r/sewhelp • • 20h ago

šŸ’›BeginneršŸ’› Machine not creating stitches

6 Upvotes

Trying to fix up this machine for my wife and I’m struggling to get it to actually… stitch. The bobbin is full and it does pick it up but not consistently? Any tips?
The machine is a futura 2 model 920 singer


r/sewhelp • • 14h ago

botched shorts 😬😬😬

Thumbnail gallery
0 Upvotes

so i have a pair of plaid shorts i really want to repair, younger me had wanted a shorter look and terrible botched them and then wanted to try and super glue it back, now the inner crotch/ thigh area is at a weird triangle style and there is excess glue. how would i go about making them look identical in shape to the jean shorts on the right


r/sewhelp • • 1h ago

ā˜•ļø non sewing šŸ«– My top thread refuses to pick up the bobbin thread and is just getting stuck...

0 Upvotes

Ill put another picture in the comments of what just happened while I was messing with it, it just doesn't seem to go all the way.


r/sewhelp • • 2h ago

šŸ’›BeginneršŸ’› What's the Best First Sewing Machine for me?

0 Upvotes

I've done pretty much a lot of research on what might be best for my case but those are all just information and none that I actually tested/witnessed irl. To experience using the actual machines in my area is a challenge!

What I consider the most is one that can make consistent and clean bar tack on heavy denim (as in the photo), especially over stacked seam allowances at the crotch. I can't do that with an industrial Juki that only does straight stitching, tho I might be able to do a bar tack by hand (?) if Juki ended up being the best choice and then eventually get a separate zigzag machine. I also consider the Singer Denim (Singer HD here is more expensive than the Denim model for a reason unknown to me), although this one is arguably not on par with any industrial machines. I also saw SingerU20 and JUKI LZ-2280A (not sure about the price point compared to the first two). I don't mind secondhand or reconditioned. Help guys, thanks!!


r/sewhelp • • 12m ago

šŸ’›BeginneršŸ’› Are these stitches too tight?

Thumbnail gallery
0 Upvotes

Making All People Quilt's pumpkin placemats design. Are these stitches too close together? I'm worried about the fabric ripping as the stitches look like they're straining the fabric.

How do I adjust the stitches so they don't look like this? I have a Necchi 3204FB, and I've been fiddling with the dials, but the stitches just still don't look right when sewing thick pieces together like this. They look fine when I'm just sewing 2 pieces of fabric together.

Also, when quilting, should I be backstitching at the end of each line? I want the design to be reversible and am using the backing fabric to bind.

(BTW, I'm very new to sewing, so any insight would be much appreciated!)


r/sewhelp • • 15h ago

possible to get rid of the hole + ties or not?

Post image
0 Upvotes

i really love these capris, + on sale, but i don’t really like the hip holes and ties…

i don’t mind if i have to take them to a tailor bc i’m pretty bad at sewing even with a machine

i just tried them on instore today and had a stretch with the fabric, if this is doable, i think i’d have to size up if sewing up the sides with a zigzag stitch is an option

thoughts and advice please!

EDIT: after general advice seems like getting rid of the holes isnt possible…

does buying a piece of fabric and making a ā€œfold overā€ feature sound more reasonable?

i’m sure some people think i’m silly for wanting these capris so desperately, just haven’t got the full story!
just looking for some help :)


r/sewhelp • • 11h ago

HELP I dont understand how to put this pattern together. If you know what to do please help

Thumbnail gallery
12 Upvotes

I’ve cut out all the pieces but I’m very confused about the leg and the body. The head also doesn’t align at all. I don’t know where to sew


r/sewhelp • • 6h ago

Using elastic to gather shirt + attaching to a bodice with an elastic panel?

1 Upvotes

Hello lovelo people!

Context: I have made a bodice that has a back panel with three channels for elastic, because I don't like zippers on my clothes. I decided to use a skirt pattern that I already had from a different pattern, without realizing that it was for a dress with a shirred back, which makes the waist way wider than I need.

Now, as I already assembled the skirt and I do not want to risk that the "regular" gathering down to my waist (aka pulling on the thread to gather the fabric) will make it difficult - if not impossible- for the skirt to get around my shoulders and my chest, can I use an elastic of the length of my waist to gather the skirt?

And if I use this method, should I put the elastic on the right or the wrong of the fabric, given that I am sewing right sides to right sides?


r/sewhelp • • 14h ago

šŸ’›BeginneršŸ’› hello, i’m a first year fashion student and was wondering if the ja001 brother is a good machine for beginners? can it also see denim?

1 Upvotes

r/sewhelp • • 15h ago

šŸ’›BeginneršŸ’› Repurposing and old tablecloth

Post image
12 Upvotes

I’m not 100% sure this is the right place to ask for this advice, but I figure it’s worth a shot. I’ve got this tablecloth I found at an antique store a while back. I desperately want to turn it into a skirt, but I’ve been putting the project off forever cause I’m scared that cutting into it is going to make it unravel. Is there a way to cut it but make sure that it won’t unravel on me? What would be a good stitch to use on it since it’s not solid fabric? Any advice would be hugely appreciated


r/sewhelp • • 23h ago

šŸ’›BeginneršŸ’› Do I need to pre wash my wool fabric?

2 Upvotes

I bought some wool suiting to make a skirt. It doesn’t smell or look dirty, but I usually always pre wash my fabric. You never know what could be on the fabric from the factory or warehouse. The plan is to hand wash it in the tub, and use the towel burrito method to dry. Should I wash it?? I will probably rarely ever wash the skirt, as it’s only a special occasion skirt (choir concerts). I just feel weird about using ā€œdirtyā€ fabric

I also know it’ll be super wrinkly after washing, and ironing it would be a huge chore, as it’s 3 yards long


r/sewhelp • • 2h ago

Bobble zigzag stitch

Thumbnail gallery
1 Upvotes

I’ve made this jogging-fabric sweater for my 5 year old. I’ve been sewing for a few months now, so not too familiar with everything.
Ive already made a spider on the front and want to make a spiderweb on the shoulder. I have the Bernina 931 and I’m using a narrowed zig zag stitch, with a jersey needle and a 030 presser foot. Ive also turned the tension lower to about 3.


r/sewhelp • • 14h ago

šŸ’›BeginneršŸ’› Correct Extra Spool Pin Compatible with Brother Fs60x (Australia)

2 Upvotes

Hi all, I've recently upgraded from mechanical and purchased my first computerised machine. I'm about to do some projects that require twin needle and want to purchase extra spool pin compatible with Brother Fs60x (Australia), but can't seem to find a definitive answer for which one would work. The Brother manual, guide and website don't mention a particular serial number needed for the extra spool pin on the Fs60x (though they do for twin needles) and when looking at spool pins on amazon and the like, many of the options don't list the Brother Fs60x on the list of compatible machines. From a quick google search the XG3488001 spool pin comes up but when clicking on a few different website's product descriptions, I see other model brother sewing machines listed as compatible, but not the Fs60x. Any advice would be appreciated (otherwise will have to pull my old singer mechanical machine out that had two built in top thread spool and I don't want to do that šŸ˜…)


r/sewhelp • • 14h ago

This is wool, right? Purchased at a huge fabric warehouse with no tag.

Thumbnail gallery
4 Upvotes

I purchased this fabric at a massive fabric warehouse in south Atlanta (shout out to Fine Fabrics). The place was mostly organized, and I found this in the Wool section, but there were still random satins or rayons laying around here and there.

I did the burn test and it smelled like hair, and the edges look like fur so I’m leaning towards wool. I just washed it on cold and I want to dry it but I’m afraid I’m going to ruin it.


r/sewhelp • • 15h ago

✨Intermediate✨ Please Help me Suprise my Girlfriend

Post image
2 Upvotes

As mentioned in the original post, I'm making a surprise dress for my girlfriend and she's got an insulin pump for her T1D. I want to make the pockets with some sort of gap for her to pass her tubing through so she can access and manage her pump from the pocket. I'm confident in how I would execute each idea but I can't settle on one design. Does anyone have any further suggestions or recommendations? I asked in the T1D sub to get a diabetic perspective and now I'm here to get a sewing perspective.

Thank you in advance šŸ™


r/sewhelp • • 15h ago

šŸ’›BeginneršŸ’› Question about projects

2 Upvotes

If you didn't, oops and accidentally bought too much knit fabric than what was needed for a project and you don't do well with having fabric sit in the house cuz you made it your 2026 resolution not to have it sit in the house and actually use it. What would you craft with it?? I have two separate knit fabrics that I bought way too much of and I'm trying to use it and I need a list of things to use it for. I don't make clothes for myself from scratch. I usually upcycle so nothing like people clothes but I have a dog. I have a Build-A-Bear old and new. I have an American girl. I have a reborn doll


r/sewhelp • • 18h ago

Bias tape for Silversaga Chloe dress

2 Upvotes

I bought + printed the pattern for Silversaga designs Chloe dress back in May but somehow lost the pattern pieces for the bias facings. I figured I could make my own bias tape rather than using the pieces but I’m not sure how big to cut the strips. I’ve read the pattern instructions and can’t be sure, but it’s possible I’m being foolish.

Am I correct in thinking 3cm wide? The YouTube tutorial video seems to show the bias facing being folded in thirds and the first fold is 1cm. Can anyone who owns this pattern/made this dress tell me if I’m on the right track? Thanks!


r/sewhelp • • 23h ago

šŸ’›BeginneršŸ’› I’m worried if everything is right with my machine.

4 Upvotes

Hi everyone, I just got my first machine, it’s a singer 660L. Overall sewing is fun. It’s really frustrating though to find out that the process of trial&error includes error, haha. Sewing is harder than it looks I got to admit. I learned some stuff and got better in a day but other things make me worry that something might be wrong with the machine. The machine is second hand from the first owner who had it for a year.

Sometimes when I’m sewing I hear a knock sound but the machine continues working fine. Other times the thread gets bunched up underneath. I had my upper thread break a few times and 2 of those were like 30 seconds of sewing apart. I tried the machine without fabric and it moves perfectly. When it turns on I hear a buzz or brr sound that worried me at first but I found out on Reddit that it’s normal for electrical machines because they calibrate their motors that way. But now I hear a similar sound during my first stitch, after that it does not appear. When I got it I took the rotary hook out by mistake while trying to take the bobbin out. It had scratches that you can see on the photos and one video. Those were there before I tried the machine but I’m not sure if some of the scratches now aren’t from me using it. Should I do anything about them?

Photos and videos in comments.