r/sffpc • • 1h ago

Assembly Help I need help cooling my new 5800X3D in a Louqe Ghost!

Post image
9 Upvotes

Build list here: https://pcpartpicker.com/list/4M8m7w

Recently upgraded to a Ryzen 5 5800X3D and damn does it run hot. Idles around 45-50, and doing literally anything makes the fans spike up the curve which is ridiculously loud. Gaming loads like cyberpunk 2077 has the temps around 85-92 which is not ideal. I currently have a 120mm slim noctua fan as intake on the bottom, and the CPU fan is exhausting thru the cooler using the Noctua 92mm that came w the cooler - unfortunately the 120mm fan mod couldn’t fit between the ram and the heat sink on the mobo.

I think the limit is the CPU cooler. Are there any low profile coolers that have a fan slightly smaller than 120mm? I saw thermalright has some good options but idk what i need. alternatively, are there any good SFF cases similar in size that would let me install larger cooling?


r/sffpc • • 1h ago

Build/Parts Check Aircooled 5950x in under 80mm ?

1 Upvotes

Im looking to get my system into an SFF-Case or at least close to it and am struggling to find an air cooled option for my 5950x to fit in something like the Fractal Terra or the Jonsbo T9.

If there isnt one, id be open to AIO watercooling it, but going full custom loop isnt in the cards just now.

Would appreciate any and all tips you have for my and my endeavour.

PS: Moving with my Gigabyte Aorus B550I PRO AX, if anyone has tried a low profile cooler with that


r/sffpc • • 1h ago

Prototype/Concept/Custom ELVN

1 Upvotes

r/sffpc • • 2h ago

Custom Mod 5L ammo can

Thumbnail gallery
17 Upvotes

r/sffpc • • 4h ago

Build/Battlestation Pics Progress

Thumbnail
gallery
83 Upvotes

I had a lot of fun building in the T1 2.5. The riser was the most I struggled with. Ironically, it’s quieter than the mid tower because of fewer fans?

Picked up a 5070ti along the way and overclocked it. Got a great bin on the core but horrible VRAM. Wont go past +400MHz without ECC kicking in.

Also been cleaning out the setup over a few weeks. Very happy with the look.


r/sffpc • • 14h ago

Build/Battlestation Pics Z20 with 9950x3d and 5080 Suprim

Thumbnail
gallery
37 Upvotes

I bought this white Z20 case and the cooler back in March 2024 and completely forgot about them. I finally got around to starting the build!

Specs & Notes:

  • CPU: 9950X3D (used)
  • Motherboard: B850M Eagle (Amazon Resale)
  • GPU: 5080 Suprim OC (used). Too big for the included anti-sag bracket to fit in this case, so I'm supporting it with a piece of foam in the end.
  • Cooler: Coolleo cooler (bought with the case). Even though I never opened it, the nickel-plated copper base already had some corrosion after sitting for 2.5 years. How time flies, lol.
  • PSU: Lian Li SP1000P (used). Not a fan of this one—the fan is way too loud. The Corsair SF1000 is much better.
  • Fans: Reusing two P28 fans from my previous build as exhaust, though I might need to add another rear fan for extra airflow.

The colors don't really match since I originally planned an all-white build, but I ended up buying a bunch of black parts instead, lol.


r/sffpc • • 14h ago

Prototype/Concept/Custom I designed an 11.9 L 3D printed case around a 200 mm fan. Feedback wanted before I finish it

214 Upvotes

This is The KUBE, a case I designed myself. The goal was the smallest case I could build around a single 200 mm fan.

Specs:

- 11.9 litres

- Mini-ITX mainboard on a slide-in tray

- Flex ATX power supply

- Graphics cards up to 2 slots and 205 mm

- One 200 mm fan (Noctua NF-A20) behind a honeycomb front

- Fully 3D printed

The first parts are printing right now. The video shows how it goes together.

The weak spot I know about is fresh air for the graphics card. Side vents would be possible, but I prefer the clean look. Would you add vents, or keep it clean? Anything else you would change?

A full build video will follow once the prototype is done.


r/sffpc • • 17h ago

Build/Battlestation Pics Msi Trident X i7 9700k >> 270k Plus

Thumbnail
gallery
35 Upvotes

Hi everyone,

A few years ago, I bought a used MSI Trident X without a GPU from Marketplace. I hadn’t even heard of it before, but I quickly fell in love with the case. It’s around 10 litres, roughly the size of a PS5, and easy to carry around. Airflow and temperatures have been excellent too, with my old setup staying below 65°C.

I wanted to share this because there aren’t many detailed posts about upgrading an MSI Trident X or doing a custom build inside the Trident/MEG chassis. Hopefully, this helps someone else who wants to keep the case and upgrade the hardware.

For reference, I was seeing new models listed for around €2,000, with prices now closer to €2,500:

https://www.notebooksbilliger.de/produkte/msi+trident

**My Old Setup**

- MSI Z370I Gaming Pro Carbon AC

- Intel Core i7-9700K

- 32 GB DDR4

- Gigabyte RTX 4060 with two fans and a two-slot cooler

- 256 GB M.2 SSD

- 512 GB SATA SSD

- 1 TB WD hard drive

Honestly, this system still holds up well in 2026. I just wanted something newer before component prices climbed any further. I’ve bought another case from Amazon, so the old parts will go into that.

After plenty of research, I decided to rebuild inside the Trident case. The motherboard was a big part of the decision because it packs a lot of features into such a small board.

**The New Build**

- Intel Core Ultra 270K Plus: €280

- Thermalright AXP120-X67 cooler

- ASRock Z890I Nova WiFi, LGA1851: €260

- 16 GB DDR5-5200 CL40: €180, with another 16 GB planned

- ASUS TUF RTX 5060 with three fans and a three-slot cooler: €430

- Crucial 2 TB PCIe Gen4 NVMe SSD: included in another deal

I also have two M.2 slots and two SATA connections available for future storage upgrades.

The photos show a temporary LGA1700 cooler from a 14th-generation i7 setup because the Thermalright hadn’t arrived yet. It also gives me a useful starting point for comparing temperatures once the new cooler is installed.

**Installation And Issues**

I kept the original MSI PCIe 3.0 riser, partly to retain the original RGB setup, which I still use occasionally. Access around the front of the case is also very limited, so replacing that assembly isn’t straightforward.

The older riser is a compromise I’m happy with for now. Any performance difference will depend on the GPU and workload, but keeping the original arrangement made the rebuild easier.

The actual hardware swap was fairly straightforward. You need to remove the old components carefully to get proper access to the motherboard, but it’s manageable if you take your time. I won’t turn this into a full teardown guide, but feel free to ask if you need help with a particular step.

The first issue came during boot. The motherboard would hang at the splash screen showing the BIOS and boot-menu shortcuts. Updating to the latest BIOS resolved it. BIOS Flashback made this fairly simple: I followed the instructions in the motherboard manual and used the Flashback button.

Windows 11 setup was more troublesome. I experienced heavy stuttering and crashes until I got all the necessary drivers installed, particularly the Intel chipset and Management Engine drivers. During troubleshooting, I also had to temporarily disable the dedicated GPU and use the integrated graphics to finish installing everything.

One thing I really liked was ASRock’s automatic driver installer. You enable it in the BIOS, and once Windows boots, it asks whether you want to install the drivers. A simple utility then lets you choose what you need.

After restarting, the BIOS option disabled itself again. In my experience, it was a much cleaner process than dealing with the extra software some motherboard vendors push. I’d love to see this approach become standard.

Overall, I’m happy I kept the Trident case. Its size, portability and cooling are what made me like it in the first place, and now I get to keep those benefits with a newer platform.

With another 16 GB of RAM and possibly an RTX 5070 Ti later, I’m hoping to get another six years or more out of this build, depending on how my needs change.

If you’ve upgraded a Trident X or built something similar inside this chassis, I’d be interested to hear how yours turned out.


r/sffpc • • 18h ago

Custom Mod A quick and cheap flex-atx PSU fan mod

Thumbnail
gallery
11 Upvotes

Hi! As you probably are aware, most flex-atx PSUs come with awfully noisy 40mm fans. The only 40mm fan that can be (somewhat) quiet is Noctua A4. But a noctua costs about twice as much as I paid for this PSU and a case and even then it's not guaranteed to have comfortable noise levels.

Good thing flex-atx PSUs are 81.5mm wide. This is the perfect width to fit an 80mm fan. So I disassembled my PSU, took an ID-Cooling 8010PWM fan and simply zip tied it on. Then I made a simple casing out of a plastic sheet. Needless to say it is whisper quiet and ice cold now.

(Disclaimer: please don't take apart PSUs unless you know what you're doing and absolutely need to do it. High voltage hurts bad.)


r/sffpc • • 20h ago

Others/Miscellaneous SF750 power cord melted

Thumbnail
gallery
179 Upvotes

Was playing a game when suddenly my pc makes a strange sound and restarts. Unplugged it and saw this. Also, over the past few months it has occasionally randomly restarted. Any suggestions for a replacement before the Black Friday sales end?


r/sffpc • • 21h ago

Assembly Help Case help

3 Upvotes

Hi I'm looking for a case

Location

Eu / Fra

Parts

GPU: 9070xt

CPU: 7800x3d or 9800x3d

Mobo: any that comes with 2 USB type c ports and wifi at least 6E ( small preference for MSI )

Ram: at least 2x24gb

Storage: 1 SSD nvme gen 5 of 1 tb, 1 SSD nvme gen 4 of 2 tb

PSU: any plat or titanium rated one

CPU Cooler: either Air or custom water cooling with easy draining (if custom water cooling GPU will be as well)

Case: any with an handle preferred without glass and black ,purple , blue or dark blue but no light blue

Use case

Design, 3d , Aero simulation , stress simulation and gaming and a shit ton of traveling with it .

Thx for any help


r/sffpc • • 21h ago

Custom Mod Factory-Style Rear OCuLink Mod on the ASRock DeskMini X600

Thumbnail
gallery
43 Upvotes

Hey everyone,

I wanted to add full PCIe 4.0 x4 eGPU support to my ASRock DeskMini X600 USB4 while keeping the chassis clean.

I routed an M.2 NVMe-to-OCuLink (SFF-8612) adapter from the rear M.2 slot of the motherboard and integrated the port directly into the rear chassis underneath the I/O shield.

🔧 How it was done:

Using the Rear Vent Slots: Directly beneath the motherboard I/O shield, the DeskMini X600 chassis already has a neat row of stamped rectangular ventilation slots. I snipped out the thin metal dividers between the middle slots and hand-filed the edges smooth to create the opening for the OCuLink port.

NVMe M Key zu OCuLink Adapter:

JMT M.2 NVMe M Key zu OCuLink 4i / SFF8611 Verlängerungskabel PCIe4.0 X4 Gen3 4 Kompatibel mit T10 / SAS-4 SFF-8612 (20 cm)

www.amazon.de/dp/B0DDXTKB2T

eGPU Dock:

EXP GDC OCuLink High-Speed GPU Dock (PCIe 4.0 x4)

https://de.aliexpress.com/item/1005006346664820.html?spm=a2g0o.order_list.order_list_main.5.100d5c5ft6Vfdl&gatewayAdapt=glo2deu


r/sffpc • • 22h ago

Others/Miscellaneous Side by side comparison of the new low profile cpu cooler Thermalright AXP120-X77 with the good old AXP120-X67. The fin density on the 77mm cooler is insane

Thumbnail
gallery
484 Upvotes

r/sffpc • • 1d ago

Others/Miscellaneous Meanwell LOP 300 FLEX ATX case - now with cool and silent 80mm fan!

Thumbnail
gallery
208 Upvotes

Suddenly discovered out about thin 80x10mm fans, and i feel the urge to make my version on lop to flex atx conversion with that. Only 111mm in length!

Bought a cheap id cooling one (NO-8010-PWM) and made new version of my case. And this thing works great!

However, thermals worried me, so i did tests with 300W load for multiple hours and got 65c on hottest point (the transformer) with fan at 100% (but it still silent).

Then came tortue test - 360W at poor little 300w psu, and it handled it very well. Zero issues and up to 75c at hottest points.

Now this is my go-to solution with DEBROGLIE 600W pico psu. Cheap, dead silent, cool, and minimum wires.


r/sffpc • • 1d ago

Others/Miscellaneous What to do if you have to move a lot with your desktop

2 Upvotes

I'm really considering designing an internal support bracket because I do travel a lot by car but I'm worried if let's say I randomly stop or I'm going with a new brand they randomly stop my shit breaks can I design like an internal bracket or something? What do I do?


r/sffpc • • 1d ago

Assembly Help Case suggestions?

0 Upvotes

I want to get a SFF pc case and I want suggestions


r/sffpc • • 1d ago

Assembly Help What's the best budget 20 to 22 liter case

0 Upvotes

I know anything above 20 litres isn't considered small form factor, but still considering where I live, I am a little more limited than most and what would you guys recommend?


r/sffpc • • 1d ago

Build/Battlestation Pics Metalfish T60

Thumbnail
gallery
62 Upvotes

R7 3700x, 32GB RAM, GTX 1080, 1TB ssd

Case: Metalfish T60

Cooler: uenorth m120+arctic p12 slim


r/sffpc • • 1d ago

Assembly Help What money/performance aio should i buy for 9800x3d in Formd t1 2.1??

2 Upvotes

In my region i can’t find atmos 240. What are the alternatives? I look at Thermalright Frozen Notte
but i’m not sure that it fits because of pump on the tubes. Give me some advise pls.


r/sffpc • • 1d ago

Assembly Help SFX PSU Longer Cables In Z20?

Thumbnail reddit.com
1 Upvotes

r/sffpc • • 1d ago

Build/Battlestation Pics How quiet do you want your pc to be?

Thumbnail
gallery
392 Upvotes

YES.

- Detailed Specifications -

Chassis - Yuel Beast Motif Monument 2.0 Black

CPU - AMD RYZEN 5 9600X (65W)

Cooler - Noctua NH-P1 'Cerakote.black'

Motherboard - ASRock Phantom Gaming B650I Lightning

RAM - TeamGroup T-Create Expert DDR5-7200 CL34 24GB *2 @6000 CL30

GPU - Palit GeForce RTX 3050 KalmX 6GB 'Black Edition'

Front M.2 SSD - SK Hynix Platinum P51 2TB

Rear M.2 SSD - SK Hynix Platinum P41 2TB w/ be quiet! MC1 Pro

WLAN replaced with MediaTek MT7927

PSU - SilverStone NightJar NJ-450SXL

This is truly fanless and silent system.

No noise, just quietness.

I will add 2 SK Hynix Gold S31 1TB SATA SSDs when I get home... They are still in the box.


r/sffpc • • 1d ago

Build/Battlestation Pics Humbly submitting my first SFF build

Thumbnail
gallery
50 Upvotes

Long-time lurker, first time poster on this sub! I humbly submit my very first PC build which happened to be SFF. I bought a PC secondhand and upgraded the main parts, which basically involved rebuilding it. Third photo was how it was originally.

Case: Cooler Master NR200
Mobo: ASRock B850i
CPU: 7800x3d
GPU: Lenovo 4070 Ti Super (Huge fan of OEM GPUs, I was looking for a Dell OEM but happy with this one)
Cooler: Noctua D12L
PSU: Cooler Master SFX 850W


r/sffpc • • 1d ago

Build/Parts Check Stupid Idea: Lenovo Tiny PC i7-7700K?

1 Upvotes

I've been looking at Lenovo M720Q or similar tiny PCs for both steam machine and Jellyfin Media server use cases.

I happen to have a i7-7700k lying about. It's the correct socket. Will it work and I can just lower to 65W in bios?

Otherwise I can just use the 9400T and maybe upgrade to 9500T if I can find a good price if this is the best option for that system.


r/sffpc • • 1d ago

Build/Parts Check Anyone order from Custom-mod recently?

6 Upvotes

Hello anyone order from Custom-mod recently? I ordered a case at the beginning of June and it said it'd take 7 weeks to ship and its been about 20 weeks now. Anyone have this experience with recent orders?