r/snowmobiling • u/Prior-Message-1913 • 21h ago
Gift Ideas for Snowmobilers?
Hi All,
My daughter's boyfriend snowmobiles. I am looking for gift ideas for him. Do you all have any suggestions? Thanks.
r/snowmobiling • u/Prior-Message-1913 • 21h ago
Hi All,
My daughter's boyfriend snowmobiles. I am looking for gift ideas for him. Do you all have any suggestions? Thanks.
r/snowmobiling • u/returntonone • 1d ago
r/snowmobiling • u/marleebeeb • 2d ago
Hey yāall, Iāve been looking around and havenāt found much info online so I figured asking some subreddits directly might be better.
Iāve been looking for a site that sells accurate vector templates for snowmobiles. Iāve had issues with the accuracy of Victory Templates and Accurate Templates in the past, so Iām hoping to avoid them.
Thanks in advance!!
r/snowmobiling • u/Tainterd_brown • 2d ago
This is a 1993 Polaris XLT the previous owner, put some sort of cheap plastic that wears through after five or six poles I need something thatās gonna work better
r/snowmobiling • u/Royal_Roar_1776 • 3d ago
Going to the Tahoe area this Christmas and looking for some spots to take the kids and in-laws on a few good trail rides and maybe a few open meadows so I can teach my oldest how to ride off trail. Iāll be bringing my own sleds from Washington. Hoping someone can give me a little info, Iāve been looking online but I wanted some advice from a local!
r/snowmobiling • u/renns99 • 3d ago
We picked up a 1996 Polaris Indy Lite to use as a guest loaner sled at our cabin up north. All our other sleds are oil injection, but this one was converted by the previous owner to premix. He claimed the oil tank was leaking, so he just disconnected the cable at the pump, snipped the oil hose from tank to pump, and plugged the cut ends with bolts. The injection pump and those little lines running up to the intake remain in place.
I'd like to convert back to functioning oil injection to be consistent with the rest of our fleet. The oil tank was found to be leak-free, but the oil feed line from tank to pump was chafed through. Can I just reconnect everything, fill the reservoir, and be good to go? Hoping there's no damage to the oil pump running with the inlet capped like that. And yes, I'll run both pre-mix and oil injection until I can verify it's consuming injection oil at the proper rate. Any guidance would be appreciated.
r/snowmobiling • u/Ok-Audience2760 • 3d ago
Hello, I left my fuel on over night which I know is a no no but it was an accident. It wouldnāt start and I noticed a significant wetness under the y pipe. I removed the pipe to find quite a bit of fuel in it which there was also fuel in the crankcase . The part I find strange is I have the floats set slightly lower than spec, the carbs have brand new needle and seats which both seal, I took apart the fuel pump but couldnāt fine any holes in the diaphragm. So I guess, was this likely caused by my no no or possibly something else related? Iāve been running it a few times each weekend for a few months as I work on it and itās never had a starting issue.
This is a 94 zr580
r/snowmobiling • u/poposheishaw • 5d ago
Anybody have any thought on them? Total junk? Hot or miss? Solid?
Canāt afford the name brand 200s and my little guy isnāt big enough for the older 340s
r/snowmobiling • u/dingfry88 • 5d ago
Would I be fine to put 2ā black letters with white background here, or should they be higher up?
r/snowmobiling • u/Ok-Audience2760 • 6d ago
Before picture at the end
This is my 94 ZR580 I got from marketplace and built into a budget mountain mod. I got a trashed powder special for the donor parts; took the wide skis, shocks, handle bars, secondary clutch, 136 track/skid, and I chopped the end of the tunnel off to make an extension. The skis made the front end sit higher and the track has 2 inch lugs which required 8 tooth drivers. After all the work I decided it deserved a paint job and an Amazon pinstripe kit gave it that 90ās flair. I also 3d printed the bar hooks and the tail light cover.
Iām sure when I get it out Iāve got a ton of gearing to play with.
r/snowmobiling • u/Regular_Pride_6587 • 6d ago
I need to replace pretty much all of my riding gear since I lost 65 pounds since April and I will probably be 80 pounds down by January.
My current coat is the Polaris SwitchBack 1.0 Jacket Tech 54 with the removable liner. The coat is super warm. I've ridden in -20 with zero issues.
Since I need to buy bib's, coat base and mid layers. I need to stay on a budget. Polaris has some killer deals on the older Northstar Jackets. Only real difference between the jackets are the insulation. The Northstar jacket doesn't have a removable liner.
Northstar 1.0 (180g insulation in body and 100g in the arms)
Switchback 2.0 jacket (150g insulation in the body and 100g in the arm)
Anybody currently use the Northstar jacket and how do you like it?
r/snowmobiling • u/622114 • 6d ago
This was an expired kit. Somehow wet dry sand paper expires but these kits work really well
r/snowmobiling • u/hiphopanonymouslm • 6d ago
Is the FT2 with the cargo rack the only option for an additional seat on the 2020 axys chassis?
r/snowmobiling • u/Total-Reception2368 • 7d ago
Just picked up at 2014 Polaris pro rmk 800 163 with a fix it kit
For 3k Canadian sled has 3 hours on the top end all heat cycles done itās my second mountain sled any other suggestions on if I made a mistake or not
r/snowmobiling • u/Any-Broccoli-4369 • 7d ago
With Revy at 30 year lows for snow at tree line I am considering taking a trip to northwest BC. Seen Muskoka freerider at Stewart and have seen many people say NW BC..... IYNYN. Where would be the best place to go in northwest BC, driving from Calgary, thinking about taking off after the 20th,
r/snowmobiling • u/No-Setting2682 • 8d ago
I see the occasional vintage machines, usually Ski-Doos from the 60s and 70s on sale on FB Marketplace going from $800 to $1800.
Are they worth looking into or should I bite the bullet and buy a newer model?
It would only be for doing the occasional outings with the grandkid, a few kilometers each time.
I do most of my own mechanical repairs on snowblowers and cars so I figure an old sled might not be that hard to work on, but just wondering about parts availability...
r/snowmobiling • u/gizzard_lizzard • 7d ago
Hey all! Not sure if I should do this. Itās a 6 day snowmobiling expedition with like 6-7 hours of driving per day. Should I do it? I would really like to know anybodyās experiences. Thanks !!
r/snowmobiling • u/juiceboxcrew • 9d ago
Just picked up this 2011 MXZ Renegade 800 tonight with 1790 miles on it from the original owner. Overall itās in great shape and it was an older guy that owned so no signs of it being non stop hammered on.
He did say that he wasnāt able to get the warranty engine work done for some mileage related issue and that makes curious how often did this generation engine blow up from the āelevationā warranty engine work?
Trying to find out if Iām potentially going to get one full season out of this thing or maybe a couple before engine work.
r/snowmobiling • u/gizzard_lizzard • 9d ago
Hey all! Iām looking at doing the 6 day snowmobiling expedition with GV loisirs in February. Iāve snowmobiled before but just wanted to talk with someone that has done this before. Any experiences? I speak French feel free to respond in French. Thanks!!
r/snowmobiling • u/cloudpicture • 10d ago
My son just bought a snowmobile but the last owner never registered it and the registration is from Michigan. It is signed by the first owner. The guy he bought it from never registered it so it has the old owners signature on it. My son needs to register it in NY but we can't figure out what to do.
r/snowmobiling • u/Yeet_Bastard • 11d ago
r/snowmobiling • u/Next-President-WAJ • 11d ago
Bought my partner a sled to zip around on and all last year she complained her thumbs were exhausted at the end of the day, everyday. Reading around online it seems like a normal complaint too. The solution I found is to cut a few rings off the springs.
Is that true? How many should I start with? I assume I need to cut both sides EXACTLY the same? Is there a lighter spring I can buy instead?