r/weaving • • Apr 03 '24

Tutorials and Resources Visit Our Wiki!

78 Upvotes

Hey, weavers! We have a huge knowledge base that our users created over the years - it has some truly valuable resources. Check it out!

Weaving Wiki


r/weaving • • 22h ago

Help Native woven tapestry?

Thumbnail
gallery
30 Upvotes

Hello all, I am completely lost for what these are. They appear to be handwoven Aztec/Central American/native tapestries but I’m not sure. They are the same design on the other side. They are roughly 29” by 48”. Also I think it’s wool, because it has a thick and almost rough texture to it. Any help is greatly appreciated!


r/weaving • • 1d ago

Work in Progress Reload

Post image
19 Upvotes

Time to reload the shuttle and continue weaving. Almost fourteen inches of fabric on that first shuttle. Seemed to be the right amount to throw across the shed when full.


r/weaving • • 2d ago

Finished Project I decided to turn a small children's weaving loom into a miniature warp-weighted loom to experiment with a tablet-woven starting border.

Thumbnail
gallery
349 Upvotes

What fascinated me most was discovering how the weft of the border becomes the warp of the fabric. Such a clever technique! By working through each step, from setting up the warp to weaving the cloth, I've gained a much better understanding of how it all works. Now that I've figured out the process, I feel ready to take on the next challenge: building a full-sized warp-weighted loom!


r/weaving • • 1d ago

Work in Progress Rainbow ragrug

Post image
28 Upvotes

Well what a day it was for me today. But I'm finally getting to start weaving on the rainbow warp. Satisfied with the white fabric strips and the colors that pop.


r/weaving • • 2d ago

Work in Progress Using my hand spun yarn

Thumbnail
gallery
298 Upvotes

I decided to use some of my hand spun yarn to weave up some scarves. Plain weave, 8/2 cotton for my warp at sett 6 epi. This yarn is wool and mostly sport weight. I’m taking a at to softly place the weft to keep things soft and drape well.


r/weaving • • 2d ago

Looms Asked to offer price for 4 shaft Leclerc table loom

Thumbnail
gallery
7 Upvotes

Beginning weaver here! I have used a rigid heddle loom and done some tablet weaving. A lady in my area recently lost her daughter and is selling her collection. I am interested in this loom, it seems to come with: 4 shaft table loom, stand w foot treadles, metal heddles & extra, 2 metal reeds, raddle, lease sticks, assortment of bobbins, shuttles, and a book.

She will be donating all proceeds to a locat cat rescue organization. Funds a bit a tight for me, but this is an amazing find for me and I want to offer her a fair price. I was thinking of $400-450 CAD. Please tell me if I'm wildly over/ under!


r/weaving • • 3d ago

Finished Project scarf for a coworker plus bonus cat

Thumbnail
gallery
439 Upvotes

r/weaving • • 2d ago

Work in Progress My very first weaving project - the warp

Thumbnail
gallery
22 Upvotes

I think I should have used thicker cardboard. For now, I think I'll press on. It's probably fine!

I'm following this tutorial on YouTube: https://www.youtube.com/watch?v=7N9xFS-452A

I'm upscaling it cause... well... Why not. I just used the top of a shoe box, next time I'll get something thicker.


r/weaving • • 3d ago

Work in Progress last scarves before moving on to other things!

Thumbnail
gallery
66 Upvotes

making matching scarves for me and my boyfriend. weft is Madeline Tosh ASAP and warp is Malabrigo Vientos 063 Natural


r/weaving • • 3d ago

Finished Project Log cabin scarf completed

Thumbnail
gallery
296 Upvotes

Completed the log cabin. A quick weave. I think it has become one of my favorite woven items. Super soft and colors are lovely.

Rigid heddle. 10 epi. Berroco Super Alpaca in black and denim, size 4.


r/weaving • • 3d ago

Work in Progress Spreading the warp threads

Post image
27 Upvotes

So I used this neon green macrame yarn to spread my warp bouts even to get the total width. No floats no threading errors so now it's time to get down to some weaving. Tension looks good all the way across.


r/weaving • • 3d ago

Discussion Degrees, Educational Programs, Workshops, Residencies, etc. for Weaving?

12 Upvotes

Hi! So far, I have been learning to weave using online resources and books, such as Rebecca Mezoff's material. However, now that I'm getting to know the art form and I have really started to fall in love with weaving, I'd love to find more immersive, in-person opportunities to study weaving.

So I'm hoping that others here will share their knowledge of degree programs, residencies, workshops, etc. that offer weaving education.

I am aware of the Virginia Commonwealth University's degrees in Weaving/Fiber Arts.

I know that Penland School offers some weaving courses.

Obviously local guilds offer courses as well.

What other programs, residencies, and educational opportunities exist out there?

If it matters, I live in the United States and I am primarily weaving tapestry.


r/weaving • • 2d ago

Discussion Favorite Method for Making Long Warps?(15+ yards)

3 Upvotes

I would like to set up some longer warps for my floor loom, ideally 15 to 25 yards. I have a warping board that will do 11 yards, but I'd like to go longer.

My loom does have a ​back beam with the sectional separators on it, but to warp sectionally, I would have to buy a tension box and a spool rack and all the things that go with that.

I'd be curious to see what others like for long warps - sectional warping with a tension box versus using a warping reel or wheel. Specific product recommendations would be good too. Thanks!


r/weaving • • 3d ago

Discussion Is it possible or smart to weave multiple inkle bands on a floor loom?

5 Upvotes

lol i have no idea why i am thinking about this, but i was looking into inkle band weaving and already have a floor loom and it seems so silly to weave just one little band on my HUGE floor loom. has anyone ever woven multiple bands at the same time across the width with multiple shuttles?


r/weaving • • 4d ago

Work in Progress Tied on

Thumbnail
gallery
110 Upvotes

Well finished tying the warp to the apron rod. Should be able to even out the warp tomorrow morning and begin to actually weave finally. 😂 It's a process that's for sure. In front of the reed and behind the heddles.


r/weaving • • 3d ago

Help EPI too low?

Post image
19 Upvotes

I'm very new to weaving, and I'm just getting started on my second project. I am trying to do a plaid twill pattern on my 4 shaft loom. Does it look like I have my warp ends too far apart?

My reed has 8 dents per inch, and I thought that would work for my materials, but after starting, I'm second guessing myself. I would appreciate any friendly advice. Thank you in advance:)

Edit: I'm using a wool/alpaca blend that I thrifted! It's intended for knitting, so it's marketed as fingering weight yarn


r/weaving • • 4d ago

Work in Progress Tied on

Thumbnail gallery
8 Upvotes

Ready to almost start weaving.


r/weaving • • 4d ago

Help The guild's miscommunication leads to an expensive mistake

Thumbnail
gallery
179 Upvotes

UPDATE: We took a decision for now to thread every other inch of the warp, and once the first batch is completely woven, we'll set up the second half of the warp, keeping the 12 epi and not wasting the work already done.

Thanks all for all the great questions and advices!

********

Hi weavers,

I am part of my local guild's project planning comitee and we ran into a pretty expensive pickle this week. (Apologies in advance as english isn't my first language and I'm not sure of all the technical terms)

This was supposed to be a fluffy throw blanket, in some gorgeous thick 2 ply wool. It was only dicovered after almost 3/4 of the rolling was done that the density accidentally doubled. A miscommunication happenned somewhere in the process, between the choice of the pattern, the technical adjustments, the purchase and the rolling, a project that was supposed to be 12 epi is now 24.

Given the density of the yarn, it feels like it will be impossible to weave, and will likely result in a rigid plank of wool. I even doubt the reed would accomodate two threads per dent. The issue was only raised when the team was trying to fill the last spaces and the bulging of the cramps around made it very difficult to roll the 50 ish yards as planned.

In over 100 years of combined weaving experience, this is the first time we're met with such a problem at this late of a stage, and we're not really sure how to proceed.

Suggested solutions so far:

- Try to weave it anyways as is

- Thread only every other cramp (#2, #4, #6...), following the correct threading pattern, knowing that the colours won't match. When the even cramps are empty, thread the other half (1, 3, 5...) of cramps with the same pattern, knowing again the colours won't match.

- As above, thread only the even number of cramps, but thread it 1-2-3-4 all the way and forget about the pattern or the colour position. Repeat with the uneven number of cramps.

- (the solution we're desperatly trying to avoid) Undo all the rolling done somehow, I don't know how we would keep the tension even, or if we could even hand roll all the threads individually to reset them with the correct epi... remember, over 50 yards...

- Scrap it all, eat the cost and start again.

Please let us know what you think would be the best move! Thank you so much in advance!!

Also, just so we feel less alone in this absurdity, what's the worst weaving mistake you've made?


r/weaving • • 5d ago

Finished Project Fun exploring: punch needle on a woven piece

Thumbnail
gallery
138 Upvotes

I've been thinking about how I could use my loom in ways other than simply weaving pieces that I later join together to make something else.

I mean, I love making squares as modules, but sometimes I feel I'm getting a bit too comfortable doing the same things over and over again. So I started wondering: what if I treated the woven piece as a canvas instead? What other fiber techniques could I combine with weaving?

My first experiment was with punch needle. I'd been curious about this technique for a while, and I thought it would be fun to try it directly on a piece woven on my loom.

I had absolutely no idea whether it would work. I just grabbed an old punch needle, some stash and started experimenting.

There was quite a bit of trial and error, a few unexpected challenges and some interesting discoveries along the way. Hopefully, I managed to create some raised designs on my woven pieces!

This is actually the first of four experiments I'm planning to share, exploring different ways of combining fiber techniques with loom weaving.

I wrote about this first experiment here.


r/weaving • • 5d ago

Finished Project My first post here

Post image
133 Upvotes

I weave on tapestry looms, inspired by the landscapes and skies of the Rocky Mountain. We have amazing sunsets here.

I’m pretty proud of the gradient I achieved in this one


r/weaving • • 4d ago

Looms Where to start?

Thumbnail
gallery
51 Upvotes

Long story short I have never actually weaved and my husband surprised me with a loom (I think it’s a Nilus) I would love any advice, recommendations, or pointers as I start on my journey- currently feeling a bit overwhelmed


r/weaving • • 4d ago

Work in Progress Rainbow warp

Post image
38 Upvotes

Well finally have the warp wound onto the back beam. Will start tying onto the front apron rod tomorrow morning. Using 8/4 cotton rug warp with a sett of 10 epi and 12 epi combination for a total width of 30 inches. Going to use white cotton sheets for weft. Fabric strips are cut 2 inches wide and going to use a fabric knot to attach them. The total length of warp is 4.5 yards and should get two good size rugs.


r/weaving • • 4d ago

Help Should I get this?

Post image
25 Upvotes

I have the opportunity to get this loom for not much, but i've never done weaving aside from the little cardboard craft. Is this ok for beginners to just go over and under or is this overkill 😆 it's such a good deal and i got a bunch of yarn sitting around.