r/4Runner • • 1h ago

🔧 Modifications Celebrated payoff with a couple mods

Thumbnail
gallery
21 Upvotes

Celebrated payoff with a couple mods. I thought I’d do them shortly after I got it but took several years instead. Better late than never.

Can’t wait to show it off to the homies at Costco


r/4Runner • • 20h ago

📸 Photo / Video Survived the i70 apocalypse this morning

Post image
309 Upvotes

r/4Runner • • 34m ago

📸 Photo / Video When you know you know 5th Gen love

Thumbnail
gallery
6 Upvotes

So glad I got another 4runner

Every time I blink there is one or two!!


r/4Runner • • 41m ago

📸 Photo / Video Ducks?

Post image
6 Upvotes

Do 4Runner owners have anything like the rubber ducks.... no. Just this....


r/4Runner • • 20m ago

📸 Photo / Video Ouachita National Forest

Thumbnail
gallery
5 Upvotes

Third annual pre-Thanksgiving trip with my friends.


r/4Runner • • 1h ago

🔧 Modifications Setup to haul skis - OEM vs Ruggedized

3 Upvotes

I'm very new at this, and have searched old posts but still am a bit confused. I see lots of recommendations for the LFD Ruggedized crossbars over OEM, but what justifies the price differential? Ruggedized bars are currently $374 and OEM at $50-100 at different dealer sites

2010 4Runner without 3rd row, planning to mount a cargo box for skis and maybe summer camping type cargo. No plans to get heavily into offloading. I'll happily hear any suggestions.


r/4Runner • • 20h ago

📸 Photo / Video Should’ve done this years ago…

Thumbnail
gallery
86 Upvotes

My skid plate bolts were violated by a shop a few years ago and it’s been hanging on by a literal thread ever since.

Tapped them with an M10x1.25 thread and now it’s more solid than it’s ever been.


r/4Runner • • 18h ago

🔧 Modifications 5th Gen Yaesu center stack

Thumbnail
gallery
60 Upvotes

Installed a FTM-510 with a center stack from Yota Works. My original setup was cut into the OEM panel and this one looks so much better than my original hack job.*

The OEM swivel bracket is a little flimsy but it works. There is a company that sells an aluminum bracket on Amazon and it’s solid.


r/4Runner • • 5h ago

👷‍♂️ Support / Repair Any suggestions on how to remove this bracket? It is what is left of previous owners ladder

Post image
5 Upvotes

2021 venture I believe the bracket is held on with double sided tape


r/4Runner • • 17h ago

📸 Photo / Video first time buying a brand new vehicle!

Thumbnail
gallery
41 Upvotes

drove 4th gen for 11 years. cherished every mile. just got this 2026 TRD ORP. loving it! even how dusty the black gets.


r/4Runner • • 2h ago

👷‍♂️ Support / Repair Cover to cat converter fell off

Post image
2 Upvotes

Hello I think the cover to catalytic converter fell off, seems to still run ok, do I need to replace? 120,000 miles 2014 trail


r/4Runner • • 1d ago

📸 Photo / Video Can't believe I did it

Post image
471 Upvotes

Picked up this bad boy yesterday. It's absolutely my dream vehicle and I am so excited!


r/4Runner • • 1m ago

👷‍♂️ Support / Repair 5th Gen Water in trunk help

Thumbnail
gallery
1 Upvotes

Hey all,

Every time it rains hard, I get a bunch of moisture in the trunk of my 5th gen. I think I’ve finally figured out the culprit, I suspect it’s the inside trim around the rear window. Sunroof and hatch drain plugs are clear, the rubber around the hatch seems okay. The only place I’ve found moisture is near the window seal.

There are so many posts online about this issue but I’ve been having a hard time finding actual tips and tutorials to fix this. Does anyone have any tips or guidance on how I can fix this? Or a part number? My car smells like shit pls help, thank you


r/4Runner • • 16m ago

👷‍♂️ Support / Repair What would cause this scraping?

Post image
1 Upvotes

What would cause the metal cross holding my pads rub on my rotor? The quality of the pic is not the best but you can see it has scrapped just on the right part of the rotor. It's a 3rd gen 4runner with TBU. This is on the driver side and passenger side has no rubbing.


r/4Runner • • 17h ago

📸 Photo / Video 15.88 seconds @ 89MPH 1/4-mile

Thumbnail
youtube.com
21 Upvotes

"bone stock on mid grade gas."


r/4Runner • • 21h ago

Price Check Price check 2012 4Runner, 350k km, $10k

Thumbnail
gallery
36 Upvotes

I've got the chance to buy a 2012 4Runner for $10k. Built for overland travel (and previously used by the last owner including fording a few streams.) Bush bumpers, winch, armour underneath. 350k km. All four brakes redone by a shop 1 yr ago, calipers, pads, rotors. Full leather interior, pull out rear deck. Spare tire mounted on the back.

Crawling underneath and it seems to be solid, I poked into the frame, above where the spare tire sits, etc. Surface rust but nothing deep. No visible rust on the body. Has a engine snorkel, lift, lights, and likely some other stuff I can't see from photos.

The bad? Unknown recent history as the owner is deceased. The interior has mold throughout, so would need a full clean and detail with ozone. The rear window motor is dying. Wasn't able to test the winch. And it's got 350,000km on it

They are asking $10k. If I buy it, I'd be doing all the fluids, full detail with ozone, all filters, and the rear window motor. Potentially tires depending on their age.

Is it worth the price, given the age, mileage, and other issues? It did start up and the engine ran quietly at idle with a new battery.

It's a 2012. unknown trim. 4.0 V6 engine with the 5 speed automatic. Location is in Canada


r/4Runner • • 6h ago

👷‍♂️ Support / Repair Anyone Replace 5th Gen Axle Seal?

2 Upvotes

2018 4runner, 165k miles

Hey y'all, last week observed my rear passenger brake assembly soaked in oil. I suspected a bad caliper and replaced, but it turned out not to be the caliper leaking. Did some more research and found the axle seal to be the next most likely culprit.

Purchased two seals and replaced both sides. Passenger side rear seal had a visible tear (the leaking side). When I pulled the driver side it was intact but tore upon inspection. The original leaking side is still leaking after replacement.

Think this was a bad install or something else? Looking back on the install I did not grease the seal with anything except giving it a smear of diff fluid.

I watched the car care nut video on the repair but I guess it went awry somewhere. Has anyone got tips from their own repair?


r/4Runner • • 4h ago

❔ Aftermarket Product Advice / Recs Front License Plate Mount?

1 Upvotes

Looking for a front license plate mount for my 2022 4Runner that doesn’t require me to drill into the bumper. Any leads would be appreciated. Thanks!


r/4Runner • • 11h ago

👷‍♂️ Support / Repair Is this the style lug nut I need for a 2021 venture edition with the OEM TRD rims

Post image
0 Upvotes

r/4Runner • • 1d ago

🎙 Discussion Hydrophobic coating for sensors?

7 Upvotes

Okay, loving my 2026 4Runner that I’ve had for 3 weeks so far except all the freaking nonsense that happens when the sensors get covered in snow while driving. I live in snow country and on my first snowy drive home one would have thought the world was ending with all the sensors freaking out. 🤣 I’m like chill, it’s just snow.

So, what have y’all found to be a good solution?

My car nerd extraordinaire kid is pitching me in ceramic coating for the whole car. I’m not opposed, but I had ruled it out previously - before the snow. But I’m also not wanting to drop $800 if it’s not a solid solution. I’m very pragmatic, like if a can just put some windex on it, cool let’s go. I just need a solution that doesn’t involve pulling over to clean them off or stopping to turn off all the sensors every time it snows.

I rarely find substantial design flaws in any of our now 7 ‘yotas at the house - well, except the eliminated “oh shit” handles on the 3rd gen Taco - but this seems to be one.

All ears.


r/4Runner • • 23h ago

👷‍♂️ Support / Repair 5G Brake Booster Accumulator Pump

3 Upvotes

I have recently noticed that I hear the brake accumulator pump cycling every 1 or 2 depressions of the brake pedal. Before now, it was obviously much less noticeable and would only occur with startup and every several brakings.

Worried this may be a sign of the accumulator pump on its way out. 2015 SR5 with 194k miles, so if that’s the case, I guess I’ve done alright.

Curious for opinions on this from those who’ve experienced it/had the brake booster accumulator system replaced on their 5th gen 4Runner—it sounds like it’s typically a costly job? If it is the pump going bad I’m hoping I have some time to plan for the replacement, as I was already planning for a radiator/water pump/thermostat job 😓


r/4Runner • • 1d ago

🎙 Discussion 2016-2017 4Runner Recall: "vehicles equipped with certain Takata front passenger air bag inflators installed as original equipment or as replacement parts under a prior recall. The inflators may rupture due to propellant degradation"

Thumbnail
nhtsa.gov
21 Upvotes

An inflator rupture may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

NHTSA ID Number: 26V748000

Manufacturer Toyota Motor Engineering & Manufacturing

Components AIR BAGS

Potential Number of Units Affected: 314029

Summary

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2010 Lexus SC430, 2011 IS250, 2017 GX460, 2003-2008 Toyota Corolla, 2005-2006 Tundra, 2005-2007 Sequoia, and 2016-2017 4Runner vehicles equipped with certain Takata front passenger air bag inflators installed as original equipment or as replacement parts under a prior recall. The inflators may rupture due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Remedy

Depending on the vehicle model, dealers will replace the front passenger air bag inflator or the air bag assembly, free of charge. Owner notification letters are expected to be mailed beginning December 28, 2026. Owners may contact Toyota's customer service at 1-800-331-4331. Toyota's numbers for this recall are 26TB25, 26TA25, 26LB11, and 26LA11.

Credit: National Highway Traffic Safety Administration


r/4Runner • • 1d ago

🔧 Modifications 3rd set of tie rods in 19 months. Let’s see if Apex can survive longer than OEM.

Thumbnail
gallery
64 Upvotes

r/4Runner • • 1d ago

👷‍♂️ Support / Repair Parking brake clip rubbing on back of hub

0 Upvotes

Ok so here’s what happened.

I did a full brake/rotor change on my 5th gen. New rotors new pads the works. In the process the drivers side rear caliper was replaced. When I did both rear brakes, I spun the spikey wheel to loosen the parking brake and removed the rotor. When I spun the hub to clean it a spring and retainer clip fell out both times. This pissed me off but I got they reseated and what not. Got everything reassembled and now the driver side rear one is making noise. Why do they just explode!? Also why is it now rubbing? What did I do wrong??