r/CarHacking • • Feb 02 '17

Car Hacking Subreddit Intro

94 Upvotes

Hi rch, we have added a lot of people lately with intro posts on other subs like the one below. We also usually get about 10 subs a day from people just stumbling in here. So I wanted to create a welcome post, to kinda show them what we are about and how to get started. If anyone has anything to add please do so. If anyone has any questions about us or where to start do so here.

Our goal is to create a highly technical car subreddit, a place for automotive engineers, senior technicians, full blown car nerds, or people who are working towards one of these. We are interested in the inner workings of cars and today that often involves electronics. While we see electronics as the priority we are pretty liberal in allowing other topics as long as they somehow fit our goal of trying to understand cars. So things like DIY aero, suspension setup and other things the community is hacking on come up. In general our other tangential interests include: Modern cars, New tech, Open source hardware/software, DIY, hot rodding, eco modding, customization, security research, right to repair and more.

We started this subreddit about a year ago. Right now we have 3000 people and discussion is just starting to get good. Most of our members found us through maker or engineering subreddits. So I wanted to reach out to more of the car communities and try to grow our knowledge base.

Our name is r/carhacking and I know the term hacking can be offputting to some as it has a bad connotation. When someone says they are “hacking” their car it generally means they are trying to reverse engineer it for any number of reasons like to find security flaws, make upgrades, make repairs, or just understand how it works.

Here are a couple examples of posts that have been popular so far. A lot of our posts focus on beginner through intermediate projects using arduino and readily available hardware for the purpose of learning and or not paying a premium for things you can make yourself:

More advanced projects:

Relevant news/ research:

If your new our documentation is a good place to start

If you aren't new and you’re interested in helping out please consider:

  • Improving documentation - think about what resources have helped you
  • Spread the word - this is a niche community that is pretty spread out, but there is a lot of potential if we can get together on a third party site like this
  • Work on the theme, sidebar and flair - this is next level community stuff that isn’t necessary, but it’s fun to work on when you have the time.
  • Modding - right now we are fine, but we might need help in the future as we grow

Let me know if I missed something or got something wrong.


r/CarHacking • • Feb 27 '21 Popcorn

CAN CAN bus and car hacking getting started resources

300 Upvotes

I get asked how to get started with automotive networking, car hacking, and CAN almost weekly. I often direct people to this subreddit, so I figured I would help out and post some resources I have found and think are a good place to start.

learning resources:

Car Hacking 101: Practical Guide to Exploiting CAN-Bus using Instrument Cluster Simulator

I also direct people to the Car Hacking Village to get some hands-on experience. They put on great conference talks, demos, and contests. Looks like they are even working on some “getting started” content.

And of course, The Car Hacking Handbook is a great resource.

I will add more as I think of them. Please add your finds in the comments.

Tools:

Good wiring diagrams and car manuals are essential. This is pretty much where my research starts for each project. You see how things are networked and what to expect to find on CAN. You'll quickly learn to recognize things like gateways. You can also use the troubleshooting section to understand things. For example, what things do I need to control to start the car?

I like:

  • prodemand (I pay $170/mo for a shop subscription, I think you can purchase it for individual cars, but be careful you often have to jump around to find a year that has complete diagrams)
  • Identifix (probably what I would buy if I was starting over)

Basic hardware: Here you will be working with things like Arduino, Linux, SavvyCAN, and Can-utils. You have to learn to do a lot yourself, but these tools are more open for you to make them do what you need.

Tools designed by the community I use:

The above articles offer a pretty good step-by-step guide to getting started with the Macchina M2.

Any cheap “Amazon special” OBD2 dongle will come in handy from time to time. They are all based on something called ELM327. "ELM327 abstracts the low-level protocol and presents a simple interface that can be called via a UART". This abstraction has fundamental limitations that prevent it from being useful in most serious applications. But, it is sufficient for reading and clearing some codes and that sort of thing when you’re getting started.


r/CarHacking • • 14h ago

Original Project Built an Android car dashboard for mounted phones, tablets, and head units with 3D navigation, custom layouts, and OBD2 telemetry

Thumbnail
gallery
18 Upvotes

I've been building Cardashly, an Android car dashboard designed for mounted phones, tablets, and Android head units (Android 8.0+).

What it currently includes

  • Create your own dashboard: Drag, resize, and rearrange cards, columns, dock shortcuts, widgets, and colors in Theme Studio to build the exact layout you want.
  • 3D Navigation: Built-in 3D map navigation right inside the dashboard alongside your media and drive data.
  • Weather Forecast: Live weather and forecast cards directly on your drive screen.
  • Trip Price Calculator & Trips History: Log drives automatically, review your trips history, and calculate fuel/trip costs.
  • OBD2 Telemetry: Connects to ELM327 adapters over Bluetooth Classic, BLE, Wi-Fi, and USB OTG serial (CH34x, FTDI, CP210x, PL2303).
  • Head Unit & Offline Radio Support: Can be set as the default home launcher on Android head units, with built-in offline radio and media controls.

Pricing & Feedback

Core dashboard features are free to try, with an optional Pro upgrade for extra themes and customization.

If anyone here runs it on a mounted phone/tablet, an aftermarket head unit, or with an ELM327 adapter, I'd love feedback on what breaks or what OBD2 PIDs and dashboard cards you'd want added next.

Link: Cardashly on Google Play


r/CarHacking • • 1h ago

Original Project VAG Diagnostic test!!!!

0 Upvotes

Hi! 🚗 I'm looking for people with a VW / Audi / Škoda / SEAT / CUPRA to test my VAG Diagnostic app (Android). So far I've mostly tested it on a bench with a simulator, and now I need readings from real cars.

The test version only reads data: it detects control units, part numbers and fault codes. It does not clear faults, code anything, or change any car settings. The test takes about 10–15 minutes.

What you need:

• an Android phone,

• an ELM327 Bluetooth OBD adapter (e.g. Vlink); Wi-Fi adapters won't work,

• a VW group car, ideally from around 2012 onward (Golf 7, Octavia III, A3 8V, Leon III and newer). Older cars are useful too.

📥 Download the app:

https://drive.google.com/file/d/1-jvtmcPDvu_mjCv1VXyD7VxkI3PqVS8l/view

The current version is tester-2 from 4 November. The app is available in English, German and Polish, and it automatically switches to your phone's language.

How to run the test:

  1. The car is standing still, ignition on, and the adapter is in the OBD socket and paired with your phone.
  2. In the app, tap the OBD connection card at the top, then "Connect" next to your adapter.
  3. Choose "Full diagnosis." The first time, press "Activate PRO test" (it's free, you're not buying anything), then press "Full diagnosis" again.
  4. Press "Run Auto-Scan VAG UDS," then "Run full Auto-Scan UDS," and wait until it finishes without locking your phone.
  5. Press "Show result and fault clearing," take screenshots of the result, and go back with the arrow.
  6. Press "Copy diagnostic log" and paste it to me in a private message or by email at diagnos.vag@gmail.com. Add the car, year, engine, gearbox and adapter.

🔒 The app masks the VIN and serial numbers in the log by itself. In the screenshots, cover the VIN if it's visible. Please send logs to me privately, not to the group.

⚠️ Don't use clearing in "Engine diagnostics" or "OBD Terminal," since Auto-Scan is enough for this test. Scan only with the car standing still.

If you have VCDS, OBDeleven or Carista, please also send a screenshot of their fault list. That comparison would help me a lot. A log from a failed scan is valuable too, so send it freely.

Thanks for your help! 🙏


r/CarHacking • • 3h ago

Cool Project Find Bosh KTS 540 Free Licenses?

1 Upvotes

Hi everyone! I have a Bosch KTS 540. I’m looking for a free license (cra*k) for ESI[tronic] or a similar free program that works with it and is as up to date as possible. Thanks in advance for any guidance!


r/CarHacking • • 1d ago

Original Project Think I finally finished my android auto project in my OEM Chevy Sonic radio

37 Upvotes

I will provide details in the comments if you want.


r/CarHacking • • 14h ago

Original Project Converted TIS200 (Opel's Diagnostic Software) to a website

Thumbnail tis2000.chrismin13.com
3 Upvotes

r/CarHacking • • 9h ago

Original Project Title: Need CAN wake-up frames for 2013 Mazda 3 EHPS pump (BFD1-32-600 / JTEKT 135201239) — stuck at 0x240 -> 00 80 00 00 00 00 00 00

1 Upvotes

 

Hi everyone, 

I am setting up an Arduino Nano + MCP2515 controller to run a 2013 Mazda 3 electric power steering pump (BFD1-32-600 / JTEKT 135201239, stamped 578M3423) to power a Toyota steering box in my 1950 Willys. The open-source Arduino sketch I planned on using (BBM4 / shifty35) leaves the pump in standby, so it looks like Mazda changed the CAN wake-up sequence on the 2012–2013 firmware. 

Hardware & Wiring Setup (Verified Working): 

  • Pump: 2013 Mazda 3 2.0L MZR (VIN JM1BL1TF0D1836705), 2-connector style: 

    • Heavy 2-pin connector: Thick White (+13.6V LiFePO4 battery), Thick Black (GND). 
    • Small 6-pin connector (3 pins populated): Red (CAN_H), White (CAN_L), Sky Blue (+12V switched ignition). 
  • Controller: Arduino Nano + MCP2515 (8 MHz crystal, 500 kbps, 120Ω J1 termination jumper installed, common ground tied to battery negative). 

What Is Currently Happening: 

  • With +13.6V connected to the heavy 2-pin power connector first, and +12V applied to the Sky Blue wake-up wire, the pump's internal logic powers up, ACKs 500 kbps CAN traffic cleanly, and continuously broadcasts 0x240: PUMP 0x240 -> 00 80 00 00 00 00 00 00 
  • I have tried sending the standard 2010–2011 (BBM4 / shifty35) frames every 10ms: 

    • 0x201: {0x1F, 0x40, 0x00, 0x00, 0x27, 0x10, 0x00, 0x00} (2,000 RPM, 0 km/h) 
    • 0x082: {0x00, 0x32, 0x00, 0x00, 0x00, 0x00, delta, 0x00} (steering rate delta = 1..16) 
  • Even with those frames running, Byte 1 of 0x240 stays latched at 0x80 and the motor remains off (Byte 0 = 0x00). 

Questions for Anyone Who Has Decoded the 2012–2013 Mazda Pump: 

  • Does the 2012–2013 BFD1-32-600 pump require an additional HS-CAN frame (such as 0x420, 0x215, 0x090, or 0x202) or a rolling counter / checksum on 0x082 or 0x201 before it clears 0x80 and enables the motor? 
  • Or does 0x240 Byte 1 = 0x80 with 0x201 + 0x082 active indicate a latched internal motor/FET fault on this unit? 

Any captured startup logs from a 2012–2013 Mazda 3, DBC snippets, or working Arduino examples would be hugely appreciated. Thanks! 


r/CarHacking • • 16h ago

CAN Need a CAN capture from an A4 B8 Concert 3 radio (infotainment CAN) at ignition on

Post image
3 Upvotes

Hey everyone,

I have a B8 A4 Concert 3 radio and I'm trying to get it to turn on outside the car. I can't find the CAN message that tells it the ignition is on.
Has anyone got a CAN capture from the radio's bus (infotainment CAN, 100 kbps) from the moment the ignition goes on? Even a few seconds of a log would help. Any B8 or B8.5 A4 or Q5 with a Concert or Symphony radio should do.
I'd also love to know if anyone has run one of these on the bench and what they sent it.

Happy to share whatever I find once I get it working. Thanks!


r/CarHacking • • 14h ago

Scan Tool VX Manager 1.2 drivers

2 Upvotes

Does anyone have the VX Manager 1.2.x (probably 1.2.0.0905 or similar) drivers executable installer you could share with me?

VXDiag no longer supplies this older version. I have a VXDiag VCX Nano USB version for JLR if that matters. Thank you.


r/CarHacking • • 17h ago

Original Project Audi ISG bench operation

Thumbnail
youtu.be
3 Upvotes

For a while now, I've been thinking about a way to adapt a starter generator to my old Mercedes as a way to help off the line acceleration and smoother, quieter starts. I see these units every day in my shop, and most of them have no problem starting modern direct-injected gas motors or diesels, so I know it's possible. Next up was finding one that would work. It's pretty close in size to the OM606 alternator. This one puts out 60 Newton meters at the pulley, so obviously, if you do the calculations, it'll be more than enough torque to turn the motor over.

It's taken a few days, and ultimately, some people on OpenInverter had some success and was able to use some of that information through Google Gemini and Argon and finally get it to speak to the CAN-USB. Once we were able to speak to it, I was able to suss out some of the CAN messages and what they were responsible for. At this point, I had a very rough dashboard that was working. At this point, I'm basically giving it full bus power, 12 volts, to turn it on and then basically limiting the maximum amount of torque that it can impart on the pulley because it'll just spin out of control without a motor on it.

So the next step is to adapt it to Baldur's DSL1 (this is what is running my OM606 now) using a CAN32 interpolator since his control unit, being open, can configure the CAN for a lot of great stuff. I'm near certain I can set this up to start the motor once it's warm, and also the motor can shut off at stoplights and proceed onward. So that's what I've been working on.

Apologies for the mumbling


r/CarHacking • • 1d ago

Original Project StradaOS 2.26 – free, open-source launcher for Android head units, now with an OBD-II panel, offline turn-by-turn navigation and 4 themes

Thumbnail
gallery
72 Upvotes

Guys, StradaOS has now surpassed 10K downloads and 380+ stars on GitHub! 🗣

And the updates just keep coming! 🫱🏼‍🫲🏽 Thanks to many of you, we’ve been building one of the best launchers for vehicle displays. Check out the new features in this latest version below 👇🏽

🔥 New in 2.26 🔥

⚙️ OBD-II panel (ELM327 over classic Bluetooth or Wi-Fi): coolant, battery and RPM over any theme, voice alerts, trouble codes explained offline, live charts and optional AI with your own key. Includes a built-in guide on which scanner to buy (BLE-only ones don't work).

🗺 Turn-by-turn navigation with voice, alternative routes and stops. It keeps working offline with a downloaded map (approximate route).

🌌 Themes: Classic, Aurora and Cobalto (free), with Faro coming soon. Each comes in dark and light, plus a mixed speedometer.

✅️ Also: Android Auto via Open Headunit, music on the home screen, maintenance reminders, 11 languages, Android 4.1+.

Download and source: github.com/lordnordic-debug/StradaOS. Feedback welcome, especially from different head unit brands!

If you like the project, have found it useful, and it has given your screen a fresh lease on life, consider buying me a coffee ☕️ ko-fi.com/stradaos

❗️No root, no flashing, and uninstalling it leaves your screen exactly as before. The "OS" stands for Open Source (GPL-3.0, no ads, no accounts).


r/CarHacking • • 17h ago

Tuning How would I depin this style of connector

Post image
0 Upvotes

I’m trying to swap two wires so that manual mode is reversed like a rally car. It’s this style of connector and I can’t figure out how to open that latch to get the wires out


r/CarHacking • • 19h ago

Scan Tool anyone had success getting any ai model to mod anything related to rosstech?

0 Upvotes

as says. anything related to rosstech makes my ai coding agent tweak the fuck out and start preaching about the licensing. bit annoying. anyone else had success?


r/CarHacking • • 22h ago

Tuning Need a damos / als file for winols for my 105hp 1.6tdi golf 7 from 2014 04L907309B 04L906021M

Post image
1 Upvotes

r/CarHacking • • 1d ago

UDS My car stopped driving

8 Upvotes

Honestly i feel really stupid
I was working on my car canbus for a while now with the main intention of figuring out the factory service modes
While doing a sweep on the tcu to find the learning data erase i sent a command by mistake im not sure what it does
The problem is that it have been accepted and the car not can’t go to drive gear with the error oil pump type mismatch
Which i think is the whole problem with the command i sent, its either setting the pump to a diffrent type that is not correct or erasing the entire eeprom
The conclusion is
IM FUCKED


r/CarHacking • • 1d ago

Cool Project Find firmware carplay- android auto based in soc allwiner

2 Upvotes

Acabo de descubrir cómo extraer el firmware de estas pantallas basadas en Allwiner mediante tarjeta SD; Estoy documentando todo ahora mismo.

actualizacion:

GitHub - PeDaniel-cerpa/tina-firmware-dump: Dump firmware from Allwinner / Tina Linux (OpenWrt) CarPlay screens and Android head units over IP - no teardown, no reflashing. Root shell, MTD backup, BusyBox telnetd. · GitHub

ya he cargado la documentacion a mi github


r/CarHacking • • 1d ago

No Protocol BCM replacement on a Chevy.

1 Upvotes

I am using TECHLINE SPS to reprogram a BCM on a 2021 Chevy Blazer.

The original got wet and corroded. Same part number swapped. Obviously used so has another VIN. I spent 4 hours tonight trying to program the new one but the process freezes at “programming ECM” and eventually gives a FE05 error. I assumed that reprogramming would reflash to the existing VIN but it seems to be freezing because the immobilizer is not able to handshake with the ecm and BCM.

Is there a separate procedure for the VIN relearn I’m not seeing or maybe another module growing it off?

Yes the fob has a fresh battery and is in the cup holder “transponder pocket”. Just hoping for some guidance and not some smooth brained numbskull to say “shouldn’t have touched if it was corroded”, I’ve inspected everything else and it all looks fine.


r/CarHacking • • 1d ago

UDS Audi ODIS Help 😩

2 Upvotes

If you have access to Volkswagens, ODIS system online, can I give you my VIN number for a screenshot of the reports showing online? Control modules? Orders? Procedures? test plan? Special functions? Someone please help 😩😩


r/CarHacking • • 2d ago

Cool Project Find NexusCAN - Open Source CAN Bus Analyzer Based on Rust (Reposted)

Thumbnail
gallery
42 Upvotes

After working with CAN Bus in the automotive industry for 5 years and leaving my job, I tried several existing tools on the market. Since many of them are paid, I decided to build my own project focused on both mostly UI and functionality.

Introducing NexusCAN, an open-source, project-based CAN Bus analysis application.

Development was done with Claude and Gemini.

With your sponsorships and GitHub support, much better features can be added.

The project includes features—especially in the UDS section—that cannot be physically tested right now. Because I don't currently have a UDS-capable device on hand, I haven't been able to test it thoroughly enough. However, I have been able to test features like ISO-TP using a UDS simulator. It will grow with your ideas and feedback.

What it does today

Bus analysis

- Live trace and an overwrite view with full DBC / KCD decoding: Intel and Motorola layouts, signed and float signals, cascaded multiplexers, CAN-FD 64-byte frames, J1939 PGNs

- Multi-axis signal plotter, a bit-layout matrix for every message, drag-and-drop instrument panels bound to signals

- Import and export of .blf, .asc, .trc, .log and .csv, with replay speed control

- CAN error frames decoded into readable causes (stuff, form, ACK, CRC, error-passive, bus-off)

Reverse engineering

- A bit-level heatmap that shows how often each bit toggles, for every ID

- Baseline → Action: record a few seconds of the car doing nothing, then press the button or open the door. Only the bits that moved during the action stay highlighted. Counters, checksums and sensor noise are muted automatically.

- A field classifier that spots rolling counters, checksums (XOR, SUM, CRC8 J1850 / AUTOSAR), flags and physical values

- Correlation search: pick a reference, for example an OBD-II PID like vehicle speed. It tries every start bit, length and byte order, then gives you the matching signal with its factor and offset.

- Save to DBC: found signals go into a real .dbc file, or straight into the live decoder

- Coming next: a Cheat-Engine-style Value Scan. Scan for "80 km/h", change speed, scan "increased", and repeat until only one signal is left.

Diagnostics

- UDS client, an ECU map built by functional discovery, a DID inspector, DTC reports, and a traffic view that expands every ISO-TP frame together with its P2 and STmin timing

- Passive ECU discovery that works without transmitting anything

- A visual Flow Editor for building diagnostic sequences, flashing (34/36/37) and SecurityAccess key providers. Honest note: all of this has been tested only against simulated ECUs on vcan0, not real vehicles yet.

Safety first

Every channel opens in Listen-Only. Transmitting requires an explicit, confirmed "Arm", and Stop All TX is one click away on every screen. I didn't want a tool that can accidentally spam a real vehicle bus.

Under the hood

The core is Rust, the desktop app is Tauri v2 and the UI is React. Frames are fixed 80-byte structs with no heap allocation on the receive path, and the UI updates at 60 Hz

instead of sending one message per frame. In tests it handles 50,000 fram.

Hardware

- Works now: SocketCAN on Linux, SLCAN adapters on all operating systems,mulator, and replay of recorded logs

- Written but not yet tested on real hardware: gs_usb / candleLight (CANastall needed) and PCAN-Basic

This is where I need you. If you own a CANable, PCAN, Kvaser or a UDS-capable tool, a short report ("works / doesn't work on X") would help a lot. Real-world traces are also welcome.

Try it

- Windows, Linux and macOS builds are on the Releases page

- No hardware? It runs in five minutes on a virtual CAN bus with simulateME)

GitHub: https://github.com/kadirtunc/NexusCAN

It's a v0.1 preview, so expect rough edges. Bug reports, feature ideas and criticism are all welcome. A ⭐ helps the project get seen.

Hats off to all open-source developers—respects and greetings to you all.

Thanks for all your support https://github.com/sponsors/kadirtunc


r/CarHacking • • 1d ago

Original Project Fixing a bad ECU tune on a 2011 Mondeo 2.0 TDCi

Thumbnail
barisuraz.github.io
1 Upvotes

r/CarHacking • • 2d ago

Original Project Android app for CAN signal reverse-engineering: guided tests, GPS/IMU correlation, DBC + candump export. Looking for feedback (limitations listed)

44 Upvotes

I've been working out the CAN signals on a couple of EVs and wanted the workflow on my phone instead of a laptop in the passenger seat, so I built an Android app. It's a signal-decoding tool (working out what the bytes mean), not an injection/attack tool.

The video is a replay of a real drive log from my own captures.

What it does

- Live view: every ID with rate and byte changes, plus a per-ID bit view showing what's changing now and what changed before

- Guided tests: it prompts "press the brake… release…", records the windows, then ranks bits/bytes by how well they follow the action. Counters and free-running values are filtered out of the ranking

- Find value: type the number on the dash (speed, SOC…) and it searches 8/16-bit fields in both byte orders, signed and unsigned, then narrows it down with a second reading

- Find signal: correlates fields against the phone's GPS speed, gyro yaw rate and heading, and gives a scale, offset and lag

- DBC import and live decode, and DBC export of what you've found (or merged into an existing DBC). Confidence goes into the signal comments

- Recording with one-tap markers plus phone sensor data. Export as candump .log, SavvyCAN CSV or Vector ASC

- Read-only diagnostics (UDS/OBD over ISO-TP): VIN, DTCs, module scan

- Optional LLM assistant (bring your own API key): it calls the same deterministic analyses above and shows their scores, so it's not guessing bits

Safety design

- Every adapter is opened in listen-only mode. If the firmware can't do listen-only, the app refuses to open it

- Only the diagnostics screen can transmit: read-only services on an allow-list, refused while the car is moving (speed from the bus or GPS), and every sent frame goes to an audit log

Limitations (being honest)

- Adapters: CANalyst-II, candleLight/gs_usb (CANable with candleLight firmware) and SLCAN over USB serial (CANable stock firmware, USBtin, STM32 clones). The candleLight and SLCAN drivers are new and have only been tested against simulated devices; I haven't run them on real hardware yet. Listen-only on all of them is not yet bench-verified with a scope or a second node

- USB OTG only: no Bluetooth, and no ELM327 (they drop frames on a busy bus)

- Classic CAN only: no CAN FD capture, no J1939 decoding

- No transmit, replay, fuzzing or injection. That's deliberate

- Multiplexed DBC signals are decoded without checking the multiplexer

- No checksum/CRC or rolling-counter reverse-engineering tools yet

- Timestamps: the CANalyst-II path stamps frames in batches at millisecond resolution; candleLight uses the adapter's microsecond clock

- One adapter at a time. Android 10+. Closed source for now, early beta

What I'd like from you

  1. Which adapter should I prioritise for real-hardware testing: CANable, candleLight, PCAN, Kvaser, something else?
  2. What's missing for your workflow? Checksum detection, J1939, an FD-capable adapter?
  3. Would you use the guided-test plus GPS/IMU approach, or is a laptop with SavvyCAN/Cabana fine for you?

Happy to go deep on any of the internals.


r/CarHacking • • 1d ago

Community Can someone generate a key for me??

Post image
0 Upvotes

r/CarHacking • • 1d ago

Community Where can i buy a relay setup

0 Upvotes