r/stonemasonry • • 1h ago

What mix the thinstone veneer?

2 Upvotes

I’m looking at doing a large stone veneer installation using thin cut fieldstone rounds. Usually we would use ardex 77, but, I want the mortar to squeeze out of the joints, and then get raked back for a dry look but no voids.

We mostly do smaller veneer applications for kitchens, fireplaces, etc, but not large scale foundations.

I’ve seen other high end companies using another mix but I doing know exactly what. I believe it’s mostly Portland and a little sand, it’s pretty dark looking and they’re mixing it in a drum mixer and doing a scratch coat first. It seems cheaper, and easier to deal with in the joints.

Does anyone know what this method is


r/stonemasonry • • 1d ago

3 step or 7 step for engineered quartz?

Thumbnail
venompads.com
1 Upvotes

My family home is full of quartz counter tops that are worse for wear. I want to polish them before selling the house.

Came across this article that says 7 step grit sequences are better for granite and marble.

Is it worth putting in the extra work with 7 step just for a better finish on quartz??


r/stonemasonry • • 2d ago

Leathered soapstone?

Thumbnail reddit.com
1 Upvotes

r/stonemasonry • • 3d ago

Usually I just post the stone work, here’s how it all comes together in the end

Thumbnail
gallery
36 Upvotes

Most of the time I share the stone fabrication and install side of things, which can look pretty raw or fragmented while it’s being built. Here’s how the whole picture comes together once the plaster, steelwork, and lighting are all in place.


r/stonemasonry • • 4d ago

Cladding the start of a wooden staircase with custom profiled stone

Thumbnail
gallery
23 Upvotes

r/stonemasonry • • 5d ago

Cathedral pinnacle replacement

Thumbnail
gallery
98 Upvotes

I work as a apprentice cathedral stone mason. As it gets to cold to work outside, my boss and I take apart these limestone pinnacles to template and then re-carve them over the winter. Hopefully he will let me do a little bit of the carving.


r/stonemasonry • • 6d ago

Does $1,272 seem high for four bluestone caps?

Thumbnail
gallery
1 Upvotes

Pricing four pieces of 2-inch thermal-finish bluestone caps (photo with exact dimensions attached). Total is about 7.35 sq ft. Quote came back at $1,272 including tax - roughly $163 per sq ft before tax.

I included a photo of stone ill be using. And a layout of the dimensions i need.

Does that sound high, low, or about right in your area? What usually drives the price on small custom jobs like this? I get that custom cuts and edge finishing add cost, just trying to make sure I'm not getting taken.

Appreciate any feedback from people who work with bluestone regularly.


r/stonemasonry • • 7d ago

European Winder Stairs: The ultimate geometry puzzle in stone cladding.

Thumbnail gallery
71 Upvotes

r/stonemasonry • • 8d ago

Simple plinth, big impact.

Thumbnail
gallery
12 Upvotes

Just a simple Belgian bluestone plinth. It’s a straightforward detail, but if you nail the execution, it brings so much grandeur and weight to the architecture. Kept it minimal and making sure it reads as solid stone. Simple yet grand!


r/stonemasonry • • 9d ago

Hand-chiseled bluestone

Thumbnail
gallery
34 Upvotes

r/stonemasonry • • 9d ago

Need identification

Thumbnail
gallery
9 Upvotes

I’m doing a demo and repair job and I need to match the existing stonework. Can anybody identify this stone? I checked the building records and asked the owners I’ve also scoured the internet but can seem to find what this is. Any help is much appreciated! The stone on the bench wall is the same as the house just looks a different color because it’s falling apart.


r/stonemasonry • • 9d ago

Looking to possibly update this fireplace. Please help with some advice.

Thumbnail gallery
2 Upvotes

r/stonemasonry • • 10d ago

​How hard is it to find someone skilled in irregular flagstone installation (crazy paving)?

Post image
11 Upvotes

How hard is it to find someone skilled in irregular flagstone installation (crazy paving)?

​I’m looking into putting up some irregular stone slabs (around 3-4 cm thick) for flooring/walls. I have a few questions for anyone in the trade:

​1. How difficult is it to find a qualified craftsman who actually knows how to lay this properly?

​2. How time-consuming is the process of hand-picking and fitting each irregular piece like a puzzle?

​3. Have you ever turned down a job like this because it requires specific skill? Or, if you're a mason, have you ever rejected one yourself?

4)If you have pictures handy, I’d love to see examples of both well-done jobs and terrible screw up along with a quick explanation of why they are good or bad.

​I’m interested in hearing perspectives from all sides;whether you're a general contractor, an architect, a site supervisor, or the actual mason doing the installation. What has your experience been?


r/stonemasonry • • 11d ago

Asking advice for beginner moving to intermediate.

Post image
8 Upvotes

I've been building a house into the side of a mountain for the last 4 months and slowly carving the hill side into benches and shelves. I've just been using a metal mallet, an iron spike and a cheap ?iron? chisel that were given to me.

I'm really loving the work and wanting to invest like like 300-500 into core durable tools.

I have no idea how I'm supposed to do anything tbh so don't assume I'll know anything but I do have a good feel to flattening rocks(with my iron spike and basic chisel).

I saw online recommendations to carbie tools from trow and holden. Specifically that I should get a good pitching wedge and a tracer? But when I searched nothing on there site was called a pitching wedge or pitching chisel haha. And tbh I can't really see huge differences between the Google images of a pitching wedge and a tracing chisel. I'm thinking I can get away with my iron spike instead of getting a fancier point? But tell me if thats a bad idea lol.

Help would be greatly appreciate. Especially direct links to what to buy.


r/stonemasonry • • 10d ago

Flagstone patio question

Thumbnail reddit.com
1 Upvotes

r/stonemasonry • • 10d ago

How bad is this foundation…

Thumbnail gallery
2 Upvotes

r/stonemasonry • • 13d ago

Updated picture

Post image
26 Upvotes

r/stonemasonry • • 12d ago

What would cause this scoring?

Thumbnail gallery
0 Upvotes

r/stonemasonry • • 13d ago

Question for other memorial masons - software recommendations?

1 Upvotes

Hi everyone, my workshop is in the north-west of England, and we do decently for ourselves (have a few masons on hand), but I feel a little outdated with some of our practices.

I took over from my dad when he retired, and we are basically running it in the same way (if it ain't broke... etc. etc.). I wanted to see if there are any systems that are worth updating/replacing with some sort of software.

The main things that come to mind are:

- When clients come into our showroom, we generally show them a selection of headstones we have inside and then often a catalogue of past work. Has anyone thought about using some sort of app/visualiser for this? Is it worth it, and what would the cost be?

- Shopping around for something that can help with our form finding/filling, etc. We provide for quite a few areas and church grounds, so every so often it requires calling up and asking if their fee has changed, etc. This side of admin feels like its own full-time job, but I haven't personally heard of any alternative.

My dad thinks that low-key traditional way of handling things is best, but I'm not sure. I would love to hear some opinions (from across the globe too!)


r/stonemasonry • • 13d ago

UK: Where can I find a reclaimed coping stone?

1 Upvotes

Hello! I’m looking to repair part of an old sandstone wall. The wall is curved, and I’m having trouble finding a curved coping stone to match.

The existing coping stones are about 12” at the base, 8” tall and have chamfered edges

Can anyone tell me where one would look to find something like this?


r/stonemasonry • • 13d ago

Seeking advice on stacked stone install regarding trip pieces around edges

Thumbnail i.redd.it
1 Upvotes

edit: looks like the photo didnt upload porperly, but hopefully my question can be answered without it.

Im installing stacked stone surround my new fireplace. The wall is in a corner and the face of the wall is about 70 inches wide and then turns back to the main walls. In the photo I've shared, there are two vertical red lines showing where the stone will stop on the sides, and will transition to drywall that will wrap the corner. With the wall at 70 inches, the stone will span 64 inches with three inches of drywall on either side before the corner turns back to the main walls.

My question - is there some type of trim piece I should be using around the outside of the stone to cover the sides or is it normal to leave the side of the stone exposed? Im not as worried about the top as there will be a mantle right above the stone.


r/stonemasonry • • 13d ago

Beeck Mineral Paint - Concrete Stone Glaze

Thumbnail
gallery
3 Upvotes

As a follow up to an earlier post, just wanted to share the after pic from staining the quartz. I used Beeck Mineral paint, concrete/stone glaze. This is after second coat application (almost done) - And plan to deepen the mortar color afterwards.


r/stonemasonry • • 13d ago

Advice On Granite Work

3 Upvotes

Any advice would be appreciated.

My wife had a miscarriage a few months ago and we are both absolutely devastated. I want to make a stone in honor of my child, but cannot afford to pay a professional to make one.

I can afford to buy a granite boulder, but I would want to face it off and engrave it.

Where do I start? Any advice would be immensely appreciated.