r/4Runner • u/Previous_Mycologist4 • 14h ago
r/4Runner • u/GreatValue_Mechanic • 14h ago
📸 Photo / Video Should’ve done this years ago…
My skid plate bolts were violated by a shop a few years ago and it’s been hanging on by a literal thread ever since.
Tapped them with an M10x1.25 thread and now it’s more solid than it’s ever been.
r/4Runner • u/Human_Trouble_1176 • 12h ago
🔧 Modifications 5th Gen Yaesu center stack
Installed a FTM-510 with a center stack from Yota Works. My original setup was a hack job cut into the OEM panel and this one looks so much better.
The OEM swivel bracket is a little flimsy but it works. There is a company that sells an aluminum bracket on Amazon and it’s solid.
r/4Runner • u/Craddosk • 15h ago
Price Check Price check 2012 4Runner, 350k km, $10k
I've got the chance to buy a 2012 4Runner for $10k. Built for overland travel (and previously used by the last owner including fording a few streams.) Bush bumpers, winch, armour underneath. 350k km. All four brakes redone by a shop 1 yr ago, calipers, pads, rotors. Full leather interior, pull out rear deck. Spare tire mounted on the back.
Crawling underneath and it seems to be solid, I poked into the frame, above where the spare tire sits, etc. Surface rust but nothing deep. No visible rust on the body. Has a engine snorkel, lift, lights, and likely some other stuff I can't see from photos.
The bad? Unknown recent history as the owner is deceased. The interior has mold throughout, so would need a full clean and detail with ozone. The rear window motor is dying. Wasn't able to test the winch. And it's got 350,000km on it
They are asking $10k. If I buy it, I'd be doing all the fluids, full detail with ozone, all filters, and the rear window motor. Potentially tires depending on their age.
Is it worth the price, given the age, mileage, and other issues? It did start up and the engine ran quietly at idle with a new battery.
It's a 2012. unknown trim. 4.0 V6 engine with the 5 speed automatic. Location is in Canada
r/4Runner • u/kieraloo • 11h ago
📸 Photo / Video first time buying a brand new vehicle!
drove 4th gen for 11 years. cherished every mile. just got this 2026 TRD ORP. loving it! even how dusty the black gets.
r/4Runner • u/KickHisAssSeaB4SS • 11h ago
📸 Photo / Video 15.88 seconds @ 89MPH 1/4-mile
"bone stock on mid grade gas."
r/4Runner • u/TrailRebelX • 19h ago
🎙 Discussion Hydrophobic coating for sensors?
Okay, loving my 2026 4Runner that I’ve had for 3 weeks so far except all the freaking nonsense that happens when the sensors get covered in snow while driving. I live in snow country and on my first snowy drive home one would have thought the world was ending with all the sensors freaking out. 🤣 I’m like chill, it’s just snow.
So, what have y’all found to be a good solution?
My car nerd extraordinaire kid is pitching me in ceramic coating for the whole car. I’m not opposed, but I had ruled it out previously - before the snow. But I’m also not wanting to drop $800 if it’s not a solid solution. I’m very pragmatic, like if a can just put some windex on it, cool let’s go. I just need a solution that doesn’t involve pulling over to clean them off or stopping to turn off all the sensors every time it snows.
I rarely find substantial design flaws in any of our now 7 ‘yotas at the house - well, except the eliminated “oh shit” handles on the 3rd gen Taco - but this seems to be one.
All ears.
r/4Runner • u/Angry_Toydarian • 17h ago
👷♂️ Support / Repair 5G Brake Booster Accumulator Pump
I have recently noticed that I hear the brake accumulator pump cycling every 1 or 2 depressions of the brake pedal. Before now, it was obviously much less noticeable and would only occur with startup and every several brakings.
Worried this may be a sign of the accumulator pump on its way out. 2015 SR5 with 194k miles, so if that’s the case, I guess I’ve done alright.
Curious for opinions on this from those who’ve experienced it/had the brake booster accumulator system replaced on their 5th gen 4Runner—it sounds like it’s typically a costly job? If it is the pump going bad I’m hoping I have some time to plan for the replacement, as I was already planning for a radiator/water pump/thermostat job 😓
r/4Runner • u/DiagonalSandwich • 52m ago
👷♂️ Support / Repair Anyone Replace 5th Gen Axle Seal?
2018 4runner, 165k miles
Hey y'all, last week observed my rear passenger brake assembly soaked in oil. I suspected a bad caliper and replaced, but it turned out not to be the caliper leaking. Did some more research and found the axle seal to be the next most likely culprit.
Purchased two seals and replaced both sides. Passenger side rear seal had a visible tear (the leaking side). When I pulled the driver side it was intact but tore upon inspection. The original leaking side is still leaking after replacement.
Think this was a bad install or something else? Looking back on the install I did not grease the seal with anything except giving it a smear of diff fluid.
I watched the car care nut video on the repair but I guess it went awry somewhere. Has anyone got tips from their own repair?
r/4Runner • u/overworked27 • 5h ago
👷♂️ Support / Repair Is this the style lug nut I need for a 2021 venture edition with the OEM TRD rims
r/4Runner • u/InteriorBlack • 19h ago
👷♂️ Support / Repair Parking brake clip rubbing on back of hub
Ok so here’s what happened.
I did a full brake/rotor change on my 5th gen. New rotors new pads the works. In the process the drivers side rear caliper was replaced. When I did both rear brakes, I spun the spikey wheel to loosen the parking brake and removed the rotor. When I spun the hub to clean it a spring and retainer clip fell out both times. This pissed me off but I got they reseated and what not. Got everything reassembled and now the driver side rear one is making noise. Why do they just explode!? Also why is it now rubbing? What did I do wrong??