r/AnalogRepair • • 20h ago

Help disassembling Ricoh 35EF

Thumbnail
gallery
5 Upvotes

I've had this Ricoh 35EF for a few years now and noticed some light leakage on the latest roll. So I decided to replace the seals. But there's some seals around the back closure that will be near impossible to replace without removing the closure. It seems simple enough, except I can't figure out how to take out the rings holding it down. Any ideas?


r/AnalogRepair • • 5h ago

Camera body Canon FTb-N stalled mid-wind near end of a roll

Thumbnail
gallery
3 Upvotes

My Canon FTbN stalled mid-wind near the end of a roll, leaving the advance lever locked at rest, the shutter button blocked, the mirror down, and the shutter curtain metal lath resting ~1/3 across the film gate—even though the bottom shutter-release transfer bar and first-curtain release latch move freely without tripping the shutter.

Gallery with video and images:
https://imgur.com/a/canon-ftb-n-film-advance-shutter-stuck-dDCS96p


r/AnalogRepair • • 6h ago

Camera body Nikon FE shutter won't open 100%, reacts sluggish, mirror sometimes stuck

Thumbnail
gallery
2 Upvotes

Recently got a untested Nikon FE and hoped it would work or be easily fixable.

...nope. It arrived with mirror up in M90 mode. Changing the batteries to a fresh pair of SR44 didn't change anything (metering seems to work though!)

I noticed that the shutter blades looked somewhat oily, so I tried to gently remove it with fuzz-free cotton swabs and a few drops of 99% isopropyl alcohol. After that the shutter would snap back and the mirror would flip down.

unfortunately I am not able to shoot a whole 36 pictures with the mirror / shutter getting stuck again. also the first shutter curtain is never opening 100% (see the first pic above).

What I noticed: When I am using M90 or B mode the mirror gets stuck much more quickly compared to when using the other modes. Also, when taking off the bottom cover I noticed that in M90 the copper (?) arm doesn't snap back after the picture's been taken, compared to 1/125 for example.

Which makes me think that either there is more oil next to the shutter blades in the "rest" position below the viewfinder and/or another shutter-related mechanism is covered in old oils,
making it sluggish?
Have any of you ever encountered this "sluggish shutter not opening 100%" behaviour?

I am a novice to repairing analog cameras and I don't think spending 100-200€ on getting it cleaned and oiled professionally is worth it, as I could probably get a working camera for that price. So I'd rather try as much as I can myself or re-sell it as broken.


r/AnalogRepair • • 10h ago

Camera body Any guides for disassembling a DP-30 for an F5?

Post image
2 Upvotes

r/AnalogRepair • • 2h ago

is my camera broken?

1 Upvotes

i suddenly got LE message on my pentax espio 145m super display, i can't turn the camera off by sliding the on/off switch.. i'm not sure what happened...


r/AnalogRepair • • 4h ago

Camera body Nikon AF220 battery contacts

Thumbnail gallery
1 Upvotes

I posted on other community but I guess here is better. Any help is appreciated!


r/AnalogRepair • • 6h ago

Konica T3

1 Upvotes

Hey all, I have a Konica Autoreflex T3 that randomly started giving some problems. Was trying to load film and noticed the advance lever wasn’t turning the sprocket to advance the film. The lever turns freely and has no resistance. The shutter release will also not depress due to this as well. Any advice?


r/AnalogRepair • • 6h ago

Rewind problem Lomo lc-a

1 Upvotes

r/AnalogRepair • • 8h ago

2mm lightseal for the back works for Minolta X-700 and XD-7?

1 Upvotes

It's very hard to find 1.5mm lightseal in my area. Can I replace the old seal with 2mm lightseal? For the top and bottom channel of the back of the camera? Or should I look for 1mm? I read the channels are 1.5mm, so wouldn't anything else than 1.5mm cause lightleak? I also don't know how wide I should cut the foam.


r/AnalogRepair • • 14h ago

Camera body Film Advance Lever Stuck But Not Really (Konica Autorex)

1 Upvotes

I'm pretty baffled by this one. I recently bought a Revue-branded Konica Autorex for next to nothing. After cleaning it and replacing the light seals, it looks brand new. I also got it working by removing the bottom plate and unjamming the shutter cocking mechanism.

However, there's a catch: the shutter cocks and fires properly at every angle except when the camera is held in its normal, horizontal position (parallel to the ground).

Everything else is in great shape—the shutter speeds are accurate, the focusing screen and viewfinder are clean, and the shutter curtain looks good. I'm hoping it's not a spring issue, though I've seen similar behavior in other cameras before. Is there a way to fix this without doing a complete overhaul? Any insight from someone familiar with this issue would be greatly appreciated.