r/AnalogRepair • • Dec 25 '25

Distinguishing between JIS and Phillips screwdrivers: different symbols

Post image
51 Upvotes

r/AnalogRepair • • Jun 06 '23

Update Introducing User Flairs!

19 Upvotes

It took me a while but I’ve finally gotten around to creating user flairs for this subreddit. You can choose your flair in the subreddit sidebar or, on mobile, using the „change flair“ button beneath the community description. We ask you to choose honestly and pick a flair that fits your level of skill. The following flairs can be chosen by everyone;

Beginner - someone who’s just starting out with repairing cameras and doesn’t have any specialised tools or experience.

Tinkerer - someone who owns a lens spanner and has already disassembled a couple of cameras.

Competent Mechanic - someone who regularly repairs cameras and owns most or all required tools and materials for a proper repair.

Furthermore there are some flairs that can be only assigned by moderators after verifying a user’s knowledge and skill. You can contact the mods to request them. Those flairs are;

Expert (including the field of expertise) - a competent camera mechanic who is especially versed in a specific time period, type of camera, camera brand or type of repair work.

Former Professional Repair Person - a trained professional who used to repair cameras for a living in the past.

Commercial Repair Person - a trained professional who currently offers paid repair and CLA services.

Other custom or ironic flairs, like „I repaired a Zorki once and am proud“ or „Canonista“, can also be requested as long as they aren’t used disingenuously and roughly fit your current level of skill and expertise.

Along with this we also introduce a new rule against clearly bad advice. Since everyone can claim to be a competent camera mechanic, there’s a risk someone who is either malicious or simply doesn’t know anything about proper optomechanical repair might authoritatively suggest a damaging repair method or completely false advice. Those clearly and provably wrong posts and comments, for example someone suggesting to „just spray it with WD40“, can now be reported and will be removed. They may result in a temporary or permanent ban if clearly malicious.
This rule, however, does not extend to techniques, opinions or advice that are uncommon, counter-intuitive or stuff you simply personally disagree with. Please only report unambiguously bad advice.

Happy repairing!

u/Oldico

Edit
Post flairs already existed too but, for some reason, were disabled. I turned them on so those can (and should) now be used too.


r/AnalogRepair • • 27m ago

Camera body Nikon FE shutter won't open 100%, reacts sluggish, mirror sometimes stuck

Thumbnail
gallery
2 Upvotes

Recently got a untested Nikon FE and hoped it would work or be easily fixable.

...nope. It arrived with mirror up in M90 mode. Changing the batteries to a fresh pair of SR44 didn't change anything (metering seems to work though!)

I noticed that the shutter blades looked somewhat oily, so I tried to gently remove it with fuzz-free cotton swabs and a few drops of 99% isopropyl alcohol. After that the shutter would snap back and the mirror would flip down.

unfortunately I am not able to shoot a whole 36 pictures with the mirror / shutter getting stuck again. also the first shutter curtain is never opening 100% (see the first pic above).

What I noticed: When I am using M90 or B mode the mirror gets stuck much more quickly compared to when using the other modes. Also, when taking off the bottom cover I noticed that in M90 the copper (?) arm doesn't snap back after the picture's been taken, compared to 1/125 for example.

Which makes me think that either there is more oil next to the shutter blades in the "rest" position below the viewfinder and/or another shutter-related mechanism is covered in old oils,
making it sluggish?
Have any of you ever encountered this "sluggish shutter not opening 100%" behaviour?

I am a novice to repairing analog cameras and I don't think spending 100-200€ on getting it cleaned and oiled professionally is worth it, as I could probably get a working camera for that price. So I'd rather try as much as I can myself or re-sell it as broken.


r/AnalogRepair • • 3h ago

Camera body Any guides for disassembling a DP-30 for an F5?

Post image
2 Upvotes

r/AnalogRepair • • 35m ago

Rewind problem Lomo lc-a

1 Upvotes

r/AnalogRepair • • 2h ago

2mm lightseal for the back works for Minolta X-700 and XD-7?

1 Upvotes

It's very hard to find 1.5mm lightseal in my area. Can I replace the old seal with 2mm lightseal? For the top and bottom channel of the back of the camera? Or should I look for 1mm? I read the channels are 1.5mm, so wouldn't anything else than 1.5mm cause lightleak? I also don't know how wide I should cut the foam.


r/AnalogRepair • • 14h ago

Help disassembling Ricoh 35EF

Thumbnail
gallery
5 Upvotes

I've had this Ricoh 35EF for a few years now and noticed some light leakage on the latest roll. So I decided to replace the seals. But there's some seals around the back closure that will be near impossible to replace without removing the closure. It seems simple enough, except I can't figure out how to take out the rings holding it down. Any ideas?


r/AnalogRepair • • 8h ago

Camera body Film Advance Lever Stuck But Not Really (Konica Autorex)

1 Upvotes

I'm pretty baffled by this one. I recently bought a Revue-branded Konica Autorex for next to nothing. After cleaning it and replacing the light seals, it looks brand new. I also got it working by removing the bottom plate and unjamming the shutter cocking mechanism.

However, there's a catch: the shutter cocks and fires properly at every angle except when the camera is held in its normal, horizontal position (parallel to the ground).

Everything else is in great shape—the shutter speeds are accurate, the focusing screen and viewfinder are clean, and the shutter curtain looks good. I'm hoping it's not a spring issue, though I've seen similar behavior in other cameras before. Is there a way to fix this without doing a complete overhaul? Any insight from someone familiar with this issue would be greatly appreciated.


r/AnalogRepair • • 13h ago

Issue with autofocus - Ricoh My port Zoom Mini P

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 1d ago

Prinzflex 28 aperture issue

4 Upvotes

Hi,thrifted this lens and has an issue with aperture,any ideas how I can fix it?
Before I tore it down it was stuck at open wide,now I can control it with black hinge inside but it retracts and not clicking[it was before :)


r/AnalogRepair • • 20h ago

Film Advance Lever Stuck But Not Really (Konica Autorex)

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 22h ago

stuck mirror and shutter

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 1d ago

Leica m6 Anti Flare Kit

Thumbnail reddit.com
1 Upvotes

r/AnalogRepair • • 1d ago

Contax TVS lens flex cable - how is it routed under the magnets?

Thumbnail
gallery
14 Upvotes

Hey everyone!
I decided to repair my Contax TVS. I followed a YouTube video and the service manual, and everything seemed to go pretty smoothly until I got to the lens flex cable underneath the magnets.
I’m not sure how it’s supposed to be routed or properly installed in that area.
Has anyone dealt with this repair before? Any advice or suggestions would be greatly appreciated!
Thanks!


r/AnalogRepair • • 1d ago

Solution / Guide Canonet QL17 (non-G-III) lens flashlight test — is this salvageable with a CLA or completely cooked?

Thumbnail
gallery
1 Upvotes

Hey everyone,

I just did a flashlight test from the back of my Canonet QL17 (non-G-III) and honestly got pretty disheartened seeing this.

There’s heavy, cloudy haze covering almost the entire element, some fungus spots/webbing near the edges, and a faint bluish tint in the middle. I haven't run a fresh roll through it yet since seeing this, because I'm worried the shots will just come out completely washed out with zero contrast.

For those with experience repairing Canonets or shooting compromised lenses:

  1. Does this look like cleanable oil haze/surface fungus, or permanent coating etching / balsam separation?
  2. Is it worth taking to a tech for a lens cleaning/CLA, or would the repair cost not be worth it for a non-G-III QL17?
  3. If anyone has shot a lens this hazy before, is it even worth sacrificing a roll just to see the "dreamy" effect, or should I save my film and move on to another camera?

Appreciate any advice!


r/AnalogRepair • • 1d ago

Maxxum 50 frozen?

Post image
2 Upvotes

r/AnalogRepair • • 1d ago

Streaks on the inside of the front element.

Thumbnail gallery
1 Upvotes

r/AnalogRepair • • 1d ago

Other (please specify) Nikon L35AF2 Shutter issue

1 Upvotes

I got a Nikon for my GF for Christmas but there is a problem.

When i try to take a photo it doesn't do anything just the red switch\led in the front is turning on when i press the shutter.

The shutter is not stuck i can press it normally but as i said nothing happens.

I did disassemble it and rotated the counter to 1 manually put the batteries in and pressed the shutter. The flash popped out and after the second press i got flashed directly in my face 🙃. I was thinking that something was stuck and now it works i did try it another time and the same problem occurred. I can press the shutter normally and nothing happens.

Rewind works normally.

I can make a video or some photos to show the problem.

I dont see any broken parts also tbh it actually looks like new inside


r/AnalogRepair • • 2d ago

Let the disappointment and loss of disposable income begin!

Post image
122 Upvotes

r/AnalogRepair • • 2d ago

Solution / Guide Canon P rewind lever

Thumbnail
gallery
9 Upvotes

Hi there! I’m trying to find a replacement rewind lever for my beloved canon P. I sold it to a guy on eBay and he said it came broken (it was completely fine) and so he returned it and now I have to deal with itIt works for now but it’s also kinda broken and I’m waiting for it to break again. I can’t afford to buy a spare camera for parts so I’m trying to see if anyone has a replacement lever. If not I might have to 3d print/ fabricate one.


r/AnalogRepair • • 2d ago

Solution / Guide my EOS 2000d doesn't work on manual mode

2 Upvotes

i have just got a new canon EOS 2000d and a 70-300mm Tamron lense for my birthday but when i try to take a photo on manual mode it always come up with error 01 and it only happens on manual mode i've cleaned the contacts of the camera and lens but it still shows up is there any way to fix this


r/AnalogRepair • • 3d ago

Update: Rollei Prego Micron / Ricoh R1 custom made replacement gear

Thumbnail
gallery
38 Upvotes

Original post: https://www.reddit.com/r/AnalogRepair/s/CsSvqtZ8j5

The gears have arrived and it’s working. I love this.

Anyone needs such a gear? I now have spares. I think they also fit into the GR1.


r/AnalogRepair • • 2d ago

Nikon F viewfinder clip not clipping

Thumbnail
gallery
4 Upvotes

Just picked up a pair of Fs, mostly for the viewfinders(full set.......i'm a hoarder).

On one of them the view finder release mechanism(ie the spring loaded pair of clips that pull to the left when you press the release button) is stuck permanently open, and will in fact spring to the open position if pulled closed. Has anyone seen this before? If so, is there a quick fix, or am i doomed to take the entire thing apart?

Photos attached, first of the delinquent camera, the second of the correctly working camera(this has a broken self timer, but i know what's required there).

Both bodies are in great condition and ideally i'd like to get both of them up and running and released back into the wild. I have two Fs already, don't need four.


r/AnalogRepair • • 3d ago

Repaired this little devil today :]

Thumbnail
gallery
23 Upvotes

Repaired this little devil today, the Kodak Brownie Starmite I.

.

Upon firing the shutter, the shutter would stay open and not close. When i took the camera apart, i noticed that the protective plate (not shown on the pictures) had bend and was in the way of the shutter action. I bend it straight and there ya go! Its fully functioning again. Their easy cameras to work on ofcourse but that doesnt mean they should be forgotten!

.

I've had this one in my personal collection for 2 years now, and always wanted to shoot it and see what its like. It uses 127 film, which was very popular back in the 60s and 70s, and creates 4cm by 4cm square negatives.

.

It has a plastic Kodak Dakon f/11 lens and the shutter fires at roughly 1/50th of a second.

.

As far as i know, on the europian market, only Rollei and Rera still make 127 film. I will be purchasing 2 rolls of Rera black and white, iso 100 and 400 and testing it out hopefully soon! Cant wait to see the images :)

Cheers!