A few weeks ago this thing was just a CAD file, and tonight it showed me craters. Pretty happy about that.
Everything is printed except the glass and a few screws: the tube, dust cap, the tripod, and a helical focuser with about 120mm of travel. The focuser has no bearings or rails, just a screw riding in a slot so the shaft moves in and out instead of spinning. I shot these from Colombia at around 2,650 m with my phone held against the eyepiece.
The optics are a 50mm achromatic doublet from AliExpress that was sold as 600mm focal length, but in my testing it's more like 300 to 450mm. I'm using a 90 degree mirror diagonal and Plössl eyepieces (10mm and 20mm).
Here's the weird part. My sharpest image came after I flipped the flint element from the textbook orientation. So either the lens came assembled wrong from the factory, or I'm covering up some other problem and I don't know which.
Things I'm trying to fix: purple and yellow fringing on the edge of the Moon, a glowing halo around the disk, and detail that looks soft even at best focus.
If anyone has ideas I'd really appreciate it. Mainly wondering if the flipped flint thing points to bad assembly, spacing or tilt, what the easiest way is to measure the real focal length, whether flocking the tube or adding printed baffles would help with the glare, and any tricks for getting sharper phone shots through the eyepiece.
The files are free and fully editable (STEP included) if you want to build one or improve it:
https://www.thingiverse.com/thing:7430590
Feel free to roast it. Anything I learn here goes into version 2. Thanks!