is smooshed in some areas where you see it's pinched and on the metal lip.


r/scooters • • 3h ago

It's just a 125cc, but still risky

2 Upvotes

I went helmet shopping today, aiming for a Sharp 5. When I got to the store, I started trying on different sizes and the owner asked me what kind of bike I ride. I mentioned that I only have a 125cc these days, and he chuckled at my choice of helmet.

I’m no stranger to the road, I’ve ridden bigger bikes like 600s and 1000s. I'm part of a family of bikers, so I shrugged it off. But honestly, if I were younger, that might have stung a bit.

I just want to share something with both younger riders and those who are older too: even a 50cc can be dangerous, just like a bicycle. My family and I have all faced our share of bike accidents. No matter the bike's size, most accidents were caused by cars, and the speeds were usually below 40mph. One family member developed epilepsy, another had a shoulder injury that kept them off their feet for six months. I’ve seen serious injuries happen when someone was thrown over the handlebars after hitting a car. It’s shocking how quickly things can go wrong at just 30mph.

So, invest in the best gear you can. It doesn’t matter what you ride, safety should always come first. Ride at your own pace and don’t let anyone intimidate you for making smart choices to protect yourself.


r/scooters • • 34m ago

Which one of these variators should i put on my gy6?

Thumbnail
gallery
1 Upvotes

Bought a 10" Qingqi scooter that came with a Naraku performance variator installed (bottom one in the 1st pic) plus the stock variator on the side (pics 3 & 4).

​The stock one is much wider and has a screw-on roller cover, while the backside/ramp plate on the scooter (last pic) looks stock. The Naraku rollers have flat spots, whereas the factory rollers are still good.

​How noticeable is the difference between these two variators? Worth ordering fresh rollers for the Naraku, or should I just run the stock setup or the naraku one with factory rollers?


r/scooters • • 2h ago

Looking for a top case for a Piaggio Liberty 125 that can fit two helmets

0 Upvotes

Hi everyone!

I'm looking for a top case for a Piaggio Liberty 125 that's large enough to fit two helmets.

Has anyone managed to find one that fits the scooter and can comfortably hold two helmets? I'd really appreciate any recommendations, especially if you could share some pictures of your setup as a reference.

Thanks in advance!


r/scooters • • 3h ago

Maxi Scooter or Motorcycle? (Advice from Tall Riders?)

0 Upvotes

Hey everyone. I got myself a 2013 Honda Sh125i last year, and it's absolutely saved my butt commuting to and from the office. Cut the time down from 1 hour with the bus to 20 mins on the scooter.

That being said, I am still not entirely comfortable on the thing to be honest. I learned to ride on a Suzuki TU250x some 10 years ago now, and since then the only two wheeler I've owned was an old Sachs moped. I assumed that the scooter would be just as easy, but the seating position is still very strange for me.

For context I am 194cm tall and 105kg. 91cm inseam and size 47 feet.

First of all my knees always seem to hit the handlebars. At speed where I can turn by leaning it's no problem, but parking lot maneuvers are always surprisingly tricky trying to make tight turns without locking the bars on my knees.

Secondly, the general riding position just feels a bit... Bizarre to me. It's honestly kind of embarrassing, but the center of gravity is already pretty tall and even taller with me riding, my knees are in the way, my hands are too low and my feet are too high up, it just feels generally... Surprisingly unstable. Like it wouldn't self-center if I took my hands off the bars. As a result it just feels very wobbly and top heavy.

All of this to say: I really love the practicality of the scooter, I can do all my weekly shopping with a 60L backpack, underseat storage, and my luggage box. I can get to and from places much faster. The CVT makes it pretty idiot proof when I have to get to the office at 5 in the morning sometimes. My insurance is pretty much nothing and I can park for free mostly everywhere. However I still feel a bit... Disconnected from the scooter and a little nervous riding it, in a way that I didn't feel on either my moped or Motorcycle.

I feel like I really need my knees around something to be able to maneuver it well, and I need my feet and knees lower so they're out of the way of the handlebars.

I am looking at potentially selling my sh125i and getting something a bit more substantial. I know there are a number of maxi scooters but frankly I don't know where to begin with those, or if they would even be better to ride. On the other side of things there are a bunch of taller dual sport and adventure bikes that I know I would fit comfortably on, but they lose the practicality of the scooter: tons of storage, CVT, etc.

I'm mostly just looking for advice from some taller riders, if there are any scooters that I might've missed that are better suited for someone my size, that are still reliable and relatively affordable. I would be going for something used of course, probably around 2500-4000 euros. Any help is much appreciated!


r/scooters • • 5h ago

Solid-looking tunnel bags that help break up the motorcycle's silhouette

1 Upvotes

Hi all. I currently have Honda's 2027 ADV-160 and it is an absolute delight to ride, but I have just one teeny tiny issue: the maxi scooter look is wonderful, but it's not for me. But I love this scooter too much to sell it and buy something else, so I'm wondering if there are any tunnel bags/cases that might help break up its silhouette?

Tunnel bag made for the X-ADV 750, the ADV-160's eldest brother.

Something like this is what I'm looking for. I absolutely adore the look and want to get one of my own.


r/scooters • • 5h ago

Carb fuel line question

Thumbnail
gallery
1 Upvotes

Finally going to disassemble the carb and check my jets and watched a video on youtube about it.

He said when you remove the fuel line it SHOULDN'T leak. If you pull off the fuel line and fuel comes out it may be a bad "pet cock".

Well i removed my fuel valve from the scooter at the carb end and fuel just freely flowed out. I shoved a machine screw in the end and wrapped a nitrile glove around that thinking the nitrile won't be dissolved by the gas.

Was that correct advice? If fuel free flows when you remove it from the carb is it a bad pet cock. (Thats what it sounded like he called it. I never heard of that part before)

Btw my scooter won't stay running so hench why i finally am going at it. Around my carb i noticed damp residue with dirt stuck to it. Some under the over flow hose but most on the opposite side.

I guess in for a penny in for a pound and I am going to try and fully remove it now. Maybe i need new carb gaskets also since it's damp.

Taiwan built scooter btw with the black automatic choke on it. Here are some pics of it on the scooter.


r/scooters • • 6h ago

Question about throttle wire carburator connection

Thumbnail
gallery
1 Upvotes

Bought a new carburator that fits everything other than the throttle wire. The metal is too big to go into the slot.

Im wondering where i can research sizings for this specifically. When i was researching carburator sizes to buy the correct one i never saw any site or video mention anything related to the throttle wire, so i thought it would fit. I have tried searching for it but im getting everything but what im looking for, and i don’t know how to narrow down the search prompt to this specific problem.

I am just learning to fix scooters so advice is appreciated. Sorry for the blurry photos.


r/scooters • • 22h ago

Mejoras - Updates T Max 530 2015

Post image
18 Upvotes

Qué comentarios o sugerencias tienen sobre poner este tipo de protectores de correa personalizados a sus T Max??


r/scooters • • 7h ago

Brand new Sym Fiddle II 2026 making weird noise

1 Upvotes

Hi there, I've bought a brand new scooter for my birthday straight from the dealership and there is this noise that doesn't go away. Leave it to idle and it stays there even when warmed up the noise is still present. I've stopped riding it to avoid causing any sort of further damage. Fuel is full, oils are full. No idea what this noise is, could someone help diagnose?


r/scooters • • 7h ago

Traction control issue on SH150i 2024

1 Upvotes

I recently changed the rear pads and I had to remove the break caliper from its position. I thought I hadn't touch any other cable but apparently now the traction control has become more sensitive and after it activates it needs me to slow down to about 30km/h to stop working even if the wheel isn't spinning. I can't see any visible difference in the traction control cable so what could be the issue?


r/scooters • • 14h ago

Piaggio Zip 2T DR 70cc – Poor throttle response and heavy bogging

Post image
2 Upvotes

Hey everyone,

I've been struggling to get my Zip running properly since installing the DR 70cc cylinder.

My setup:

  • DR 70cc cast iron cylinder
  • Yasuni R exhaust
  • Dell'Orto 17.5mm carburetor
  • Open air filter
  • Main jet 80
  • Malossi 5.1g rollers
  • Malossi X-Belt
  • Polini Evo Slider 32kg contra spring
  • Yellow Malossi clutch springs
  • Unrestricted CDI
  • NGK BR9EIX spark plug

The problem:

The Zip bogs down badly and has very delayed throttle response, especially when taking off. It makes a deep, heavy sound at low RPM and feels like it's flooding.

Sometimes it runs almost as well at 1/8 throttle as it does at full throttle. It also seems to keep pulling slightly for a moment after I release the throttle.

What I've tried so far:

I started with larger main jets (80–98), but the bigger I went, the worse it ran. Even with an 80 jet, it still runs poorly. I honestly thought I wouldn't need anything smaller than an 80 with this setup.

Lowering the needle by one notch made a noticeable improvement.

Turning the air screw 1/4 turn out improved the initial throttle response quite a bit, but then it started sputtering and bogging heavily around 30 km/h and wouldn't accelerate any further.

Turning the air screw 1/4 turn in made the throttle response much worse again, throughout the entire rev range.

I've checked the choke, float bowl and jets. Everything seems clean and in working order.

My question:

Does anyone have an idea where I should start from here? Should I try a smaller main jet, keep adjusting the needle and air screw, or could the problem be somewhere else entirely?

I'd rather not keep randomly changing things without understanding what I'm doing.

I've included some pictures and videos so you can see and hear what's happening.

https://youtube.com/shorts/Rfy8DHnbEMg

https://youtube.com/shorts/_kdPcpapHfs

https://youtube.com/shorts/AAjIqKzfMj4

Any advice would be appreciated. Thanks!


r/scooters • • 1d ago

Maxi Scooter vs. Standard Scooter. Which do you prefer and why?

Post image
121 Upvotes

r/scooters • • 13h ago

Regarding the purchase of new activa 125 in my family

1 Upvotes

We bought a new activa 125 2026 model on dhanteras and we took it home. I know without plates is not safe and legal to take it home but we thought that we will just do the pooja on the day and on diwali and return it to the dealership until the plates arrive.

But its been 2 weeks after purchase he is delaying it first he said series hasn't opened then now he is saying that you will receive call from honda and then your rto registration will start.

But i need this vehicle as i have to attend my clg again from 25th.

Is the dealer delaying it or is this the procedure??

I have no idea and i am just fed up the scooty is parked in the parking but still its unusable.

Edit: i asked him for temporary registration but he declined me


r/scooters • • 1d ago

My practical all around scoot with 180cc engine, tcs, abs.

Thumbnail
gallery
33 Upvotes

r/scooters • • 23h ago

Looking for a 125 but haven’t got a clue what I’m looking for any help?

3 Upvotes

Is there anything I should look out for or look to avoid also?


r/scooters • • 1d ago

Took my first ride on my new scooter tonight!

150 Upvotes

Just did my very first ride on my new Honda PCX 125. I'm a total beginner, so I was nervous at first, but once I got going I couldn't stop smiling. Any tips for a new rider?


r/scooters • • 23h ago

Regarding the purchase of new activa 125 in my family

Thumbnail reddit.com
0 Upvotes

r/scooters • • 1d ago

Need help with scratches

Thumbnail
gallery
4 Upvotes

We've recently purchased Access 125CC but few weeks back i met with a small accident and got scratches here. What can i do please help 😭🙏