r/Acoustics • • Oct 19 '21 Bravo

Best tools & resources for acoustics-related work

158 Upvotes

Here's a list of acoustics tools that I've compiled over the years. Hoping this is helpful to people looking for resources. I'm planning to add to this as I think of more resources. Please comment in this thread if you have any good resources to share.

Glossary of acoustic terms: https://www.acoustic-glossary.co.uk/

Basic Room Acoustics & analysis Software

X-over & cabinet modeling:

Measurement, data acquisition, & analysis tools with no significant coding required

Headphone & Speaker Data Compilation websites that actually understand acoustics & how to measure correctly:

Some good python tools:

Books:

Web resources & Blogs:

Studio Design Resources:


r/Acoustics • • 6h ago

Decided to wrap my duct work

Thumbnail
gallery
3 Upvotes

I was initially thinking about trying to insulate between these 2x2s but the foam insulation was going to be worthless. Hopefully this does something for me. No idea how to tell other than the duct work doesn't ring when I knock on it now. 😂

One thing I hadn't considered until just now is how much weight this adds. It's somewhere around 80-100lbs across about 100 square feet of duct. It's probably fine. 🫣


r/Acoustics • • 23h ago

Weird metallic fast sounding echo

3 Upvotes

I have just finished a 4x3 meter room after extensively researching how to decouple and isolate a party wall... luckily that has worked extremely well and I can't hear someone shout next door. The next issue is that the room now sounds weird (fully plasterboarded and carpetted)

If you clap it sounds like a weird fast resonance buzz. The shape of the room is like a big wedge going from 1 meter at the lowest point to a flat bulk head with spots at around 2.2 meters then up again on the same angle to about 3.8 meters tall... there a staircase that comes into the room, a 100x120 velux and a similar sized window.

I'm guessing the noise is because its being caught up in the high points of the ceiling. I really thought carpet would have helped soften it. It kind of feels like I'm wearing headphones when talking in the room too.

I need to hang curtains and add more furniture but there is already a fabric sofa in the room so getting a little worried that the noise is so weird still.

Any thoughts appreciated! I'll take pics when home tonight


r/Acoustics • • 1d ago

How can I reduce outside traffic noise in my home office?

Thumbnail
reddit.com
2 Upvotes

r/Acoustics • • 1d ago

Hi looking for co-founders or is it even possible?

0 Upvotes

Hi I am 19 and I know no one will take this seriously but I have an idea I wanted to sell noiseless clippers and trimmers and did a bit of research and I couldn't seem to find any. The lowest I could find was around 60dB. So therefore I wanted to ask is it even possible to make noiseless clippers and if so could I get some information from mechanical/acoustic engineers. Like I said I know I am just 19 years old and shooting a shot in the dark but anything that helps I'll appreciate it.

Also If it is possible who do I contact or how do I move further.

thanks in advance.


r/Acoustics • • 2d ago

18Measurement microphone

1 Upvotes

I am looking for a measurement microphone for a PA system. Since my budget is limited, I’ve been considering the Audix TM-1 Plus—has anyone had any experience with it, or could you suggest an alternative?


r/Acoustics • • 2d ago

Moving Blankets to block sound from doorway. Temporary Setup...

0 Upvotes

So, to explain a temporary setup, I'd like to build a frame and attach a moving blanket or 2 to it and be able to put it away when I'm done making my drumming noises.

The plan:

Build a framing system out of 2x4s, Make the framing the size of the doorway (maybe a little bigger as the moving blankets I have are pretty big). I figure I can tack a moving blanket to each side of the frame I make.

Putting this up against the doorway my drums are in and closing the door (leaving the moving blanket frame in the hallway up against the doorway), would this help contain the sound in that room any better?

I really don't want to attach the moving blanket or the framing physically to the wall. I don't want any signs of anything modified for that room in the hallway where I would have visitors. I'd like to keep it maybe behind the door in the room where my drums are at. Then drag it out into the hallway and lean it up against the door in the hallway and close the door and go make noise.

Is this a feasible solution or am I just going in the wrong direction with this? I'm thinking if I put something on the other side of the door, that should cut down the noise a little bit. Not 100% but even if it's 15-20% I'd be okay with that I think.


r/Acoustics • • 2d ago

Looking for Verification/Reassurance on VO Recording Studio Setup Plan

Thumbnail
reddit.com
0 Upvotes

r/Acoustics • • 2d ago

What do you recommend for me to be able to make this room sound better? The kit sounds echo-y.

Thumbnail
gallery
1 Upvotes

r/Acoustics • • 3d ago

Is there an actual Reason Big Ben's Bells are very Dissonant?

Thumbnail
youtube.com
3 Upvotes

Why exactly does big ben's bells not match a pleasant tuning?
Like the Actual Hour bell itself is an E but has a very strong A5 character and very permeating G2 resonance? and the minor third isn't audible at all, does it even exist here? (the tierce). The quarter bells have the exact same problem! and the Westminster chimes "melody" is in F-major while the "big ben" is an e.
For example the nottingham bells, and the peace tower in canada actually sounds tuned correctly.
And even 1870s articles were complaining too.


r/Acoustics • • 4d ago

How Does Noise Cancelling Work? Inside AirPods Pro

Thumbnail
proofscene.com
8 Upvotes

Hey guys thought this might be something the sub would enjoy - I made this interactive 3D model of the Airpods Pro that you can take apart and see how all the parts inside work.

It's a work in progress so happy for any feedback or critique!


r/Acoustics • • 3d ago

How to Soundproof French doors

Post image
0 Upvotes

r/Acoustics • • 4d ago

Soundproofing on party wall in rowhome

Thumbnail reddit.com
1 Upvotes

r/Acoustics • • 4d ago

Acoustic Consultancy

0 Upvotes

hi guys, im planning to start my own acoustic consultancy firm specialising in noise monitoring, sound proofing, vibration monitoring and sound masking. Im seeking for mentors to educate me on the things i would need to know before starting to the business.


r/Acoustics • • 5d ago

Couldn’t get rid of the bed but happy with how my home studio came together. But I have a question

Post image
1 Upvotes

For getting the most out of my space. Is the current mic positioning optimal pointing at the rockwool panels? Or turn it around and position it towards the iMac? I’m assuming I have the best setup possible run.

I know the felt panels aren’t perfect but budget couldn’t allow for full rockwool treatment and they are still better than the crappy foam panels.

To the left there’s a makeshift panel covering the window if that helps.

Also do you ever tilt your mic down to kill more plosives? Or keep it straight on? Just trying to get the most out of my now decently treated space. Thanks :)


r/Acoustics • • 6d ago

Soffit mounting ATC SCM110s

Thumbnail
gallery
197 Upvotes

Converting my guest house into a production suite. ATCs went in the wall yesterday.


r/Acoustics • • 5d ago

Living next to an ASHP compound

1 Upvotes

Hi everyone,

I’m looking for some advice or to hear from anyone who has experience living next to an air source heat pump (ASHP) compound.

A developer is redeveloping a nearby care home and has applied for planning permission to install a compound containing multiple ASHPs and VRF units. The proposed site is right next to our back garden fence, which is only about 10 metres from our house. They have stated they will install an acoustic barrier fence to mitigate the sound.

We live in a relatively quiet suburb (apart from some commuter traffic), so we’re worried about how much noise and disturbance this setup will actually cause especially at night or during colder months when the units work harder. We also use the garden a lot so we'd like to know how much noise we can expect to hear in the garden.

Has anyone lived near a similar commercial setup, and how noticeable was the noise? Also, does anyone have advice on how we can object to the planning application or push the developer to relocate the compound further away from residential boundaries?

Any experiences or tips would be really appreciated. Thanks!


r/Acoustics • • 5d ago

Is this any better

Post image
1 Upvotes

r/Acoustics • • 6d ago

Room in room amends

1 Upvotes

Hello

I have a room, inside a garage with double stud walls, with double layered plasterboard on the inside. It has communicating doors.

However, there is no gap between the construction of rhe studs and one of the walls is coupled/ secured to the party wall or the garage, so I expect quite a bit of sound transmission happens there.

As I understand it these are my options:

  1. start again (last resort)
  2. rebuild wall coupled to party wall
  3. build another decoupled layer inside the room with the correct air gap, but remove the existing plasterboard / drywall from the existing inner leaf.

4)build another decoupled layer inside the room with the correct airgap, but keep the existing plasterboard / drywall sandwiched between (least destructive).

Particularly out of 3) and 4) which would be the best option in my case, in your opinion?

Thanks


r/Acoustics • • 6d ago

How bad do you think the highway noise would be from this house?

Thumbnail zillow.com
0 Upvotes

Doomscrolling Zillow and looking at this property. How bad do you think the highway noise would be from the house? Cheers, audio gang.


r/Acoustics • • 6d ago

How to record acoustic vibrations (structural)?

Thumbnail reddit.com
2 Upvotes

r/Acoustics • • 6d ago

Shared wall townhouse: Will KEF Q Concerto Metas transmit less bass than Klipsch RP-8000F IIs?

0 Upvotes

I currently use 2 Klipsch RP-8000F II Floor standing Speakers with no subwoofer. I live in a townhome and the speakers are set up on the wall opposite of my neighbor. They are about a foot off the wall. I also have noise isolation feet installed at the bass of my stereo speakers (SVS SoundPath Subwoofer Isolation System).

Sometimes when a movie or show puts out low frequency bass my neighbor says it shakes his walls. I understand the sensation it can cause because when there is loud bass from outside we get the sensation that it vibrates in the walls a bit. The construction seems more vulnerable to bass than older apartments I've lived in before.

I have an Onkyo receiver and I've turned the BASS setting down the furthest it will go (-10db). I've also gone into the equalizer and set any band from 100HZ or lower down as much as it can go (-6db). I also keep the volume at a relatively low level - sometimes too low to hear the dialogue clearly. The neighbor hasn't complained since I set the equalizer but that was recently and after testing it a bit, I don't think its making a huge difference because the low frequency bass is still being output.

In doing research online I've come across articles that say speaker size has very little to do with bass transfer. The Kilpsch speakers are pretty large for a home TV set up and have 2 8 inch woofers. I've come across other articles that say speaker size can definitely have an effect. I really just want to have decent sound without much low frequency bass to avoid issues with the neighbor.

I'm looking for advice but my main question is if replacing my setup with bookshelf speakers on stands, something like the KEF Q Concerto Meta Bookshelf Speakers, would make a difference and minimize or eliminate the bass transfer into the wall. I've never had an issue like this when living in apartments where I had a small subwoofer, and Id like to be able to watch TV at a higher volume without bothering my neighbor.

Any advice is appreciated.


r/Acoustics • • 8d ago

The multiphase acoustics of pouring water: how thermal viscosity shifts bubble resonance

35 Upvotes

There’s a well-known psychoacoustic baseline (Velasco 2013, Agrawal & Schachner 2023) showing listeners distinguish hot from cold water pours with ~80% accuracy.

The prevailing physical explanation traces back to Marcel Minnaert’s 1933 derivation for musical air bubbles (𝑓≈3.26/𝑟 in meters). Since water viscosity drops from ~1.002 mPa·s at 20°C to ~0.282 mPa·s near 100°C, turbulent shear in the plunging jet changes dramatically.

Recent preprint work by Bi et al. (2024) indicates hot pours entrain significantly larger air cavities (5–10 mm) compared to cold pours (1–2 mm), concentrating acoustic energy in sub-1.5 kHz bands while cold water produces high-frequency transients above 2.5 kHz.

Wrote a detailed breakdown exploring the candidate mechanisms (bubble oscillation vs air column resonance vs vessel vibration):

https://www.oddlyclear.com/can-you-hear-the-difference-between-hot-and-cold-water/


r/Acoustics • • 7d ago

Will a sound maze make these mofos quieter?

Post image
3 Upvotes

Hey there some of you might remember this photo because I posted quite a while ago now about trying to silence these super loud vents that I'm not allowed to adjust because I live in Sweden and there's some sort of balanced ventilation system.

They are loud as fuck because somebody decided not to choke the air up higher in the building and instead everything is choked back at the vents so it's like a white noise whoosh that nobody wants to fix.

After reading a bunch of your comments I figure what I could do is build a sound maze in front of each of them.... Will it work? From what I'm reading acoustic foam blocks high and mid frequency noise and I don't think this white noise has bass tones..

Any advice would be greatly appreciated and again the offer is open to name a child after you if it works

Thanks!