You can clone the repo and do whatever you want with it. This includes a clone of all threads made from yarisworlds inception to sometime last week when I started cloning the site.
I included the PDF how to guides created by original Yaris World members This includes things like "Yarisworld DIY Manual, v3" and the cruise control installation guide. I also included the Toyota service manuals for the 2007 to 2011 Yaris. though I won't be shocked if I get a copyright strike for that at some point lol
I have a clone of all the images hosted on Yarisworld and external sites, but I only included compressed images from the DIY guides since those are the most important. Some of the images led to dead sites, and I was able to recover some of them them using the Wayback Machine. Long term I may include a version of this archive site with all images I archived. But for now im keeping it simple due to size limitations on github.
Fit super well! Even had a little extra width and length to roll out the rear and protect the body of the car when putting things in/taking things out. Found here: https://a.co/d/07myW7Bi
Habe einen toyota yaris 2009 xp9 1.0 vvt-i und seit ca. 19tsd Kilometer summendes Geräusch wenn ich kopplung durchtrete im ersten Gang am meisten hörbar im 2 sehr leise. Uns im 3 Gang nicht mehr hörbar wobei ich sagen muss über die Zeit ist es leiser geworden als ich es das erste Mal gehört habe. Wegen Verdacht habe ich kopplungsatz mit ausrücklager getauscht und getriebe öl mit Additive liquid moly mos2 gewechselt. Es hat sich nichts verändert. Das Geräusch ist auch da wenn ich im ersten Gang Rolle getretene kopplung wenn Motor aus ist.
J’ai acheté une Yaris 3 collection de 2018. Le système multimédia fait très vieillot et il n’y a pas le CarPlay. Existe-t-il des solutions pour ajouter CarPlay et/ou changer le système multimédia vers quelque chose de plus moderne ? Sachant que je ne suis pas du tout bricoleur.
Just recently got a 2009 Toyota Yaris off a guy a few days ago. It seems to be in fairly good condition, but has a faint humming sound near the front of the wheel along with a funky smell coming out of the vents. Does anyone know what that could be? Broken part or something i should be worried about?
Noticed my valve cover was seeping out a decent amount of oil so i decided to it was time to R&R the gasket. I started looking up prices for parts and couldn’t convince myself to pay $184 + Ca Tax for this part. Started looking for other alternatives and found this part for 10% of Toyotas price. Not sure if what I did was the right move? BUT needless to say I’m going to monitor oil levels daily and inspect for seepage.
I will say the replacement part was actually pretty damn good quality. I bought 3 just in case it was too long or short and to my surprise it fit like a glove and didn’t fall out when I rotated it over.
I stumbled across this complete 5-color mini Yaris set at a 2nd-hand toy shop in Japan, still sitting in its original dealership display stand! I screamed to my wife when I saw it.
They're old promo giveaways from Netz Toyota back around 2005 when the pre-facelift XP90 Vitz (Yaris) first came out. They work as both pullback cars and LED headlight keychains.
Somehow after 20+ years, every single LED still lights up😮
I missed my Yaris so much since I sold mine. Still can't believe I got so lucky to find those old toys!
On my 08 liftback with ~260k miles there is an occasional clunking when turning over an incline from the front left. My sway bar end links, control arms, struts, and tie rods have all been replaced or have been confirmed to not be the issue by my trustworthy mechanic. I asked him about the sway bar frame bushings and he said it wouldn't be worth replacing because how expensive it could get with lowering/dropping the subframe.
I live in the rust belt and have typical rust for my mileage. Nothing structural or near requiring getting rid of the car.
Does anyone have similar experience with this, do you think it's worth fixing, and what min/max prices should I look for to get this fixed? Does it become a safety issue, and how soon if so? Or is it just the annoying clunking? Thanks for any advice.
Piston soak was performed with Berryman’s B12 less then 3,000 miles ago. A substantial amount of carbon was cleared from the piston following the soak.
New spark plugs were installed; the image shows less than 3,000 miles of use for reference.
All four fuel injectors measured 12.2 ohms of resistance and produced a normal ticking sound with a stethoscope. All four cylinders showed roughly 200 PSI during the compression test. Swapping the ignition coil from cylinder 1 to cylinder 2 left the P0301 code unchanged.
Valvoline Restore and Protect has been added during the last three oil changes at 4,000-mile intervals along with a fuel injector cleaner. The cause of the persistent misfire remains unclear; perhaps oil is passing the piston ring or carbon on the valves is contributing 🤷. I am open to possible solutions to prevent the P0301 trouble code.
recently got my 2012 yaris Hatch back. Had about 179k miles on it when I got it, and I was under the assumption it was pretty good on gas, but I am reconsidering it may have some issues that contribute to the mpg
- Tire pressure is good, but I need to get my sensors for my tires replaced.
- Needs an alignment
- When I pump my gas, the nozzle always clicks and stops pumping, and I have to start it again, over and over
- filling my tank(in this economy, smh) is like 45 bucks
-on a full tank, I can go about 230 (354km for the overseas folks)
give it to me straight doc, should I take my lil yaris to the shop? what could be wrong if anything?
Hi all, is there a way to confirm if a child's car seat with an isofix and leg support can be installed safely in the Yaris 2009. My husband was told in passing that the floor compartment might be unstable and might not be able to withstand the pressure (in a car crash for instance). We tried emailing Toyota, but they directed us to a local seller but we have not heard anything from them.
Hello everyone, couldn't find what I'm looking for.
I have the 2025 Toyota Yaris 1.5L Hybrid, it came original on 16" wheels. Tyres 195/55/R16 and after some googling and getting to wheelsize website, I believe these are the OEM wheels it came on 6Jx16 ET50 with 5x100.
Are there any good wheels for it ? Anybody has any experience with other offsets ? I'm looking for a nice set, I have both winter and summer tyres. So the 195/55/R16 needs to fit on the new wheels.
Hi, I've had this 6 year old bad boy for a while now (1.5L petrol (not hybrid), 6 speed manual, 92kW - 125hp):
Winter is coming, and recently the morning startups are not very smooth in the last couple of weeks, even though the minimum temperatures are currently only around 0-5 celsius). I suspect the battery is not in a good condition. We measured the battery condition with a device:
As far as I can see, it can still be used if we recharge it, but it is in not a very good condition, so I'd prefer playing safe, and simply just swapping the battery for a new one. The question is can I do it at home? Is there something I should be aware of when swapping the battery? Will the infotainment system and other electronics in the car tolerate simply just removing the battery and putting in the new one (as this would cause a period of time without power supply)? Or should I rather go to a mechanic and have them swap it for me?
I'm thinking it might be a blown fuse since it was working fine for a while but all of a sudden stopped working. No noise when I press down on the steering wheel too. No airbag light or anything like that as well.
Any thoughts on what it might be and whether I'd be able to DIY the fix?
Hey y'all I recently got myself a 2004 Yaris Verso 1.3, automatic, and I am really happy with it.
As I had a long drive ahead of me, one of the first things I purchased was a bluetooth adapter to plug into the back of the headunit to have bluetooth and it's working great, even handsfree calling is decent.
But once in a while I wish I had an Android Auto capable head unit. Not a must, but just a thing I wish I had. There are plenty available for the bottom part of the radio and CD player, but it feels way too low for actual information to be displayed. Instead, I'd love to have one to replace the top console. This bit isn't really working anymore anyway. Buttons are very unresponsive and the information displayed is not really accurate.
Does anyone have recommendations? There are brackets for 9-inch headunits I've only seen on AliExpress, but I'm uncertain if those fit, because all product photos show the 'pre-facelift' dashboard with round air outlets. Mine has the vertical ones as seen above.
Does anyone have experience with or has installed one of those brackets with a fitting unit? I'm located in Switzerland and could have parcels delivered to Germany or so.