r/CNC • • Mar 31 '26

Machine Purchase Guidance 2026 Machine and Service Sales

10 Upvotes

2026 thread with some changes, I have opened this thread for services. I am going to strictly enforce these rules this year.

READ THE RULES CAREFULLY OR YOUR POST WILL BE REMOVED

Rules:

Used or new-old items ONLY! - This subreddit, and this post is not to allow retail sale of Computer Numerical Control related parts. There will be no influx of commercial sales or anything like that. Repeat offenders will be banned.

Local Sale preferred - This is to protect both the buyer and seller. Shipping introduces other hassles, especially with CNC-related parts that might be large or weigh a lot. Personal addresses must NOT be posted publicly!!!. After discussing the deal, the two parties may exchange details via DM or other messaging services to meet up.

Pictures and Prices - The comment must include pictures of the parts with the poster’s username written on a paper, kept next to the parts. Prices must be included, along with the city, country. The buyers may post their offer publicly or via DMs.

At least a 6 month old Reddit account - Anyone posting any “For Sale” items must have a Reddit account that is at least 6 months old (NO EXCEPTIONS!), with at least some activity apart from the comment in this post about selling their parts.

Parts or Machines - Machines (working or for parting out), raw material, electronics (motors, drivers, controllers, switches/sensors, etc), hardware (machine tools, mechanical tools, profiles, pneumatic/hydraulic stuff, etc), fasteners, etc all qualify as parts. If in doubt, send a modmail. Machines include routers, mills, big-boy VMCs/lathes, etc.

Services - New for 2026 I am allowing quoting, to quote you must provide proof of real life, that is a picture of the poser with username and date on a piece of paper, ideally with some sort of machine tool or CAD/CAM in the photo to verify you are more than a dog with a phone.

The subreddit staff is not responsible if a deal goes sour - While we will take all reports of scamming seriously, the moderation team is not responsible for, nor can we provide any help. The buyer must do their own due diligence before meeting up the seller and exchanging money for parts.

After a successful transaction, the buyer and seller are requested to update/post their comment here. This will help sellers and future buyers in subsequent transactions with the respective seller.

The moderation team reserves the right to remove comments/items-for-sale at their own discretion.

Please adhere to these rules!


r/CNC • • 10h ago

SOFTWARE SUPPORT PureCutCNC v0.6.0

Thumbnail youtube.com
2 Upvotes

r/CNC • • 1d ago

ADVICE Automatic Carbide End Mill Regrinding – Grinding Process and Final Result

303 Upvotes

I've been testing an automatic carbide tool regrinding machine and wanted to share the grinding process and the final result.

The video shows the tool being reground and what the cutting edges look like afterward.

I'm involved with this equipment commercially, but I'm posting this to share the process and get some technical feedback, not to sell anything here.

Curious what you guys think of the result. What would you want to check before putting a reground tool back into production?


r/CNC • • 22h ago

SOFTWARE DIY Pendant for CNC

2 Upvotes

Building a wireless CNC pendant — looking for feedback

I'm working on a DIY wireless CNC pendant using an ESP32-S3 with a 5-inch touchscreen, a rotary encoder, and physical buttons for jogging and machine controls.

I'm considering switching from nRF24L01 to Bluetooth BLE to simplify the hardware and free up some GPIO pins.

Still working on the enclosure design and button layout.

Has anyone built something similar? I'd be interested to hear your experience, especially with Bluetooth reliability and jogging controls.


r/CNC • • 1d ago

OPERATION SUPPORT Workaround for tabs in CAM Studio - please help!

4 Upvotes

I teach a high school level CAD/CAM course. I started out with Solidworks and Mastercam, and happily used them both until the software requirements outpaced what the school computer lab hardware could handle. Then we made the switch to Onshape and Kiri:Moto which worked okay - Onshape was great, Kiri:Moto was getting the job done.

We (province-wide school board) have now purchased an Onshape Education Enterprise licence and are just (I mean, literally today) starting to use CAM Studio. The learning curve is steep, but we’re figuring it out, except the lack of tabs!

Standard CNC practice for all schools that take part has been to install a “sacrificial bed” of plywood to the table (kids cannot be trusted to use the clamps properly so we just oversize the project wood, screw it to the plywood, and use tabs to secure the project piece) and we’ve been at it so long that most machines are long since missing their clamp hardware.

So what do we do now? Anyone else use tabs and have developed a workaround for this?

For reference, my CNC is a Techno LC series 3204, while other schools have Larkens. All routers are at least 15 years old and there is no budget to replace at the moment (in case that was your suggestion).


r/CNC • • 11h ago

HARDWARE SUPPORT what is the ballpark cost for something like this?

Thumbnail gallery
0 Upvotes

I would like an organiser for jewellery/glasses. I know less than nothing about CNCing. I have designed the following in Claude and would appreciate a gauge on how much this would cost to help me decide if this is a route I should go down or abandon. Any guidance appreciated.


r/CNC • • 1d ago

SOFTWARE SUPPORT Image to line cutting

0 Upvotes

When creating a PCB with my CNC machine, it would often be advantageous to not cut out the whole of the spaces between traces, just a line. So I convert the black areas into single line cuts to create the copper traces.

Does anybody know of a good tool to use, to do this type of conversion? I currently print my PCB design to image, import to Easel, then set it to use 'cut inside shape' or 'cut outside shape'.

instead of a shape, I want it to be a line....


r/CNC • • 1d ago

SHOWCASE I built a cycle time estimator because Mastercam’s backplot times are always short. Looking for people to break it.

Post image
11 Upvotes

First, this thing is free to use. No email to enter, nothing to pay, no data collection.

Backplot cycle time estimates have always been off as it does a simple distance-speed calc. If you factor in canned cycles, it gets even worse. Add in tool changes, break clamping, etc, it gets even further off. So, I built this thing.

It only works with Haas mill code right now, though it may work with other fanuc based files. Source of the gcode doesn't matter, Mastercam, Fusion, whatever, just needs to be plain old gcode.

Everything calculates on your computer, it does not send your gcode anywhere. Just plop a program onto it and it will give you a realistic cycle time. I'm finding within about 3% so far.

Current version is calibrated on a UMC-750 but I'm close to adding a VF, there is a beta VF that is select-able now but it borrows rotary calibration from the UMC (in case a trunnion is used) and honestly, it's still under construction...its there mainly to show the possibility of more machines. Even the UMC calibration will be closer to an actual VF than backplot so should still be useful even if you don't have a UMC.

caminstructor.com/haas-cycle-time-estimator

This is hosted on our company website. If you use it, a couple links pop up that go to some of our training products, but it's not required you click on anything to get results or continue using. Just being transparent about that.

What I'm really interested in is programs being run through it and feedback on where it’s off or what else it needs.

Thanks!


r/CNC • • 1d ago

MILL Centric Vice vs Normal Vice

Thumbnail gallery
7 Upvotes

1st question is We changed the jaw ms to aluminium then milling a round profile (we don't use jaw) then center pitch will be changed if that round diameter is plus side or minus side that's why we are planning to buy a centric Vice where once you set then pitch can't get variation because both side moves when we are load a little big diameter. Is that problem will sort out or not ?

2nd question is when we are doing second operation minimum it'll get .08 taper for 2nd side facing operation but I think force comes from one side that's why get taper

But if we use centric Vice forse will comes from both side so can we expect less than 0.02 taper ?

I'm a fresher Kindly help me to get my point


r/CNC • • 1d ago

ADVICE Where do you guys usually buy your SS 304 / 316 flanges from?

0 Upvotes

as the title says where do you guys buy or import ss 304/304L and 316/316L flanges from ??

Prices of SS 304 and 316 have become crazy lately. We're looking at some other sourcing options to get better rates.

any recommendations ??


r/CNC • • 1d ago

ADVICE Looking for a 5 axis

Thumbnail reddit.com
0 Upvotes

r/CNC • • 1d ago

HARDWARE SUPPORT HMI touchscreen

2 Upvotes

Help!!! There’s a small tear in the protective layer on HMI screen. I use a glass cleaner wipe and accidentally wiped over the tear and got fluid in there. Now it doesn’t respond to my touch in that area where the tear is any idea how to fix this problem? Thanks!


r/CNC • • 2d ago

ADVICE Tormach 15SL purchase

Post image
27 Upvotes

I’m looking at a 2016 Tormach SL15 pro tomorrow. Anything I should be looking at specifically with this model? Did these lathes change much over the years? They’re asking $10k USD


r/CNC • • 2d ago

HARDWARE SUPPORT I got more than I was expecting

Thumbnail gallery
9 Upvotes

r/CNC • • 2d ago

SOFTWARE Keeping your nesting software after a fiber laser upgrade

1 Upvotes

I’m looking into this for a project with Bodor Laser. If your shop switched laser brands, could you keep running ProNest or whatever you were already using, or did you have to switch to the new machine’s software?


r/CNC • • 2d ago

HARDWARE SUPPORT Suggestion for a machine to do lights-out machining

5 Upvotes

Maybe this should have been Operation Support.

I am not a machinist. I am not making pieces for sale.. I am making parts for our machines in-house.

Anyway, I am looking for a used machine to build pieces that look kind of like this:

But imagine them being a foot across and almost 5 feet long (300mm x 1400mm). The holes in the top are radial, and there will be a LOT of them. These will be made out of alumimum.

The plan will be to do the bottom surface first because the bottom surface has mounting points, and a fixture will be built that the piece can be fastened to with fasteners from the bottom so that the top and sides can be profiled in one long session.

I don't care how fast it is. I will be setting it up and starting it then letting it run all night, so it will have 16 hours to do each piece. I can run it gently to LESSEN the risk of traumatic failure.

I have seen HAAS VF6's on the market, and they seem like a good prospect. 64" of travel should be sufficient, I think.

I know I need a chip conveyor.

Is there anything terribly important that I'm not thinking of (other than the obvious you-shouldn't-be-doing-this-you-don't-know-what-you're-doing part)?


r/CNC • • 3d ago

MILL Owner tasked me to find a unicorn machine

45 Upvotes

I don't even know if this machine exists or if it's straight up impossible. Wants a continuous 5 axis with through spindle mql and air, standard flood coolant as well, with a 20,000 rpm hsk63 spindle with a smaller floor footprint. God help me, and by God, I mean any of you fine folks who could help me out. He wants a cnc that can use lens, barrel and tapered tooling testing. We're a cutting tool company that is looking to upgrade the r&d machines.


r/CNC • • 2d ago

SOFTWARE SUPPORT SVG files coming out as rectangles?

Thumbnail gallery
1 Upvotes

Hi all, not sure if this is the right community to be posting this in, this is far from my area of expertise. I’m trying to get some acrylic templates cut out, photos 2 and 3, just simple shapes as pictured. When I sent the SVG files to the company, they appear as rectangles as shown in photo 1. I used Canva to make the shapes and exported them as SVG files, I am not sure which program they are using. Does anyone know what might be causing this? When I open them they show up properly


r/CNC • • 3d ago

OTHER CNC Machine YG8 tungsten carbide plate pressing

76 Upvotes

Saw this on another community and thought it was cool


r/CNC • • 3d ago

HARDWARE SUPPORT CNC Lathe Turret Alignment

2 Upvotes

TLDR: Looking for a guide to aligning turrets that are off center for machines such as a Hyunadi 700, Puma 700…

I run a Hyundai 700L with a 12 tool turret at work. 99% of the time, the material I get has a hole already drilled in it, but sometimes I do run solid material. In those cases, I need to face down to the center and use an inserted drill to punch a hole into the part. Problem is that the turret is off center from years of taking hits. When I try to face down to the center with a cnmg, the tip of the insert chips at around 1/4” diameters and I can see that the tool is below center line. Inserted drills struggle to cut properly as well because of alignment issues.
Over the years, I’ve learned how to align the spindles & steady rests on our machines. Those are relatively easy since it’s a matter of loosening bolts and adjusting alignment then retightening. I’ve even aligned other turrets in the shop that can be aligned the similarly once you remove the face cover from the turret.
This turret seems different though. I’ve been told that to fix this turret, it requires a complete disassembly in order to pull and replace some dowel pins that are likely bent from turret crashes. I like to learn how to fix things in the machines when I have down time, so one day I tried to see how far I could get. When I removed the face plate from this turret, there was a hole on a cylinder that gushes hydraulic oil. That is something I haven’t ran into before when aligning turrets on our 400’s. When I ran into that issue, I chickened out and reassembled the face plate. I know how to stop the oil from gushing out by turning off a bit through the PLC Status screen. I’m thinking about trying again when I have some time.
Is there a YouTube video or any source that I can follow along to learn how to do this procedure? Even if the dowel pins are bent, isn’t the turret block itself bolted onto a plate that aligns with those pins? If I can loosen up those bolts, maybe I have enough play within the bolt circle to shift the turret enough to get better alignment and retighten them. Anyone have any experience with this?
Again, I do have workarounds already for facing and drilling, but I’d like to know how to repair the turret as I feel like that would be good knowledge to have in my tool belt and make me more valuable.


r/CNC • • 3d ago

ADVICE Job shops: what do you do with an RFQ that's missing the drawing or tolerances?

1 Upvotes

I'm a software engineer, I 3D print parts as a hobby and I used to work in an industry close to manufacturing, so I've always been curious how parts actually get made in a real shop. Lately I've been trying to understand the quoting side of job shops.

Reading through this sub, the same thing keeps coming up: RFQs with only a STEP model, no 2D drawing, or no tolerances in the title block. Last time one of those landed in your inbox, what did you do: chase the customer, quote with your own assumptions, or pass?


r/CNC • • 4d ago

ADVICE Still flaring with sharp inside corners

Post image
8 Upvotes

G code is from v carve pro

Using sharp inside corner

Bit diameter is 1-9/32”
Supposed to be 90 degree (I don’t know how to verify if it’s accurate) my cuts seem to be at a 90 degree when checking with a square.

.375” mdf
.375” cut depth

Previously posted but also had lots of chatter and vibration which was corrected, but I still can’t figure this one out.

Thanks!


r/CNC • • 4d ago

GENERAL SUPPORT Hello, guys anyone using a two trees machines TTC 6050 with fusion360 cam, I have some questions about the settings of the machine

2 Upvotes

r/CNC • • 4d ago

SOFTWARE Follow-up: wireless 4th axis now driving the stepper motor

Thumbnail youtu.be
7 Upvotes

A follow-up to my earlier post on a wireless 4th-axis controller.

The first post showed the communication side of the project: sending position commands from the CNC control to a standalone indexer over Wi-Fi.

This video shows the next step, getting the controller to drive the stepper motor through commanded positions and showing the results alongside the CNC position display.

Original wireless 4th-axis proof of concept post

Still a work in progress, but the basic communication and motor positioning are coming together. The next part is refining the system and putting it through more testing.

Interested in feedback, let me know what your impressions are.