r/tradfri • • 19h ago

OTHER How is the situation with Google Home?

2 Upvotes

This is my first time trying anything smarthome related and I found a solution for my problem with the IKEA Home Smart but I am reading that Google Home can be a problem. These information are at least 6 months old so I am wondering if this is still valid?
I want to use the TIMMERFLOTTE (temperature sensor) as part of an automation to use my airconditioning and for that it needs to connect to Google Home. I am wondering is it (and anything else like light bulbs) can connect to something as a Nest Hub (second gen) without problems or that the only way is to use the IKEA smart hub.


r/tradfri • • 1d ago

SUPPORT (ONGOING) Checking my IKEA Kitchen & Wardrobe order

1 Upvotes

Hi everyone, earlier this year I placed an order for an IKEA kitchen and a PAX wardrobe but due to ongoing delays in my new home, I am finally having everything delivered next week.

I am hoping to have a quick check on my order list and an answer to the questions I have.

In my kitchen order I have:

  • 1 x IRSTA LED worktop lighting 40 cm
  • 3 x IRSTA LED worktop lighting 60 cm
  • 1 x IRSTA LED worktop lighting 80 cm
  • 2 x TRÅDFRI 30w wireless control
  • 1 x FÖRNIMMA Intermediate connection cord
  • 1 x FÖRNIMMA Power supply cord
  • 1 x BILRESA Remote control

For my wardrobe:

  • 2 x ÖVERSIDAN LED wardrobe lighting strp w sensor
  • 1 x MITTLED LED spotlight, dimmable
  • 2 x TRÅDFRI 30w wireless control
  • 2 x BILRESA Remote control
  • 2 x FÖRNIMMA Power supply cord

My questions:

  1. It would make sense to replace the 4 x TRADFRI with the new DUBBELKISEL 30w wireless control, right?
  2. When the installers install the kitchen, where do they usually put the wireless control driver? The top of my kitchen cabinets will be hidden with an upper front panel that goes up to the ceiling so is it possible to have this driver in one of the upper cabinets instead?
  3. For the wardrobe, since the MITTLED is the spotlight in the middle open cabinet, would it make things more simple to have it connected to a ANSLUTA LED driver with cord so there is a physical on/off switch vs the wireless remote control?
  4. Also for the wardrobe, perhaps even the VERSIDAN lighting strip could be connected to the same ANSLUTA cord with the physical on/off switch since the lighting strip turns on/off with the door opening?

r/tradfri • • 1d ago

SUPPORT (2026 PRODUCTS) Help with connecting DIRIGERA to Apple Home

6 Upvotes

About 4 months ago I set up a new Dirigera with a new set of lights and sensors and followed the app’s setup process for integrating them with my Apple HomePod mini. All lights (not sensors) were connected through the ikea hub to Apple home. Everything worked as expected, the daylight cycling worked fine with Apple home.

A few weeks ago the IKEA app told me I need to reconnect them, so I followed the instructions, but as soon as I disconnected it, the integration button vanished from the app, and only allows for connecting old zigbee devices (or show matter pairing codes).

To reconnect them, I had to re-pair each device in my home to Apple home (exceedingly tedious as devices can take literally hours to show their code). And now I’m left with a subpar system where the daylight cycling is broken if the lights are ever controlled by Apple home, only to be restored if you turn the lights on and off through the ikea app.

Has anyone else experienced this? Is there a better or correct way to link a dirigera hub setup with Apple home? Why did IKEA change this and make the experience objectively worse?


r/tradfri • • 1d ago

3RD PARTY APP Moving away from hue. Alternative version of 'scenes'

Thumbnail reddit.com
0 Upvotes

r/tradfri • • 1d ago

SHARE YOUR SETUP Ideal Dirigera/Wifi setup for a duplex

1 Upvotes

Hi all,

I have a tricky situation in a duplex.

Wifi setup is as following:

- main router 'WIFI network 1' on 1st floor

- while on the 2nd floor is a wifi repeater with a kind of separate network called 'WIFI Network 1- repeater'.

Dirigera is connected to the main router on 1st floor. It communicates perfectly with the devices on the 1st floor.

The problem is that this Dirigera located on the 1st floor is not reaching the devices on the 2nd floor. Cannot control them.

Initially I thought to just buy a 2nd Dirigera and connect it to the repeater; well, the issue is that the repeater does not have LAN ports.

I am searching for a good solution, please, dear friends :( any opinion is welcome. TIA!


r/tradfri • • 1d ago

SUPPORT (2026 PRODUCTS) Help with connecting DIRIGERA to Apple Home

0 Upvotes

About 4 months ago I set up a new Dirigera with a new set of lights and sensors and followed the app’s setup process for integrating them with my Apple HomePod mini. All lights (not sensors) were connected through the ikea hub to Apple home. Everything worked as expected, the daylight cycling worked fine with Apple home.

A few weeks ago the IKEA app told me I need to reconnect them, so I followed the instructions, but as soon as I disconnected it, the integration button vanished from the app, and only allows for connecting old zigbee devices (or show matter pairing codes).

To reconnect them, I had to re-pair each device in my home to Apple home (exceedingly tedious as devices can take literally hours to show their code). And now I’m left with a subpar system where the daylight cycling is broken if the lights are ever controlled by Apple home, only to be restored if you turn the lights on and off through the ikea app.

Has anyone else experienced this? Is there a better or correct way to link a dirigera hub setup with Apple home? Why did IKEA change this and make the experience objectively worse?


r/tradfri • • 1d ago

NEW 2026 PRODUCTS New GU10 Matter Lamps are not corectly working with a timeplan added

Post image
1 Upvotes

Hi Tradfri Community,

i got myself a new GU10 RGB(W) Lamp with Matter Control.

Everything is working fine until i want to add it into my timeplan. Then there is suddenly a purple tint. Changing to the exact same solid color, not a single color tint anywhere.

Is that a Software problem and it will get fixed anytime soon? Im using the Ikea Dirigera Hub with the Standard Ikea App. I just found the same problems from other people here using other hubs and apps, so hope thats a new topic here.


r/tradfri • • 2d ago

Feature Request Any IKEA engineers in the sub? Is Matter binding for buttons and sensors in your roadmap?

48 Upvotes

I love your products, but would love to use Matter binding with the buttons and sensors. Do you have any word on that?

If you're not planning that, could you elaborate why?

Thank you!


r/tradfri • • 2d ago

SUPPORT (2026 PRODUCTS) Ikea Smart Home + Google Home

2 Upvotes

Starting off with some context, my home generally runs on the Google product ecosystem. I have a Nest Hub and also a Google Streamer 4K so I figured I was covered in terms of having a thread border router.

I decided to give the Ikea smart products a try on a whim. I have very basic smart home needs and already had a couple of TPLink smart plugs and light bulbs. They work fine but since they're over wifi, the response time is not the greatest so I wanted to give Matter over Thread products a try

So far, I'm fairly happy with the KAJPLATS bulbs. Love how noticeably brighter they are at 1100 lumens than the TPLink which are 800 lumens. One complaint? I had no idea there was a colour version and a version that was white spectrum only and the packaging wasn't super obvious at first glance. No problem. I'll just have to go exchange.

Then I also got the GRILLPLATS smart plug. Seems super responsive compared to the TPLink that takes 2-3 seconds to activate at times.

But here's the main problem so far and perhaps I'm just ignorant of the options at the moment. Google Home doesn't seem to provide any options outside of basic on/off. Ideally, I would like to at least have scheduling and auto shutoff for the smart plug. One function I use a lot for a smart plug is when I turn on on a fan, I want it to auto shutoff after an hour.

What's a good way to accomplish this and/or whatever other functionality that the Ikea products provide (i.e power monitoring, etc.)? Do I need the Ikea hub? Or will I have to setup something like Home Assistant?

Thanks


r/tradfri • • 1d ago

SUPPORT (2026 PRODUCTS) Issues with ikea devices and Apple TV

0 Upvotes

Loosing my mind trying to diagnose this, I should have listened to the reviews! Posting here in a last ditch effort before I return them

Below is an AI overview of what I’ve tried to do to fix an issue with my full setup via HomeKit, any advice would appreciated. I’m pretty close to returning every device and looking for another solution

My IKEA lights worked fine for two weeks, then broke last night, with lights, sensors and switches showing as no response or showing available, but turning them on or off via HomeKit did nothing

I rebooted the router and the Apple TV and randomly, an hour later, they worked. This morning they were broken again. After a couple more reboots I got another hour out of them, and now they’re broken again.

I’ve got 30 KAJPLATS bulbs (16 GU10s, 8 E14s and 6 E27s), plus IKEA sensors and remotes. My only Apple Home hub is a wired Apple TV 4K (3rd gen, or latest version) wired to an eero Pro 6E. Thread is off on the eero. The Apple TV runs Thread on channel 25. I’ve also tried setting the Apple TV to WiFi.

Some bulbs show **No Response**, others look online but do nothing when I tap them, then change minutes later. This happens across different rooms, even when I’m just turning one bulb on or off.

I spent hours on this with ChatGPT. I ran network tests from my Mac and pulled several Apple TV sysdiagnoses for it to compare. Even during an outage, the Mac could still see the Thread border router over Bonjour and two of the affected GU10s answered all five IPv6 pings each.

The TV logs showed **63 Matter discovery timeouts across 22 IKEA devices after a restart**. Some commands sat in the Apple TV’s queue for **5–9 minutes before it even sent them**. One GU10 ignored four retries on an old Matter session, then answered in **293 ms** on a fresh one.

The temperature sensors were timing out too, so I wondered if a sensor or remote was causing trouble on the mesh. I took the batteries out of every one of them. After a reboot the lights recovered for a bit, then the whole thing broke again with the batteries still out. I also tried leaving the 16 GU10s off at the wall for ten minutes.

I’m pretty much done troubleshooting and looking at returning the lot. Posting here as a last ditch effort:

Has anyone seen this and found a fix that stuck?


r/tradfri • • 3d ago

NEW 2026 PRODUCTS BLÅSBÄLG and SJÖMANING filter and Matter details

Thumbnail
gallery
90 Upvotes

IKEA has added some details to the Good to know section in its product data for the upcoming air purifiers.

For BLÅSBÄLG, it says:

BLÅSBÄLG air purifier uses STARKVIND particle filter and gas filter.

For SJÖMANING, it says:

SJÖMANING air purifier uses FÖRNUFTIG particle filter and gas filter.

Both products also have this statement:

This product uses Matter over WiFi, which means that you need a Matter controller like, for example, our smart hub.

Price:

BLÅSBÄLG:
CA: 179 CAD
CH: 99.95 CHF
DE: 129 EUR
DK: 699 DKK
MA: 1,299 MAD
SA: 599 SAR
SE: 995 SEK
US: 149.99 USD

SJÖMANING:
CA: 129 CAD
DE: 59.99 EUR
DK: 399 DKK
MA: 799 MAD
SE: 599 SEK
US: 79.99 USD


r/tradfri • • 3d ago

SUPPORT (ONGOING) Issues with IKEA KAJPLATS GU10 bulbs via Matter in Home Assistant – anyone else?

6 Upvotes

Is anyone else experiencing issues with the IKEA KAJPLATS GU10 bulbs when using them via Matter in Home Assistant?
I have several KAJPLATS GU10 bulbs connected to Home Assistant via Matter and grouped together. However, quite regularly, when I turn on/off the group, only one of the bulbs actually responds, while the others don’t.
The individual bulbs work fine when I control them separately.
Has anyone experienced the same issue with KAJPLATS GU10 and Matter? Could this be related to Matter, Home Assistant, or the way the group is configured?
My setup:
Home Assistant
IKEA KAJPLATS GU10
Matter
Multiple bulbs grouped together
Issue: Group command → sometimes only one bulb responds
Is there a known fix or workaround for this?


r/tradfri • • 4d ago

NEW 2026 PRODUCTS LILJEBAGGE DE

Post image
146 Upvotes

i just checked the Ikea App in germany and they listed it for 15 Euros but not yet available. Have a beautiful day.


r/tradfri • • 4d ago

DISCUSSION iPhone widget to display myggbett door state?

2 Upvotes

I got a myggbett sensor to try out. My home has two balcony doors and three openable windows. I would like to have some way of seeing if they’re all closed at a glance.

From someone else’s reddit post I found out that there’s a security widget for the iPhone’s lock screen. Theoretically it does exaxtly what I want it to, but practically it doesn’t work properly.

I can see the status of my door update perfectly in the home smart app. I can see it work reasonably well in the apple home app. The widget however still shows that the door is open, even though it’s been closed for 20 minutes.

Is there a different way to make this work?


r/tradfri • • 4d ago

PRODUCT QUERY Can you connect to a DIRIGERA on a different network?

2 Upvotes

We are looking to get a DIRIGERA hub and connected plugs and bulbs, but we have a concern.

Our home wifi is too weak to stretch across the house, so we have a tp-link installed (connected to the router and another device plugged in upstairs" that spreads the wifi over two networks: "wifiname_main" and "wifiname_upstairs".

If we got a DIRIGERA and connected it to the router like it says, and then wanted to control the devices in the house, would anyone connected to "wifiname_upstairs" not be able to control it because they're technically on a different network?

Additionally, could you connect to the hub when you're out and on mobile wifi, for instance, to turn the lights on or off?


r/tradfri • • 4d ago

SUPPORT (2026 PRODUCTS) Sharing Ikea matter devices from Apple Home into Home Assistant

Thumbnail reddit.com
0 Upvotes

r/tradfri • • 5d ago

OTHER Just making sure all Zigbee devices are sold out at my local IKEA

Post image
1 Upvotes

r/tradfri • • 5d ago

SUPPORT (ONGOING) Dirigera needs an unplug/replug after every power cut or Apple Home shows everything as "No Response"

10 Upvotes

Hey all, and u/tradfri if you see this.

We had a power cut earlier and my Dirigera came back online but the lights stayed on "No Response" in Apple Home. I waited around 15 minutes and nothing changed, so I pulled the plug on the hub and plugged it back in, and everything worked within seconds. This isn't the first time, it happens after pretty much every outage.

From what I could see on my network, the hub itself was up within a minute of power coming back (it was talking to IKEA's servers, checking for firmware, etc.), so it looks like only the Matter/HomeKit part gets stuck. My router is slow to boot after a cut, so I wonder if the hub starts before the network is fully ready and never retries. Just a guess though.

I found this older thread with the same problem: https://www.reddit.com/r/tradfri/comments/1edna1h/ and people there ended up putting the hub on a smart plug and power-cycling it, which feels like a workaround and not a fix.

So a few questions:

  • Is this a known bug, and is a fix coming?
  • Is there any way to restart the hub from the app without unplugging it?
  • Can I get logs off the hub somehow, if IKEA wants to look into it?

Firmware is 2.975.4 and Matter controller is 26.5.0 if that helps. Thanks!


r/tradfri • • 5d ago

SUPPORT (ONGOING) Kajplats E26 1600 lumen Apple Adaptive Lighting Issue

3 Upvotes

Hi all,

Scratching my head here. I have four IKEA Kajplat E26 1600 lumen bulbs connected directly to Apple Home (Matter/Thread) with Apple TV 4K 2nd Gen as the Thread border router. When I turn any of these bulbs on and select a specific color like Daylight (ie Apple Adaptive Lighting is OFF), these bulbs will not hold the setting. Within as little as a minute and as long as a couple of hours, they will eventually switch Apple Adaptive Lighting ON. Since they are in the basement, trying to keep it as bright as possible down there which is why I want the Daylight color. I have no automations or scenes set and this issue does not seem to be happening with Kajplat E26 1100 lumen bulbs of which I have several.

I'm assuming at this point that it's a firmware issue specific to the 1600 lumen bulbs or something specific to Apple Home software (but only with these bulbs). Throwing this out there to see if anyone else either has this issue or can help me replicate it.

Thanks for any insight here. Appreciated!


r/tradfri • • 5d ago

NEW 2026 PRODUCTS Kajplats CWS bulbs: jarring colour transition at 2100 K

1 Upvotes

The new colour Kajplats bulbs support colour temperature settings between about 1800 K and 6500 K.

At 2100 K I see a sudden, jarring transition in the colour. Just above this threshold, they are a saturated, unpleasant yellow colour with a very slight green tint. Below 2100 K, they are a more pleasant warm orange colour. The switch between these two occurs suddenly at 2100 K.

Above 2100, the colour does change smoothly and the unpleasant feel is gone by about 2400 K.

Do other see this too? Is it a firmware bug? A hardware limitation?


r/tradfri • • 6d ago

SUPPORT (ONGOING) I have to reset my hub every single day

Post image
5 Upvotes

It worked fine for a few weeks, but now every single day it says that it can’t connect despite the hub showing as active/no issues by the indicator light.

No internet issues or power issues. It’s not getting accidentally bumped or knocked out of place.

Support had very little to say, just kept giving me instructions on how to reconnect it but won’t tell me how to stop this from happening.

I’m about to throw this hunk of junk out the window 😭


r/tradfri • • 6d ago

NEW 2026 PRODUCTS Limited options for scenes (window sensor and radiator thermostat)

3 Upvotes

Dear Fellow Enthusiasts,

I am currently exploring the use of Liljebagge thermostats at home. As a side-note, I will say this has been the most troublesome to really implement in a good way. Lots of performance issues and weird behaviour, but I am slowly getting my first pilot install of one unit to work as intended.

I wanted to get Liljebagge to make a very specific scene:

Set to 21 degrees.
IF window = open, THEN set Liljebagge to 8 degrees
WHEN window = closes, THEN WAIT 10 minutes and set Liljebagge to 21.

However, the scenes don't really allow the timed intermission/break. As such, it is:

WHEN window = closes, THEN Liljebagge to 21.

This is not desirable from an efficient heating perspective.

I tried only using the window open to the put a timer on returning to heat, e.g. it would always only start heating 20 minutes after the window had been opened, regardless of when and if it was closed. This raises a lot of other issues though.

Is the IKEA home smart app simply too limited, or should I move to an open source home automation system to make scenes like these?

Thank you for your time.,


r/tradfri • • 6d ago

SUPPORT (2026 PRODUCTS) Issues with HUB and Overall IKEA Smart Devices

6 Upvotes

Hi, I have a lot of issues with the Dirigera HomeHub.

I have it connected via Ethernet to DECO BE65, very often, the buttons are not responding, and the hub keeps being inaccessible via the app. Often I have to reboot everything just to be able to dim or turn off the devices via the IKEA buttons. It is honestly starting to be extremely annoying. Is there a way around this, please? Any help?

The household is running on 2gb Optic Fiber internet - everything worked fine before Matter was integrated - > Ever since, there are so many issue I have no idea how to cope with this...


r/tradfri • • 7d ago

SUPPORT (2026 PRODUCTS) Liljebagge overheating

10 Upvotes

I recently encountered an issue with a Liljebagge thermostat, where it didn't close the radiator valve properly, and the room heated up significantly.
First I thought it was a bad install, so I carefully reinstalled and recalibrated the thermostat, and it was good for a few days but today it happened again.

On the graph you can see a dip in temperature, that was when I opened a window, then the temperature started to rise, but it didn't stop at the set value.
After the first event I set an alarm in Home Assistant for a temp. overrun, and it notified me so I went and reset the thermostat, that's when the temperature started to dip again.

Some info:

  • I have two units, only one of them produced this issue so far.
  • The radiator valves are brand new, the thermostats screw in directly, no adapter needed.
  • Resetting the thermostat solves the issue for a while, but as I said above, it came back.
  • 1.1.6 firmware

Any ideas on what to try?