Hi everyone,
I'm a 60-year-old British cycle tourist riding from Dalaman, Turkey, through Greece to southern Italy on my Bombtrack Arise Tour.
Unfortunately, I've experienced a serious rear-wheel problem. Several spokes became completely loose, predominantly on the non-drive side. A mechanic retensioned the wheel, but after only 25 km the spokes started loosening again.
I've now found a helpful mechanic in İzmir who has inspected the wheel. Both the rim and hub appear to be in excellent condition, and we've decided to completely rebuild the wheel with new spokes and brass nipples.
Wheel specifications:
- Bike: Bombtrack Arise Tour
- Rim: WTB ST i19 TCS 2.0, 700C
- Hub: Bombtrack Arc, 12 × 142 mm
- Spokes: 32, three-cross
- Replacement spokes: Sapim Leader 2.0 mm, straight-gauge
- Measured spoke lengths: 290 mm / 292 mm
- Nipples: New brass
- Total loaded bicycle/rider weight: approximately 145–147 kg
Here's where we need help.
My mechanic has a KRSEC K-9 spoke tension meter, but we haven't been able to confirm the correct manufacturer conversion chart for 2.0 mm round steel spokes.
We believe the WTB rim has a maximum spoke tension specification of approximately 110–120 kgf, but we'd like to verify the correct building targets for this particular wheel.
Could anyone with professional wheel-building experience help us with:
- A verified KRSEC K-9 tension meter conversion chart.
- Suitable drive-side spoke tension for this WTB rim.
- What non-drive-side tension we should expect with the Bombtrack Arc hub.
- Any particular precautions when rebuilding this wheel for heavily loaded touring.
If anyone has built this particular wheel, owns the same tension meter, or can point us towards reliable manufacturer documentation, your assistance would be hugely appreciated.
The mechanic is sourcing the new Sapim spokes, so we have a little time to establish the correct settings before he rebuilds the wheel.
I'm determined to get back on the road and complete my retirement ride to Italy.
Many thanks in advance.
John