r/spacex • u/rustybeancake • 6h ago
Artemis NASA’s new Moon plan is taking shape, but some big questions remain
r/spacex • u/starship-thread-sync • 2d ago
Avid Space Live Streams, which used to be known as LabPadre | NASASpaceflight Live Stream |
Flight 15
Launched on: Nov 13 2026, 22:45 from Starbase Pad 2 - official SpaceX page - https://www.spacex.com/launches/starship-flight-15 - After successful launch with 32/33 raptor engines functional and 6/6 raptor engines on the ship, the Booster catch attempt was aborted in the last minute and the booster landed in the sea. Vehicles: S42 and B22. Ship was successfully caught.
Liftoff succeeded. B22 performed a landing burn and splashdown in the Gulf rather than a tower catch: it was slightly low on propellant due to minor engine underperformance, which triggered redirection to a water landing rather than risk the launch mount/tower, whose loss could delay operations by months. A green flame was attributed to copper from the regenerative cooling circuit burning under oxygen-rich conditions as fuel depleted. Musk stated the booster loss does not change the timeline to high-volume fully reusable flights; engine performance/consistency improvements (Raptor V3.2) and a small flight-software adjustment (earlier MECO) are underway, and the next booster is nearly ready. Recovery teams secured the area, and Environmental Health and Safety personnel are recovering any debris reaching shore, with a stated commitment to protecting and restoring Boca Chica Beach.
The Ship completed orbital insertion (the second time) and deployed 26 Starlink V3 satellites (sequence ~42 minutes after launch), then entered a long coast phase with systems reported healthy, including the heat shield; live views were shared via Starlink. After roughly 14 orbits (~21–22.5 hours), S42 performed its deorbit burn, reentered, executed a banking maneuver and final approach, and was successfully caught by the tower arms at Starbase on November 14, 2026. SpaceX announced "Mechazilla catches Starship!" and posted a recap of the Friday liftoff / Saturday return, linking to the flight page; Musk shared phone video from the tower. This was the first catch of a Starship upper stage returning from orbit and the first recovery of an orbital-class ship at the launch site.
Flight 16
A December 10, 2026 planning window has been cited for Flight 16. Potentially Starship's Florida debut
As of November 17th 2026
| Ship | Location | Status | Comment |
|---|---|---|---|
| S40 | Giga Bay | Post-flight inspection | July 24th: Successful launch, deployed all satellites to a sub-orbital trajectory and splashed down softly in the Indian Ocean, resulting in a floating ship. August 25th - Oct 7: Shipped via Heavy Lift Vessel 'Forte' to Texas. Oct 13: Now vertical in a Mega Bay at Starbase alongside three other Ships, where it will provide first-of-its-kind data. Nov 7th: Rolled into the new Giga Bay. For more details see this page |
| S42 | Mega Bay 2 | Post-flight inspection work after Flight 15 | Nov 14: Launched on Flight 15, reached orbit, deployed 26 Starlink V3 satellites, then was caught by the tower after deorbit and reentry. Nov 15: Rolled back to MB2. For more details see this page |
| S43 | Mega Bay 2 | Stacked, remaining work ongoing | August 19th: N:3 and section FX:4 plus the pez dispenser moved into MB2. August 28th: Common Dome section CX:3 moved into MB2. September 1st: Section A2:3 moved into MB2. It has decals but no docking ports. September 4th: Section A3:4 moved into MB2. September 10th: Transfer Tubes moved into MB2. September 15th: Aft section AX:4 moved into MB2 and stacked - this completes the stacking part of S43's assembly. Oct 24: Cryogenic testing reported at Massey's. For more details on this vehicle see this page |
| S44 | Mega Bay 2 | Stacking | September 22nd: Nosecone+Payload Bay stack moved into MB2, and FX:4. September 23rd: Pez dispenser moved into MB2. Nosecone and payload bay integration in progress. For more details on this vehicle see this page |
| Booster | Location | Status | Comment |
|---|---|---|---|
| B23 | Mega Bay 1 | Post-cryo proof | August 14th: LOX tank sections A2:4 and CX:3 moved into MB1. August 27th: Methane Landing Tank and lower Transfer Tube moved into MB1 as well as section A6:4. September 8th: Aft section AX:2 and LOX Landing Tank moved into MB1. September 18th: Section FX:3 moved into MB1. September 24th or 25th: Fully Stacked, remaining work ongoing. Oct 13: Rolled out to Massey's Test Site for initial cryogenic proof testing. Oct 15: Extended cryogenic test campaign at Massey's, including a chill of roughly 12 hours (per NASASpaceflight). Oct 18: Returned overnight from Massey's to Mega Bay 1 at the production site following the cryo proof campaign; SpaceX has not publicly confirmed the test result. For more details on this vehicle and its assembly and testing see this page |
| B24 | Mega Bay 1 | Fully Stacked | November 22: Cryo Testing at Massey's Test Site. For more details on this vehicle and its assembly and testing see this page |
| B25 | Mega Bay 1 | LOX Tank Stacked | Nov 22nd: Aft section AX:2 moved from Starfactory to Mega Bay 1. For more details on this vehicle and its assembly and testing see this page |
Follow the Ringwatchers on Twitter and Discord for more.
Here's the section stacking locations for Ships and Boosters. Also some excellent detailed booster stacking information from zh_sos1. The abbreviations used in the above vehicle updates are as follows: HS = Hot Stage. PL = Payload. CX = Common Dome. AX = Aft Dome. FX = Forward Dome (as can be seen, an 'X' denotes a dome). ML = Mid LOX. F = Forward. A = Aft. For example, A2:4 = Aft section 2 made up of 4 rings, FX:4 = Forward Dome section made up of 4 rings, PL:3 = PayLoad section made up of 3 rings. Etc.
Something wrong? Update this thread via wiki page. For edit permission, message the mods or contact u/strawwalker**.**
We will attempt to keep this self-post current with links and major updates, but for the most part, we expect the community to supply the information. This is a great place to discuss Starship development, ask Starship specific questions, and track the progress of the production and test campaigns. Starship Development Threads are not party threads. Normal subreddit rules still apply.
We had no fewer than three members of the r/SpaceX mod team at Starbase, TX for the Flight 15 launch and landing! u/shahar603 travelled all the way from Israel and viewed them from a boat with fellow mod u/CAM-Gerlach’s Starfleet Tours operation. u/yoweigh (me) drove 12 hours from New Orleans and was granted media access, including a factory tour and a special viewing area at the employee housing site approximately 3 miles west of the pad. This post is my attempt to be a journalist and report about what I learned in the factory. We’ll create a second post about the overall experience, and I'll link it here once that's a thing.
MODERATOR ADVISORY: This has been designated a technical thread. As such, we will be clamping down on the rules very hard. This thread is for technical discussion of (and speculation from) my Starfactory tour experience. If you talk about pretty much anything else, your comment will be deleted. I’ll engage with any questions y’all have for me within those constraints. The second post will likely be a party thread where you can knock yourselves out mocking our clothing choices.
We were not permitted to bring our phones into the factory, so I don’t have any pictures from this tour. There are also a few topics that I’m not able to describe in detail. For example, I’m not allowed to sketch the factory layout from memory (yes, I asked) but I am able to give a broad description. I am, however, allowed to share a low-fidelity sketch of the super cool nosecone interior finishing jig I saw. I saw a lot of cool jigs, but that’s the only one I really geeked out over. It was a very fast-paced tour, so I wasn’t able to stop and soak in much detail until we got out to the booster megabay at the end.
The entrance to the factory looks and feels like a very futuristic office building, with high ceilings and a snazzy curvy reception area that looks like Wall-E’s girlfriend turned into a desk. Past that are the bathrooms and some office supply closets, including a merch store for employees. Beyond that begins the factory floor, which I’ll get to in a moment. From the reception area you enter the factory in the center aisle, and there’s a stairway to the left going up one level. We were taken up those stairs. From here you can access 3 stories of office space above the reception area, with lots of conference rooms and collaborative workspaces. That’s not what we’re here to tour, though. You can see that through the outside windows anyway.
When we reached the top of those stairs is when the tour really began. It was led by Dan Huot, SpaceX Communications Manager and frequent webcast beard guy, and Danny Fain, Senior Director of Starship Production & Engineering. I stuck with Danny for the whole tour and peppered him with questions throughout. (no offense, Dan, but he’s the factory guy at the factory tour) The whole thing felt like I was talking to someone about their Factorio game and how they planned to optimize their different science pack production lines, except his game is a lot more expensive and produces actual irl rockets. I’m pretty sure they just got a ton of white science packs with the ship return!
One of the primary goals of the Starfactory is to turn the space vehicle production line into something more akin to an automotive road vehicle production line. Tesla and SpaceX really do inform each other’s production processes. Traditional aerospace produces bespoke products. Even under a full production cadence, each unit produced is essentially a test article. This is because there is no mass production line, and individual vehicles are produced at such a slow rate that small changes are able to accumulate into large changes before they’re finished. A good example of this is how each Shuttle orbiter had its own idiosyncrasies because of the way they were designed/built.
SpaceX wants to make the Model T Ford of rockets, where the vehicles are produced so prodigiously and uniformly that it magically becomes cheap and reliable, just through its own inertia.
At this point the information started flooding out more quickly than I could keep up with. The factory can currently output a ship every 2 weeks and a booster every 4. This isn’t the time it takes to build one unit; it’s the rate at which they can spit them out of the production lines. The factory itself is divided into a ship lane and a booster lane, but they’re still working to completely separate the two. Initial ring production currently happens on the booster side and that’s become a bottleneck. Danny is working to get a second ring bay setup on the ship side to eliminate that bottleneck. At that point they’ll be almost entirely separate. There’s also a wide central aisle between them for people and supplies and ship parts to move through. Throughout the tour, work had mostly stopped and they were prepping to shut down the factory for launch, so I didn’t get to see how people actually use and work with the stuff I saw.
The top of the aforementioned stairs leads to a walkway which runs along the length of the factory one story above the factory floor, offering a nice and expansive view of what’s going on below. This is the ship side, so it was difficult to see what was going on with the boosters on the other side. Both sides are divided into bays where specific processes happen and individual ships and/or ship pieces flow through to the far end, where they go to one of the two megabays outside for stacking and engine installs. (more on that later) The first 3 ship bays are nosecone metalwork and 2 ring stacking bays. Bay 2 is for stacking the first few rings. Once it gets too tall for bay 2 it’s moved to bay 3, which is setup to work on higher stuff.
The nosecones are formed in bay 1 then skip to bay 4. (I’m not sure why it’s setup that way instead of using adjacent bays) This is where I saw that super cool finishing jig, which I made a rough sketch of. It has 3 round work platforms, with the widest platform on the bottom and the narrowest up top. Internal stairways allow workers to enter from the bottom and move up to their work stations. These platforms are attached to a wide central structural cylinder that functions as a giant toolbox. Each station has the tools it needs in shadowboxed containers attached to the cylinder. There are also a bunch of other toolboxes and storage bins and lights and whatnot scattered around the platforms. All the stuff each worker needs is easily accessible to them.
An overhead crane takes the nosecone from bay 1 and plops it onto the jig in bay 4. The whole jig fills up with people outfitting the interior surface in front of them: plumbing, avionics, cabling, tankage, structural reinforcements, moar struts, whatever. I imagine that techs move around in there from station to station as their specialty is needed in a choreographed sequence, but I can’t confirm that. This is when I noticed there are caches of pre-bent piping sections scattered all over the factory, presumably for people like these techs to install in the exact place each one is needed. That stuff’s got to be a huge pain to track and manage!
At this point we were shunted somewhere else, but I’ll finish describing ship production first. After the nosecone jig comes 3 aft production bays. This is the most complex part of the vehicle, as it has to be prepared to accept engines. Next are a few final stacking and integration bays, but I couldn't see them in detail. Presumably the finished nosecones are moved there from the jig in bay 4. I had some completely incorrect speculation about HLS here, but Dan told me it was as wrong as could be. There’s something related to HLS that’s being worked on in the final bay, but it’s not an actual lander. Maybe it’s a high-fidelity cabin mockup? I just don’t know. The rest of the factory floor on the ship side is being used as a staging area for gigabay construction. We only moved off of the elevated walkway because there was nothing interesting over there for us to see.
So at this point we’re about halfway through the factory and we get shunted down to the ground floor towards the center aisle. The first thing we see at the bottom of the stairs (other than more supplies of pre-bent plumbing) is the heat shield tile application area. There was a ship in this bay being worked on, but no actual work was happening for me to observe. This was just a “wow, that’s super cool” moment and I didn’t glean much of any information from it.
Once we reached the center aisle, Danny began describing the booster production line. The two are very similar, so I think my idea of how the other side works is pretty accurate. This is where the aft production bay details came from. As previously noted, the aft section is the most complex part of the build process. In these 3 bays they integrate a TON of plumbing (so more of those pre-bent caches) and avionics and tankage and moar struts and everything needed for the aft section to accept its engines and transfer their forces to the rest of the vehicle’s structure. Individual sections have all of their integrated stuff thoroughly tested before moving to the next stage of the process. In Danny’s paraphrased words, they make sure that all of the parts of the section can talk to everything it needs to talk to. Presumably this means that they simulate the rest of the rocket and they have the section talk to that sim without knowing it’s talking to a sim. I didn’t confirm that. There are 1 or 2 final stacking bays after that.
We have now reached the far end of the factory. From here, vehicles are sent to the 2 adjacent megabays for engine installation, final stacking, and integration. Leaving the factory, the ship megabay is to your right and the booster megabay is directly in front of you. The unfinished gigabay (more on that later) is to your left. Unfortunately, the ship megabay was closed. I’ve heard that it was open for the first group that went through before ours. It must have been closed immediately after they went through. Damn you and your green sticker, u/everydayastronaut!
Anyway, the boosters move into their megabay. There are 6 bays here, with 2 on each wall. To the right are aft bays, to the left are stacked boosters. Against the back wall are 2 engine installation bays. (I’m not 100% certain about that because the bays were empty) The bays have work platforms around them connected to geared elevators. The platforms are about the size of a scissor lift’s but they’re attached to a vertical geared rail instead of the scissor thingy. Below and between the rear bays is what’s called the raptor roost. Engines move from qualification testing at McGregor into this area for final qualification and installation. I got to learn about another super cool jig here! Danny described how they were able to reduce the individual engine installation time from 8 hours to just 30 minutes. After final qualification, the engines are lifted by a crane and placed on the mobile jig. (but I’m not sure if engine install happens in the aft bays or the bays in the back by the raptor storage/qual area) The jig is moved into the engine’s precise final location underneath its assigned aft section. A lifting mechanism of some sort, maybe hydraulic, raises it until the aft section “pierces” the engine. Then they just bolt it into place and they’re done. All of the plumbing and electrical connections are made through the jig’s precise alignment.
So to summarize the megabay workflow: aft sections get final stacking and integration to the right. They get their engines, maybe in the aft bays and maybe in the back by the raptor roost, then the completed aft sections move to the left and have the rest of the booster stacked on top. Danny talked about the gigabay for a bit here. It will have 24 concurrently active work bays, meaning that it can work on 24 rockets at once. That’s 4 megabays in one building! IMO that should dispel all the rumors about Starbase being limited to development as opposed to an active operational launch site. Why would they produce so many vehicles at a site solely meant for development? It’s possible that it will be used for manufacturing process development, I suppose. They’re still going to want to use those rockets if they’re at all able to, though. That means launching them.
Think of it this way: between the two megabays they currently have 12 bays total. This setup could support at least one launch a month, with no reuse whatsoever, because that’s how long it takes to pump out boosters. With the gigabay they’d be tripling their capacity, so that means three per month with no reuse. Now factor in reuse and assign some of those bays to refurbishment. At that point they start rapidly approaching their launch cadence targets. Then KSC comes online, which could even be as soon as Q1 2027, and they’ve got a second launch site. Then in a few years Starbase LA comes online. That gives them another 10 new launch pads and a scaled up factory with dedicated fluid resource pipelines. The launch cadence is going to be absolutely insane!
Note: I’m located in New Orleans, so Starbase LA will cut my drive time to see a launch by 75%! It’ll go from 12 hours to 3 hours. I’m really looking forward to that. So FYI I’ve clearly got a bias there.
r/spacex • u/rustybeancake • 6h ago
r/spacex • u/hitura-nobad • 7h ago
Welcome everyone!
| Scheduled for (UTC) | Nov 24 2026, 15:55 |
|---|---|
| Scheduled for (local) | Nov 24 2026, 07:55 AM (PST) |
| Launch Window (UTC) | Nov 24 2026, 15:55 - Nov 24 2026, 19:55 |
| Payload | USSF-266 |
| Customer | United States Space Force |
| Launch Weather Forecast | Unknown |
| Launch site | SLC-4E, Vandenberg SFB, CA, USA. |
| Booster | B1081-29 |
| Landing | The Falcon 9 first stage B1081 will land on ASDS OCISLY after its 29th flight. |
| Mission success criteria | Successful deployment of spacecrafts into orbit |
| Trajectory (Flight Club) | 2D,3D |
| Stream | Link |
|---|---|
| Official Webcast | X |
☑️ 750th SpaceX launch all time
☑️ 689th Falcon Family Booster landing
☑️ 237th landing on OCISLY
☑️ 234th consecutive successful SpaceX launch (if successful)
☑️ 130th SpaceX launch this year
☑️ 73rd launch from SLC-4E this year
☑️ 2 days, 3:31:04 turnaround for this pad
☑️ 39 days, 15:53:55 hours since last launch of booster B1081
Stats include F1, F9 , FH and Starship
| Time | Event |
|---|---|
| -0:38:00 | GO for Prop Load |
| -0:35:00 | Stage 1 LOX Load |
| -0:35:00 | Prop Load |
| -0:16:00 | Stage 2 LOX Load |
| -0:07:00 | Engine Chill |
| -0:01:00 | Startup |
| -0:01:00 | Tank Press |
| -0:00:45 | GO for Launch |
| -0:00:03 | Ignition |
| 0:00:00 | Liftoff |
| 0:01:07 | Max-Q |
| 0:02:26 | MECO |
| 0:02:29 | Stage 2 Separation |
| 0:02:36 | SES-1 |
| 0:02:56 | Fairing Separation |
| 0:06:03 | Entry Burn Startup |
| 0:06:27 | Entry Burn Shutdown |
| 0:08:01 | Stage 1 Landing Burn |
| 0:08:23 | Stage 1 Landing |
| Time (UTC) | Update |
|---|---|
| 20 Nov 18:31 | Now targeting Nov 24 at 15:55 UTC |
| 13 Nov 17:30 | Now targeting Nov 23 at 16:04 UTC |
| 10 Nov 16:25 | Now targeting Nov 18 at 16:49 UTC |
| 09 Nov 21:54 | Now targeting Nov 17 at 16:58 UTC |
| 09 Nov 21:01 | Added launch. |
Information on this thread is provided by and updated automatically using the Launch Library 2 API by The Space Devs.
| Link | Source |
|---|---|
| Flight Club | u/TheVehicleDestroyer |
| Discord SpaceX lobby | u/SwGustav |
| SpaceX Now | u/bradleyjh |
| SpaceX Patch List |
🥳 Launch threads are party threads, we relax the rules here. We remove low effort comments in other threads!
🔄 Please post small launch updates, discussions, and questions here, rather than as a separate post. Thanks!
💬 Please leave a comment if you discover any mistakes, or have any information.
✉️ Please send links in a private message.
r/spacex • u/Shahar603 • 23h ago
We had no fewer than three members of the r/SpaceX mod team at Starbase, TX for the Flight 15 launch and landing! u/shahar603 travelled all the way from Israel and viewed them from a boat with fellow mod u/CAM-Gerlach’s amazing Starfleet Tours operation. u/yoweigh drove from New Orleans and was granted media access, including a factory tour and a spectacular viewing location at the employee housing site approximately 3 miles west of the pad. We’re here to share our experiences with you. u/shahar603 was unable to gain media access due to ITAR restrictions, but CAM’s boat view is nearly as spectacular so that’s ok. We both had an amazing time!
45min after u/shahar603 arrived in south Texas, u/yoweigh completed his 11 hour journey from New Orleans, LA to McAllen, TX and picked him up. Then immediately ran out of gas. Fortunately, they were able to limp to a gas station and carry on. After another hour they arrived at Boca Chica beach, where they met up with u/CAM-Gerlach for a bonfire. We had a great view of pad B and the full stack!
First look at Starship from u/yoweigh's car window
Boca Chica bonfire with Starship in the background
We met SpaceX fans from the Netherlands, Canada and the entire United States. There were also a ton of Cybertrucks, which the bonfire members hooked up to do a lightshow.
It was a beautiful morning for launch day. Visibility was perfect with no clouds at all. This weather would persist throughout the day. We drove into Starbase early to get a daylight view of the full stack and u/yoweigh’s press badge under Hoppy. ChrisG was there and that was cool! Let me tell you, that stack did not disappoint! The level of public access available at Starbase is just absurd in comparison to what’s available at KSC in Florida. With the new pad B, you can get really close (~100m) to the flame trench and get a direct view of the entire stack from highway 4. It’s bonkers. We also got to see ship 40 inside the Gigabay.
At this point, the FAA still hadn’t provided a launch license for the flight. We went back to Port Isabel to get a late breakfast of chilaquiles, then split up. u/yoweigh drove to Starbase for the factory tour.
u/shahar603 ubered over to the southern tip of South Padre Island to meet up with u/CAM-Gerlach and his boats. Their viewing location was ~3.7 miles north of the launch pad. This provides optimal visibility for the (eastward) launch and a booster catch/divert view.
u/yoweigh’s factory tour is being reported in a separate thread. It’s marked as a technical thread with strict rule enforcement. Go over there if you want to really nerd out about the factory, or stay here if you want to have fun or make fun of us or whatever.
While on the bus to the factory tour, he had the pleasure of meeting Colleen Likedke, who is a photographer for NSF. Everybody should go check out her work! Her pictures are way better than u/yoweigh’s and they had the same view. She was the only person who seemed as dumbfoundedly enthusiastic to be there in the press pool as he was.
Afterwards, he was taken to the employee housing site approximately 3 miles west of the pad in preparation for the launch. Not only is this super close, but it’s got a great perpendicular view of the landing sequence rotation. This was a big catered event, with fancy food and couches setup to watch the webcast in view of the pad. Outside there was a raised platform with another big webcast display and a PA system. He even got a few swag bags!
Starship launched a few minutes into the window, and we couldn’t have asked for better views.
Ignition was unbelievably bright. Imagine someone striking a match right in front of your face in a dark room. That’s what it felt like. The videos really don't do it justice. We had a clear view of the stack from liftoff through MaxQ and all the way to hot staging. After staging, we kept our eyes on the booster and followed it all the way down to its landing burn over the ocean. It hovered for a few seconds, then we saw a green flash from the engines and the FTS blew it up.
Right as we saw the explosion, a sonic boom hit the boat and nearly knocked u/shahar603 off his feet. Later, we spoke to a few launch veterans, including Tim Dodd (Everyday Astronaut). Every one of them said it was the loudest sonic boom they’d ever heard at a rocket launch.
After the launch, u/CAM-Gerlach, u/yoweigh, u/shahar603 and the Starfleet crew met up at HopperHaus, a Starship and Starhopper-themed bar where space fans go to celebrate. Post-launch traffic was brutal, but we made it eventually!
We stayed until 1 a.m. and had drinks with every space fan in the bar. We met a bunch of cool people, including Everyday Astronaut, and even a four legged fan named Ella. She’d already been to two Starship launches and had the patches on her harness to prove it.
We woke up, checked the stream to make sure Starship was still doing fine in orbit, and got on with our day. We had a solid blanket of clouds this time, but there was no fog and we could see the landing tower perfectly. After getting some huevos rancheros for breakfast, we split up again. u/yoweigh headed to the SpaceX viewing site, and u/shahar603 got back on the boat. In clear skies, we would’ve been able to pick up the ship from pretty far away and watch it circle around Starbase on its way to the tower. With the cloud cover, all we could do was watch the tower and wait. ~30s before landing, Starship burst through the clouds,lit its engines, did the flip, and landed on the tower!!!
We were too busy watching the ship to film it, and the pros took much better footage anyway.
We went to HopperHaus again, still super excited from the landing.
SpaceX safed Starship pretty quickly, so about 3 hours after landing, u/shahar603, u/yoweigh, and u/CAM-Gerlach hit the road to Starbase to witness the ship on the tower.
SpaceX threw a massive party at Starbase, with a giant green laser, lights aimed at the stars, and bungee jumpers doing acrobatics on Gigabay.
The next morning, we went to Boca Chica highway 4 again to view the ship in daylight. It was marvelously stuning. u/yoweigh and u/shahar603 were about to head back home when we heard the rollback will start in 1 hour.
We met up with u/CAM-Gerlach and the starfleet team about 200 yards from Starship and watched the ship being lowered into the SPMT.
In the meantime the sheriff made everyone move their cars ~3 feet off the road, to allow for enough clearance for the SPMT carrying Starship.
Coincidentally, a black Nissan parked next to us was parked too close to the road, and the owner was nowhere to be found. Ship 42 halted in place and was blocked by a Nissan
The sheriff, together with SpaceX representatives, started looking for the guy. We asked them if we could try to lift and push the car, but they told us to wait for the owner to come back to move his car. After 2 hours he finally did come! Ship 42 was on its way home!
The rollback was AMAZING!! We got <2 meters from the ship. For ~2 hours we walked from the landing tower to the Starbase factory together with the ship and a ton of other space fans. We could see insane details, like the broken tile, discoloration patterns of the stainless steel and the scraping from the chopsticks under the landing mounts.
This really was a life changing experience, and we are so thankful to SpaceX for letting us space fans interact with the Starship program so closely.
Visiting the Ship's 42 launch, landing and rollback have been some of the most incredible days in my life. To me, Starship is the holy grail of launch vehicles. Watching it in action was mind-boggling, and I still can’t quite believe I was there. I also loved getting to meet u/yoweigh, u/CAM-Gerlach, the Starfleet team, and so many other space fans who came to Starbase for the launch. It was great to share the experience with people who were just as excited to be there.
The factory tour I got was incredible. The launch was super intense. The landing was a cinematic masterpiece. Rollback was ridiculous with the level of access provided. I can’t even decide which one was the coolest. SpaceX fed me caviar! What a crazy weekend. It was great seeing everyone, and an honor to give u/shahar603 a space nerd tour of the US. I hadn’t been to Starbase since IFT-2. We also visited JSC in Houston on the way back!
r/spacex • u/hitura-nobad • 1d ago
Welcome everyone!
| Scheduled for (UTC) | Nov 22 2026, 12:23:56 |
|---|---|
| Scheduled for (local) | Nov 22 2026, 04:23:56 AM (PST) |
| Launch Window (UTC) | Nov 22 2026, 12:16:00 - Nov 22 2026, 12:46:00 |
| Payload | NROL-136 |
| Customer | National Reconnaissance Office |
| Launch Weather Forecast | 100% GO |
| Launch site | SLC-4E, Vandenberg SFB, CA, USA. |
| Booster | B1097-14 |
| Landing | The Falcon 9 first stage B1097 has landed on Landing Zone 4 after its 14th flight. |
| Mission success criteria | Successful deployment of spacecrafts into orbit |
| Trajectory (Flight Club) | 2D,3D |
| Stream | Link |
|---|---|
| Unofficial Re-stream | The Space Devs |
| Unofficial Webcast | Spaceflight Now |
| Official Webcast | X |
☑️ 749th SpaceX launch all time
☑️ 688th Falcon Family Booster landing
☑️ 39th landing on LZ-4
☑️ 233rd consecutive successful SpaceX launch (if successful)
☑️ 129th SpaceX launch this year
☑️ 72nd launch from SLC-4E this year
☑️ 1 day, 8:03:21 turnaround for this pad
☑️ 66 days, 11:16:00 hours since last launch of booster B1097
Stats include F1, F9 , FH and Starship
| Time | Event |
|---|---|
| -0:38:00 | GO for Prop Load |
| -0:35:00 | Stage 1 LOX Load |
| -0:35:00 | Prop Load |
| -0:16:00 | Stage 2 LOX Load |
| -0:07:00 | Engine Chill |
| -0:01:00 | Tank Press |
| -0:01:00 | Startup |
| -0:00:45 | GO for Launch |
| -0:00:03 | Ignition |
| 0:00:00 | Liftoff |
| 0:01:02 | Max-Q |
| 0:02:11 | MECO |
| 0:02:14 | Stage 2 Separation |
| 0:02:22 | SES-1 |
| 0:02:27 | Booster Boostback Burn Startup |
| 0:02:59 | Fairing Separation |
| 0:03:22 | Booster Boostback Burn Shutdown |
| 0:05:53 | Entry Burn Startup |
| 0:06:10 | Entry Burn Shutdown |
| 0:07:09 | Stage 1 Landing Burn |
| 0:07:34 | Stage 1 Landing |
| Time (UTC) | Update |
|---|---|
| 22 Nov 14:41 | Launch success. |
| 22 Nov 12:24 | Liftoff. |
| 22 Nov 12:09 | Unofficial Re-stream by SPACE AFFAIRS has started |
| 21 Nov 20:51 | Now targeting Nov 22 at 12:23 UTC |
| 20 Nov 16:15 | Now targeting Nov 22 at 12:16 UTC |
| 12 Nov 19:12 | Added launch. |
Information on this thread is provided by and updated automatically using the Launch Library 2 API by The Space Devs.
| Link | Source |
|---|---|
| Flight Club | u/TheVehicleDestroyer |
| Discord SpaceX lobby | u/SwGustav |
| SpaceX Now | u/bradleyjh |
| SpaceX Patch List |
🥳 Launch threads are party threads, we relax the rules here. We remove low effort comments in other threads!
🔄 Please post small launch updates, discussions, and questions here, rather than as a separate post. Thanks!
💬 Please leave a comment if you discover any mistakes, or have any information.
✉️ Please send links in a private message.
With SpaceX reportedly being unwilling to sign launch contracts for launches after 2028, there is a shortage of launch supply.
An elegant solution to this might be for some enterprising US citizen to buy the Falcon rocket from SpaceX. I imagine the manufacturing side of Falcon would be mostly happy to join the new company rather than transfer to work on Starship (particularly if the new company keeps them in LA instead of telling them to move to Texas/Louisiana).
The tricky part is probably launch sites. I can imagine SpaceX being willing (though not happy) to sell SLC-40 and SLC-4E to Falcon Launch Services, Inc. But where will Falcon Heavy launch from? A pad-sharing agreement with SpaceX for LC-39A?
Launch staff may also be an issue. I can imagine most of the existing staff want to work on Starship, so that may require a lot of new hiring.
Recovery vessels should also be part of the package; Starship doesn't need them.
Dragon would be a separate matter. I don't think NASA are happy about SpaceX pulling out of Dragon missions, but equally I don't know that this is a frequent enough mission to be worth FLSI buying Dragon and continuing to maintain it.
r/spacex • u/rustybeancake • 4d ago
Tweet link: https://x.com/spacex/status/2123097995679867195
r/spacex • u/rustybeancake • 4d ago
r/spacex • u/Royal_Platform_6754 • 6d ago
r/spacex • u/Royal_Platform_6754 • 6d ago
r/spacex • u/CProphet • 7d ago
r/spacex • u/travlplayr • 7d ago
r/spacex
•
u/rustybeancake
•
8d ago
r/spacex • u/rustybeancake • 8d ago
r/spacex • u/rustybeancake • 8d ago
r/spacex • u/dedarkener • 8d ago
r/spacex • u/rustybeancake • 8d ago
r/spacex • u/CProphet • 9d ago
r/spacex • u/rustybeancake • 9d ago
Tweet link: https://x.com/spacex/status/2121044579470233638
r/spacex
•
u/rustybeancake
•
12d ago
Tweet link: https://x.com/spacex/status/2120220290219208884