i bought a blank bridge and carved it myself using various tools i bought on aliexpress.
Just to give you a more background because some of you guys are spewing random things
- I used Aubert Mirecourt Luxe so no.. the wood quality is not poor
- I used a caliper to measure all the dimensions. so no the bridge is not too thick
crown: 1.3mm
heart area thickness: 2.5mm
kidney area thickness: 3mm
feet: 4.2mm
- I used a string template so no the string arent in the wrong height.
--
What could be wrong.
- the bass feet is 100% in flush in contact (I did a human hair test where I tried to get my hair beneath feet from all sides. a human hair 50micrometers and the hair didnt pass thorugh on the bass feet side. The treble foot side, around 3% of the edge, the hair was able to get underneath. Hmm i wonder if this is a problem. in contrast, i tried it with a horse hair (150micometers), the horse hair was unable to get underneath the feet from any angle.
I also tried a light test, no lights came through. So if there are gaps, it is smaller than 50micrometers.
-the curvature from A to E is wrong. While sanding the bridge, i accidentally shaved off more than I should have but the string height is all correct. I think this could be jus a cosmetic error