r/vintagecomputing • • 12h ago

Little IBM 729s (Designed by me)

Post image
514 Upvotes

r/vintagecomputing • • 9h ago

One byte of RAM from 1946

Post image
372 Upvotes

r/vintagecomputing • • 16h ago

Found this in a house that a friend just bought, anyone know anything about it?

Post image
306 Upvotes

r/vintagecomputing • • 19h ago

Sound Blaster Pro 2.0 (June 1992)

Post image
266 Upvotes

One of the first cards with the Yamaha OPL3. Very useful for retro builds, probably the best-supported card until 1994. The CT1690 is rarer than the CT1600 and has a Sony CD-ROM controller. #retrocomputing #soundblaster #dosgaming


r/vintagecomputing • • 9h ago

This would have been a decent little Mac in 1993

Post image
125 Upvotes

r/vintagecomputing • • 14h ago

I finally have a fully working Macintosh SE! :D

Post image
117 Upvotes

I've had this little guy in storage for a very long time after buying it for just over £80 almost a year ago. It came with a lot of stuff, including it's own original Apple branded bag, and it was stored in a loft for I believe 30+ years. It didn't need much in the way of help, but the HDD was not happy as the OS would boot, but then give me an error. Fast-forward to now, and I finally have it working, and I am over the moon with how well this little survivor has held up! :D


r/vintagecomputing • • 23h ago

Today I sold my memory modules from 80s.

Thumbnail
gallery
95 Upvotes

back in time i was used them in my 286 and 386 pcs..


r/vintagecomputing • • 10h ago

IBM Ram Card Identification

Post image
66 Upvotes

I was recently given a PS/2 Model 60. I'm just beginning to learn about it. I pulled a ram expansion card and searched the model number and I can't seem to find anything matching this exact number. It appears to be 90X8163 and populated with 2mb memory. I'm mainly curious if it's anything special.


r/vintagecomputing • • 8h ago

Cool screenshots from TheProperPeople new vid

Thumbnail
gallery
49 Upvotes

IBM million dollar office complex


r/vintagecomputing • • 16h ago

The Toshiba Satellite 335 CDS

Thumbnail
gallery
29 Upvotes

If you worked in any corporate environment in the late 90s, these would be on of the laptops you would see everywhere. With its chunky brick design, Pentium processor and many ports this would have been a laptop for offices all over the world. This model only comes with a dual scan and not an active matrix though. This laptop still has an amazing battery life and works on battery, though it was dead at the time of filming.


r/vintagecomputing • • 6h ago

One bit of memory: tube flip-flop circa 1956

Post image
18 Upvotes

A flip-flop circuit can hold one bit of memory. You can build one with two transistors, but before the transistor they were built in vacuum tubes. It's a metal shroud around a glass tube.


r/vintagecomputing • • 16h ago

The Toshiba Satellite 335 CDS

Thumbnail
gallery
9 Upvotes

If you worked in any corporate environment in the late 90s, these would be on of the laptops you would see everywhere. With its chunky brick design, Pentium processor and many ports this would have been a laptop for offices all over the world. This model only comes with a dual scan and not an active matrix though. This laptop still has an amazing battery life and works on battery, though it was dead at the time of filming.


r/vintagecomputing • • 20h ago

Do you guys know if there is a compiled list of parts to build the "best" computer for each era? (Win3, Win95, Win98, WinXP)

8 Upvotes

Sorry if this has been asked before.

I know windows 3.1 era is usually something like i486DX-66MHZ or the AMD 100MHZ version. Win95/98 era is usually a Pentium III or something. Stuff like that. I don't remember much about motherboards or GPUs of these eras anymore...

It would be cool if I had a decent starting point to start building my "dream" rig for each era.


r/vintagecomputing • • 8h ago

Evolved the v90d softmodem into a dial-up sip service

4 Upvotes

I'd built firmware that turns a single Grandstream HT802 into a dial-up box, but firmware for one box isn't much reach. So I pulled the modem out into its own library and put it behind a SIP server, tuned for everything from Bell 103 up to V.92, including US Robotics x2 and K56flex. Any ATA works (HT801/HT802, Linksys PAP2T, Cisco SPA112, Obihai OBi200): make an account, get your SIP and PPP details, and dial in. There's also 1-800-BBS-DIAL, a menu of 1000+ telnet BBSes, and per-board numbers.

HT802 firmware: https://github.com/georgica/v90d
v92 softmodem library: https://github.com/georgica/libv90modem

Speed, with real numbers: this reaches true V.90/V.92, over the internet, not just on a LAN. My own test over Starlink (not a gentle link) trained at 53333 down on both V.90 and V.92 (V.92 up 38666, V.90 up 28800), with zero retrains and zero late frames, each call under 1% of the server's CPU. An 80 ms jitter buffer soaks up Starlink's 7 to 15 ms jitter and the path stays clock-locked, which is exactly what killed 56k on the old modem-over-VoIP setups. Older modems connect all the way down to Bell 103. For best results use G.711 (ulaw), with echo cancellation and silence suppression off.

Project can be found at: https://netstalgia.online/


r/vintagecomputing • • 15h ago

vintage IBM parts from 70s and 80s. I decided I want to give to a museum .

4 Upvotes

Hello! I have a handful of very collectible IBM parts that I was thinking of selling one day but I actually hate making money and have zero self interest. I think I should donate them. Does anyone know of reputable places to donate such things that could better society not just my wallet for a month?


r/vintagecomputing • • 2h ago

Directv hacks

Post image
3 Upvotes

Some hardware from back in the day. You're seeing two card readers and un Loopers and two cards for SLE emulators.


r/vintagecomputing • • 14h ago

Charmed 1x06 (1998) with a Presario 3060 showing a Windows 95 desktop and a Sony Vaio 505 series notebook with a MacOS-like UI in Prue's Buckland's office (played by Shannen Doherty)

Thumbnail
gallery
2 Upvotes

r/vintagecomputing • • 17h ago

Looking for the best means to off-load my father's old computer/server parts.

2 Upvotes

My father passed away a few years ago and we've been trying to go through his stuff. He used to work IT in the 90s/00s for a local university. As they upgraded systems or got donations they didn't need, he'd bring stuff home. There's a lot of stuff, some that I don't even recognize since I'm pretty sure a lot of it wasn't sold at the consumer level.

The other downside is most everything was store in the the outbuilding garage which itself isn't in a good state. Leaking roof and pests infestations. Some stuff in one corner looks perfectly fine while other stuff in another corner looks completely ruined.

I would prefer not taking everything to e-waste if there might be people who would be interested in it. But the stuff has also been being held onto for up to 30 years and he didn't seem to know what to do with it and we'd like to reclaim the space.

edit: I'm located in Western Washington State USA, North of Seattle.