r/soapmaking • u/valhallawoman • 6h ago
CP Cold Process Soap Techniques
Swirls, layers, wall pour
r/soapmaking • u/valhallawoman • 6h ago
Swirls, layers, wall pour
r/soapmaking • u/Green_Cry_3670 • 5h ago
I made some lard soap yesterday and followed exact measurements for oils and fragrance (recipe in the pictures) and temps when mixing. The only change was the addition of the coffee grounds. When I went to cut after 24hrs it’s soft, but crumbly. This is my first lard based batch, is this normal for lard? Wondering if I cut too early. Thoughts?
I’m still new but have made several batches using different butters, oils and tallow and haven’t had this. Thanks for the help!
r/soapmaking • u/EricaK1433 • 19h ago
Donkey milk and aloe vera base. Even the ornaments are soap. Had fun making but didn't turn out exactly how I wanted.
r/soapmaking • u/LakeSignal24 • 3h ago
I'm interested in using soap packaging that consists of sliding soap box, soap slide drawer box, or sleeve and slide drawer box. In general packaging terms, it is also known as a matchbox-style box or drawer box. I found this option (see link to halepath). Do you have experience, good or bad with this company? Do you have any recommendations for a good supplier for these drawer box styles? TIA!
r/soapmaking • u/Schoolboygames • 4h ago
I've been dabbling with melt and pour for a little while and have been having a lot of fun with it. I want to start trying cold process or some more involved ways of making soap. However, a) I don't have a great way to use or even give away large quantities of soap and b) I'm still experimenting with small batches and individual bars, not looking to make big batches. Because of this, I don't want to make a bar and then wait 6 weeks for the finished product and have racks of soap around the house.
How feasible is it to make my own melt and pour base as a best of both worlds? I could hypothetically get the enjoyment and satisfaction of having made it from scratch, the potential cost savings of not buying pre-made base, but also the flexibility to make a bar here and there with whatever colors and scents I want and have it ready in a day.
r/soapmaking • u/newbie_sohper • 5h ago
I don't keep track of who buys my soaps at shows, so I have no way of contacting them. I feel awful and pretty embarrassed for not knowing the potential dangers of not only using it in soap, but also likely breathing it in while handling.
I tossed the rest out, but what are the rest of you using to color your soaps red without using artificial colorants? I have red clay, but it barely goes beyond pink.
r/soapmaking • u/BF_2 • 20h ago
I make soap from waste fat, from meat roasts, and sometimes from used vegetable oil. I prefer to avoid the vegetable oil because that seems to be the origin of the dreaded orange spots. My soap is strictly functional -- I use it daily -- and not at all "decorative."
The closest I've made to "decorative" soap was one bar, "milled", to which added some ultramarine blue, mainly to counter the yellow color. I liked the result, but when I added it to the saponification I got an unsatisfactory dull green instead. I haven't followed up yet on these experiments, but suspect the blue has to be added to fully saponified fat, not to the reaction mixture.
Since the cold weather, when I make soap, is approaching, I may try again to make blue soap.
r/soapmaking • u/GreenAdhesiveness867 • 2d ago
On a whim, I borrowed a few library books about cold process soap making. What started as a fun experiment is now a serious hobby I can’t stop doing! There’s so much to learn with each and every batch. And so much room to be creative…it’s addicting!! I’m excited to give these away as Christmas gifts this year, too.
Below is the first soap I made on August 31 and my most recent three soaps made through October and November. I’m going to make a loaf with heart embeds next!
r/soapmaking • u/mama_in_the_garden • 1d ago
I've just finished making liquid soap and have noticed the enamel on my crackpot starting to come off. If I rub the area, small flakes of enamel are on my fingers
r/soapmaking • u/Ambitious-Dirt-1902 • 2d ago
I made a 25% shea butter recipe with olive, coconut, and castor oil, the fragrances are amberwood twilight from brambleberry and some eucalyptus essential oil and activated charcoal for the black, oh and some whole milk. I tried to do a mantra swirl but it didn't turn out quite the way I wanted it too, I blended for a little too long 😅 but then I opened it like a book and was really surprised! I love the way they turned out like little Rorschach tests! Especially the flower one ❤️
r/soapmaking • u/valhallawoman • 2d ago
Polka dots, wood grain, reusing old soap
r/soapmaking • u/No_Independence_7865 • 2d ago
So I plan on selling the bars of cold process soap I make. Im trying to find the paper soap bands that I see a lot of sellers use that are printable. I have a good printer and im able to create the design, I just can't find the printable bands. Any advice will be greatly appreciated
r/soapmaking • u/Particular-Shape-565 • 2d ago
I made this Santa Claus soap using three different techniques in cold process soapmaking!
For the main bar, I used 3D-printed dividers. For the nose, I used soap clay, and for the eyebrows and mustache, I used medium trace batter piped through a piping bag!
For Santa's little helper, I also used 3D-printed dividers, and soap clay for the pom-pom on his hat.
My Christmas soaps are finally coming together!
r/soapmaking • u/Ancient-Suspect-5179 • 2d ago
Hey everyone - I posted something similar yesterday but now have more of an understanding of what I am actually trying to ask.
I’ve attached a photo of the Recipe I used for this bar. I soaked with my lye water at a temperature of 73/75 degrees and my oils at a temperature of approx 100 degrees.
The micas I used were both from nurture handmade - I used 1 tsp of each colorant - i initially mixed the micas into a small amount of olive oil that was accounted for in the recipie just not initially combined into the oil/lye mixture - is there a better way I should be doing this?
After mixing I put it in a wooden box (I didn’t want to insulate it but my mold needs to be In The box to maintain its integrity (sad) so to hopefully prevent it from volcanoing I put it in the fridge overnight though I’m thinking this did something funk like preventing gel phase so now I’ve got the weird color thing happening.
Last question for yall is about the dots all throughout - I have no clue what those are and how to minimize them.
Any and all advice is appreciated.
Attached in the comments will be th slight adjustments I’ve made to my recipie and hope to use today
r/soapmaking • u/EssentialOasis • 3d ago
I have been saving up my leftover pieces for months, and I finally cut them all up and arranged them into a parchment lined pizza pan. Then I poured some gold glittered, clear soap over it to bind everything together. The Little shards are scented with various essential oils, and I created a blend of Fir Needle, Clary Sage, Lavender, Pink Grapefruit, Lemongrass and Spearmint for the clear, sparkly binder.
r/soapmaking • u/valhallawoman • 3d ago
Being part of soap challenge club opened so many beautiful techniques to me.
r/soapmaking • u/WishboneCapable3707 • 2d ago
Bonjour. Je suis nouvelle sur Reddit je me suis inscrite ici en partie pour en savoir plus sur la fabrication de savon. (Désolée je suis française mais je n'ai pas trouvé d'espace français adapté...) . Je suis très portée sur le DIY. Je travaille à mi temps donc j'ai du temps libre et on aime savoir ce qu'on consomme, donc c'est approche qui nous convient parfaitement.
On fait tout ce qui est cuisine alimentation, le bricolage et la déco et aussi quelques vêtement (j'adore la couture).
Comme le dit le titre j'aimerais donc essayer de faire mes propres savons toute seule. Éventuellement plus tard d'autres produits d'entretien comme la lessive, voire des petits cosmétiques (crème hydratante etc).
Pour l'instant ce n'est que pour moi et ma famille mais peut être que si ça marche en faire un petit artisanat ? (Je rêve un peu peut être alors n'hésitez pas à me recadrer.)
J'ai déjà pas mal étudié la chose en lisant beaucoup de blogs et d'ouvrages, en regardant des tuto et en me renseignant ici et là. J'ai étudié les indices de saponification, les profils des corps gras, le surgraissage, le séchage, les huiles essentielles et les différences entre les matières premières.
Voici une première formule que je trouve assez équilibrée (pour 1kg d'huiles) :
400 g d'huile d'olive vierge : la base et le coté doux.
250 g de beurre de karité : riche pour la peau et la fermeté.
250 g d'huile de coco : pouvoir lavant et moussant.
100 g d'huile de ricin : pour la mousse.
Pour la partie technique :
Surgraissage de 7 %.
Part de soude : 30 %.
Eau déminéralisée.
Soude caustique avec quantité recalculée selon les indices SAP réels des lots et vérifiée sur un calculateur de saponification.
Maturation envisagée 2 mois, avec suivi de la dureté et du comportement à l'usage.
Mais une formule sur le papier ne garantit probablement pas de faire un bon savon. C'est justement pour ça que je suis là ! J'aimerais profiter de vos expériences...
Qu'en est il de mes corps gras ? Je veux évidemment une matière dense, crémeuse, qui ne fonde pas trop vite sous la douche, sans tomber dans un savon trop dur ou peu moussant.
Je me suis aussi renseigné sur le matériel. Je peux trouver un mélangeur à moindres frais … Pareillement pour les moules. Je ne manque pas de surface de stockage … D'autres choses à anticiper ?
Pour l'instant je ne tiens pas à un savon parfumé ou trop sophistiqué. Mais peut être y mettre quelques gouttes d'huiles essentielles pour des propriétés. J'ai noté lavande, arbre à thé et géranium. Vous validez ?
Enfin, pour ceux qui ont franchi le cap d'une petite commercialisation, comment cela s'est passé ? Est ce jouable ou trop de process pour un produit à faible valeur ajoutée ? Quelles sont les contraintes réglementaires, les coûts etc...
Bref je suis preneuse de tout ce qu'il y a à savoir sur la fabrication maison de savon ! je suis vraiment déterminée sur ce projet (mais pas têtue non plus...). Merci à tous pour vos retours.
r/soapmaking • u/Appropriate_Let9621 • 2d ago
Edit: Can honey change color after saponification? I hoped it would, but now I'm thinking I was wrong
original:I want to make a CP soap that looks sort of like honey comb when sliced. I'm part way through this plan. I made soap, added various amounts of honey to each section. Then sealed it in baggies and kept it cool so it wouldn't gel.
My plan was to roll the soap dough into half inch ropes, lightly dust with mica and layer into my loaf mold. 6 on the bottom, then 5, then 6 etc. Then when I press them down the plan is they compress into roughly honeycomb shape.
I was expecting the honey to turn the soap to varying shades as it cures, but now I'm thinking it won't. Ugh
r/soapmaking • u/spookypenguin2704 • 3d ago
I wanted to mix the colors to be teal and dark sage green like an earthy vibe, but I was too impatient to let it cool so it all mixed into this, which I actually really like the color so I’m not too bummed. Already can’t wait to make a new batch! I’m hoping these will make good gifts!
r/soapmaking • u/Ancient-Suspect-5179 • 3d ago
I was hoping maybe I could get some feed back in my recipe. I feel like I’ve never had issues with the hardness or integrity of the bars themselves and they cure well but I often experience volcanoing or other formation of ripples oj the top during their initial cure period. Also I cover it while it cures and I always get a TON of soda ash.
Last question - how do yall get such vibrant colors in your soaps. Mine always come out pretty muted
Thanks in advance!
r/soapmaking • u/RelevantRains • 4d ago
Made a double batch of lavender soap last night and when I cut it I noticed these opaque white patches throughout all the bars and significant soda ash. Also some small cracks on top. Makes me think it overheated, but what’s with the uneven inside and those white patches?
Recipe:
64oz total poured into 2 loaf molds
24oz Shea butter
24oz coconut oil
16 oz olive oil
20.4oz water
9oz sodium hydroxide
~4oz 40/20 lavender essential oil
Purple mica
I used the heat transfer method to melt my solid oils which I’ve done many times with no issues. (Used the hot lye solution to melt solid oils). Added olive oil, mixed well then stick blended. Everything looked beautiful!
I insulated both molds in a light towel. Then covered the top with an A frame type cardboard and another light towel.
Pics of finished bars, crack, soda ash and opaque patches inside and the freshly poured batter.
r/soapmaking • u/Leading_Eggplant1547 • 3d ago
As I’ve stated in my other posts, I am quite new to making soap. All the recipes I’ve currently been messing with are more tallow (beef) and olive oil dominate, and I also add a bit of coconut oil and castor oil depending on the recipe! Im pretty confident on the cleansing feel of a soap. I’m still working on a nice lather and also good longevity!
Anyways, my husband has been ranting and raving to people that I’m making soap for fun and his barber gifted him a handmade bar of soap from Oregon where they use goat milk! I finally gave the soap a try today and MY GOSH, the creamy lather was UNREAL… I loved it so much! I’m being led to believe that that’s from the goat milk correct? I’ve haven’t used it yet considering it’s still really unfamiliar to me but I wouldn’t be opposed to trying it!
I definitely babbled a little too long but I guess I’m more so asking soapers that used goats milk frequently in soap, why is it that you choose to use it and how? I’ve never used a milk in a soap!
r/soapmaking • u/gallopingwalloper • 4d ago
Hello fellow soapmakers, I'm about to buy soapers insurance and was wondering if anyone has advice on this. Was looking at HSCG but resent the hidden fee of guild membership, so was going to go with ACT, which also includes guild membership fees but was at least upfront about this. Any thoughts? Much appreciated!!