r/CommercialAV • • 2d ago

news Salary Survey Time (almost - let's talk about it)!

38 Upvotes

So a few years back, we did a salary survey partially in response to AVIXA collecting that information and charging for it (boo, AVIXA, you're supposed to be helping the industry). I've had a lot of feedback that location, role, and salary has helped people negotiate better pay or understand what they should be looking for. That feedback has been great.

I also received feedback that some of the data collected made it so people could potentially be identified by that information. We collected a LOT, including race, age, and gender identity. I want the data to be freely available and transparent, and I want as many people as possible to participate.

Given that, while I think it's important to talk about some of those aspects, I'm not going to collect them this time around. I will be collecting:

  • Location (urban, suburban, rural, plus city, state/province, country)
  • Age
  • Education level
  • Certs
  • Time in the industry
  • Job Title

I'll also collect info about the company you work for (in general), customers you serve, company size, benefits, and a few other non-identifying things.

I'd love to have some conversation and feedback about this, along with any other ideas about good or useful data to collect either optionally or as something that is not identifying but nice to know. Assume that if you respond, anyone can see that data. This is a good time to launch this, we can run it until end of December and then have it put out by early January for consumption.

Let me know your thoughts!


r/CommercialAV • • 1h ago

question Are we overselling 4K in digital signage?

2 Upvotes

I work with commercial LCD display hardware, and there's something I've been questioning lately.

Many customers ask for 4K displays, especially for outdoor digital signage. But in real-world installations, does 4K always make a noticeable difference?

For example:

  • A 55-inch outdoor display viewed from 3–5 meters away.
  • A restaurant menu board where most content is text and images.
  • A high-brightness advertising screen installed along a busy street.

In these situations, I sometimes wonder whether brightness, contrast, reliability, and content quality matter more than resolution.

There's another issue I've noticed: some Android hardware is advertised as supporting 4K, but that doesn't necessarily mean the UI, video rendering, and physical display output are all running at native 4K.

So I'm curious about your real-world experience.

Have you ever seen a customer pay extra for 4K when 1080p would have been perfectly adequate?

And for those working in commercial AV, at what screen size and viewing distance do you think 4K becomes genuinely worthwhile?

I'd love to hear perspectives from installers, integrators, and CMS developers.


r/CommercialAV • • 22h ago

troubleshooting HDMI works in Extend mode but not Duplicate mode. Why?

11 Upvotes

I had a strange issue with an HP ProBook 450 G7 connected to a Hitachi projector.

Using a 15–20 ft HDMI cable, Extend worked fine, but Duplicate didn't.

I tried changing resolution, refresh rate, and even re-imaged the laptop. Nothing helped.

Another laptop worked perfectly with the same projector and cable.

Finally, I replaced the long HDMI cable with a 6 ft cable, and Duplicate worked!

My guess is the older laptop has a weaker HDMI signal and can't handle the longer cable as well as the newer laptop.

Does that make sense? Anyone experienced something similar?


r/CommercialAV • • 21h ago

question 8 channels for community theatre: Sennheiser EW-D vs. Shure SLX-D+ (~€2,400 difference) – Which way would you go?

0 Upvotes

Hey everyone,

I’m currently speccing an 8-channel wireless system (bodypacks + headsets) for a local community theatre group. Our season only runs for about a third of the year and we perform in a school gym hall. Because the hall is used for sports during the week, nothing can stay set up—the entire rig needs to live in a mobile rack that gets wheeled out of backstage storage for every single rehearsal and packed away right after, so fast setup and teardown is critical. Budget is tight, though we are applying for local arts grants.

I’ve narrowed it down to two complete carts on Thomann (including 8 channels, rechargeables, chargers, and antenna accessories):

  1. Sennheiser EW-D (R1-6): 8x single receivers, 8x bodypacks+ accessories -> ~€6,235
  2. Shure SLX-D+ (G65, the new Plus series): 4x SLXD14D+ dual bundles (each includes 1x dual receiver + 2x bodypacks)+ accessories -> ~€8,621

I’m torn between the two because both have compelling pros for our use case:

Pros for Shure SLX-D+:

  • ShowLink Ease: Pushing frequency changes and remote gain adjustments over-the-air while the packs are already on the actors, without having to walk to the rack and re-sync via IR.
  • Wired Ethernet / Companion & WWB: Proper RJ45 ports to integrate the receivers into Bitfocus Companion and Wireless Workbench for a unified "Next Cue" workflow and live battery/RF monitoring on a Stream Deck.
  • Form factor & drop-in charging: Using dual receivers keeps the mobile rack much smaller and lighter to move in and out of storage, and drop-in charging bays are much more actor-proof than pulling batteries out after every rehearsal.
  • Massive tuning bandwidth: 138 MHz wide tuning range (G65: 470–608 MHz) offers huge flexibility in congested RF environments.

Pros for Sennheiser EW-D:

  • ~€2,400 cheaper: A massive savings for a volunteer theatre group on a tight budget without compromising raw audio quality.
  • 134 dB dynamic range: Practically eliminates the need to ride or adjust transmitter sensitivity, handling whispers to screams without clipping.
  • Equidistant tuning grid: Zero intermodulation math required; frequencies can be packed tightly and evenly with effortless coordination via the Smart Assist app.
  • Lower latency & metal packs: Ultra-low 1.9 ms latency (vs. 3.2 ms on SLX-D+) and sturdy metal bodypack housings.

My question:

For those who have used both in a theatre environment: Do ShowLink Ease, wired Ethernet/Companion support, and drop-in charging justify the €2,400 price jump for an amateur theatre on a tight budget?


r/CommercialAV • • 22h ago

question Why does Android 9 sometimes work better than Android 14 for digital signage?

Thumbnail reddit.com
0 Upvotes

r/CommercialAV • • 1d ago

question LED panel identification

Post image
25 Upvotes

Hey guys, is there any way to identify this LED panel model/brand without taking one of the modules off the wall? Also, without the vacuum suction tool, how safe is it to use plastic prying tools? Thanks


r/CommercialAV • • 1d ago

question Getting pushback from my vendor/contractor... Can new system do what's required?

2 Upvotes

Hi all,

I'm hoping y'all lovely and kind folks can help me with something. I've replaced everything in a hearing room, and apparently despite my best efforts, the new system isn't doing everything that was required. Before I sign off on "substantial completion" and so on, what do y'all think: with the equipment that was included, can the new system can do what I asked for?

New System Major Equipment

  • CP4N
  • Yealink MVC S98-C5U-004 (TouchPlus, MCore 4, 3x Smartvision 80 cams, AV Hub)
  • Q-SYS Core 24f
  • Etc.

Number one requirement: adjustable camera presets

  • My old system--with 3x Roboshot cams and a CP3N, etc--could switch between the three cams and the five presets for each cam based on which table microphone someone was speaking into, so I required that.
  • We could adjust and save the camera presets via the UI (UIC?) on the touch panel.
  • I gave the vendor screenshot of the touchscreen UI that let us do that.
  • The written proposal and the screenshots of the results of the UI programming appeared to show the new system supported adjustable presets.
  • Upon commissioning, it was discovered that the new system doesn't allow us to adjust the presets.
  • I'm getting serious pushback on the vendor on implementing the feature.

Secondary requirements (that are also currently missing)

  • Note: All of these were requirements because the old system had these features.
  • The new system must switch between the three cameras and camera presets nearly instantaneously.
  • The new system must let us switch between automatic and manual camera control on the fly via the UI/UIC. Note: I gave the vendor a screen shot of the UI/UIC controls that let us do that.
  • The new system must allow the speed, acceleration, etc of the cams could be be adjusted similar to how our old AV vendor could do that on the old Roboshots.

TLDR: can my AV vendor make the new system let us adjust the camera presets (along with the other functions that I asked for)?

I'd appreciate any and all thoughts on this, because my vendor doesn't seem to get the point that these were requirements, they don't seem to wanna budge, and even though I think I did everything that I can, I'm seriously worried out that this is majorly fucked up.

Edit: It's a Teams Room. Someone higher up in my org strongly recommended/pushed for that. I told the vendor that my office was open to using an MTR and other options too.

Edit 2: the total cost was for two identical rooms.


r/CommercialAV • • 1d ago

question G&D, IHSE, and other large KVM systems

0 Upvotes

Looking for user feedback on specifically G&D IP KVM vs IHSE Draco Tera Enterprise (we have currently). Cost to add N endpoints is almost identical to replace the entire thing with G&D IPKVM. Thinking to the future, what options do I have for KVM vendors (fiber transport or IP) that will work well for a medium size broadcast control room. Thanks!


r/CommercialAV • • 1d ago

career Can't find work, its been months, could do with serious advice (NI/Ireland)

3 Upvotes

Hi all

I live in Northern Ireland and been trying to get into commercial and corporate AV for some time now. It hasn't been happening. The AV companies around me are doing things daily, and are busy, but I'm not.

I sometimes work in film/tv doing practical special effects. The problem is, theres nothing shooting and won't be for a considerable period of time. SFX is a department you see on the big shows fully crewed and kitted out... but small regular productions (say, a BBC show) have no need for it.

I've also got workshop experience from this job. I'd prep the kit for shooting, make props, install effects rigs into the set, use industrial machinery and power tools, fitting endless 16a plugs onto cables, all that good stuff!

I've also been a local concert stagehand in my city's arena and music venues for 5 years and this is where my "AV installing" experience would come from. I can run cables, hang lights, build walls and PA, I know what I'm doing and I know what I'm looking at 95% of the time.

But ultimately its dealing with the boxes and carts that touring crews don't want to do themselves or can't because its too big.

I'm a not even a glorified box pusher, just a box pusher. But my skills have went WAY beyond this because I have put serious time and effort and learning into being really good at the job. I even quit drinking entirely (4th year now) so I can be completely dedicated to it, take last minute calls, never hungover, always fresh for the job... but none of that has happened. Feels like a waste now.

I'm 40 and have done dead end jobs all my life. Finally after 5 years found something that I love and I'm actually good at.

But I've sent almost 20 CVs and enquiries to local AV companies and I've not had a single reply from any of them... the part of Ireland I live in doesn't have that many to begin with. I am literally running out of companies to contact. My only option is to try England, and that means moving away from my wife and kids. Its that bad.

What do I even do here? I don't have an AV speciality like audio video lights and I can't get in somewhere to get time with gear. I do know a bit about video tech, purely through a camera hobby and my own reading. I'm lost, severely underemployed and getting angry and frustrated at 0 progress in months. I just push boxes now and I'm starting to hate that job. I am bursting at the arse to move up.

I am sorry for the rant, I genuinely need some serious advice.


r/CommercialAV • • 1d ago

career Professional Growth

2 Upvotes

Hey guys so, I have a question for yall out there. I’ve been doing AV in multiple capacities for about 7 or 8 years. I started out in Live Events and went Corporate and now I’m a Federal Contractor. Before that I was a Lighting Specialist. I’ve worked both as W2 Full-Time and a 1099 Contractor. I’ve held Lead Positions as well as Engineer Positions. I need some professional advice on how to grow from here. I understand that the pathway for a lot of people would be programming or some type of deployment, but I’m not sure. I’m thinking of even going into Networking or IT, as they have complimented AV in the recent years. Any comments would be appreciated.


r/CommercialAV • • 1d ago

troubleshooting Bose CC-64 -- Difficulty Changing Its IP Address

2 Upvotes

I recently commissioned a system with a Bose EX-1280C dsp replacing an older ESP-xx model and (2) new CC-64 controllers replacing older CC-64's. All three pieces were connected to a Netgear GSM4212P switch. I kept getting weird errors in the hardware manager of ControlSpace Designer when I tried to change the IP address of the two CC-64's. Even when I direct-connected my laptop to the CC-64's the same error happened. I even set the speed and duplex of my laptop NIC to 10 mbps/half duplex. I called Bose Professional support and they suggested I try connecting my laptop to the primary port of the dsp, and the CC-64 to the secondary port of the dsp. That worked. Just figured I throw this in here if anyone else has the same issue.


r/CommercialAV • • 1d ago

question Is e-paper a facilities product or an AV product? Who owns room panels that run on batteries?

2 Upvotes

You can’t really judge this from the outside: who ends up owning these once they’re on the wall? With PoE LCD panels it’s clearly AV or IT. With battery e-paper it seems to drift to whoever walks past and notices it’s dead.

Three things I want to know:

  • How battery life holds up against the spec sheet. Joan quotes up to six months for the 6 Pro.
  • What happens when Wi-Fi drops: does it recover on its own, or does someone have to go and poke it?
  • Support burden over a couple of years compared with wired panels

And for MTR rooms: do you ever spec anything other than the panel that pairs with the room system, or is e-paper only for the non-AV rooms?


r/CommercialAV • • 1d ago

question Yealink MeetingBar A50 + CTP25 (Teams Rooms): all Wi-Fi or wired (RJ45) on the same VLAN?

Thumbnail reddit.com
1 Upvotes

r/CommercialAV • • 1d ago

question Site Survey Rollercoaster

0 Upvotes

What are you guys using as a digital site survey tool to capture images, client info, building info, SOW, etc.? We've been thinking about switching away from the current flow as it's a bit clunky. Ideally we need to have a way to create a checklist with images at each stage.


r/CommercialAV • • 2d ago

question AV jobs

3 Upvotes

Is $100k salary good for 5 year experience and managing 3 different locations where your job roles includes meeting support, new room deployments, 50% installation ? It is 3 different roles but company merge into 1 to save $$. Still paying $100k with 5 days Onsite requirement.


r/CommercialAV • • 1d ago

question Has anyone successfully used AirMedia wireless conferencing with INOGENI TOGGLE and Crestron NVX USB extension?

0 Upvotes

Hey everyone,

I'm working on a conference room design and wanted to hear from anyone who has installed or tested something similar in the real world.

Our equipment:

  • Huddly Crew system (5 cameras connected through one Huddly USB Adapter)
  • Nureva HDL410 for microphone and speaker audio
  • INOGENI TOGGLE USB 3.0 switcher
  • 2 × Crestron DM-NVX-360
  • Crestron AirMedia receiver
  • Microsoft Teams Room UC Engine

Proposed setup:

The INOGENI TOGGLE will be installed in the IT rack, receiving USB from both the Huddly Crew Adapter and Nureva HDL410.

  • Host 1: Direct USB 3.0 connection to the Teams Room UC Engine.
  • Host 2: USB connection to the rack NVX-360 (Remote mode), extended over the AV network to another NVX-360 behind the display (Local mode), then connected via USB to AirMedia.

The goal is to switch both camera and audio peripherals between the UC Engine and AirMedia for wireless BYOD conferencing.

My concern:

Crestron support confirmed that NVX USB extension operates at USB 2.0 speeds (480 Mbps theoretical maximum). They also mentioned that using USB extenders for AirMedia wireless conferencing is not recommended.

Before we finalize the design and order equipment, I'd really appreciate some real-world feedback.

Questions:

  1. Has anyone successfully used AirMedia wireless conferencing with USB peripherals extended through NVX, especially with an INOGENI switcher in between?
  2. If you've installed something similar, was it reliable over time, or did you experience camera freezing, audio dropouts, USB enumeration issues, or devices not being detected?
  3. Have you experienced USB 3.0/2.0 negotiation problems when switching between two hosts?
  4. Would Huddly Crew and DSP audio sharing the NVX USB 2.0 connection be a major concern?
  5. If you wouldn't recommend this approach, what alternative switching/extension solution have you used successfully?

I'm particularly interested in actual field experience rather than theoretical compatibility, especially from anyone who has commissioned and supported a similar system.

Appreciate any feedback or recommendations. Thanks!


r/CommercialAV • • 2d ago

question Is on-site event tech support a real person or a phone number?

0 Upvotes

Rentacomputer and fello both have it on their rental pages and I can’t tell from the wording if someone shows up or if it’s a hotline. Anyone had either in practice? Asking because the last time something broke mid-event the “support” was a voicemail box and I’d rather know what I’m paying for this time.


r/CommercialAV • • 2d ago

question Meraive Gen4 thoughts

1 Upvotes

Has anyone here tried out any of the new mersive gen 4 pods? We got one of the Gen 4 mini as a test and it was awful. It's a separate cloud system 1st off, so you can't manage both older pods and new ones in the same system. Secondly the lag between sharing is 2 or 3 seconds (actual seconds and not MS) behind. Tried with both wireless and wired. Couldn't get any native form of screen mirror to work reliability.

Thinking it might have been a hardware limitation we tried one of the full feature gen 4s and it was just as bad.

We talked to someone at mersive recently and they had mentioned they switched from Android to a Linux based system to drive the pods and they were raving about how much better it would be.

Then they changed the licensing scheme so you have to onboard every single one through their cloud, and assign a plan and a license to it. Before you could order with the license and have it applied from the factory.

The API is no longer provided by the device, it's a cloud API and you need to know the device id of the pod to do anything with it, and any sharing to the device is also done through the same cloud system.

My gut tells me the long lag is due to content needing to be sent to the cloud then back to the device, and something I expressed my concerns about to mersive and was told that it was mostly unfounded and the new cloud system was extremely quick and reliable.

They also are offering to buy back old pods 'to have stock for potential warranty replacements' at pennies on the dollar. We have several pods we just purchased last year with the extended license at roughly 1900$. The offer we got was about 1/8th of that. They also told us they have zero gen 3 pods to sell us.

Which brings me to the next interesting thing we learned this week.

One of our vendors was told that if they were going to order any new gen 4 Polaris devices they would need to pay UP FRONT for them and there wasn't really a specific delivery date of when they might be shipping.

Just curious if anyone else is hearing the same thing or has any similarities for mirroring.


r/CommercialAV • • 2d ago

troubleshooting Looking for the VytioZone installer / client for local debugging & testing

0 Upvotes

Hey everyone,

I'm currently trying to troubleshoot and test some things around a Vytio setup (specifically looking into VytioZone), and I hit a bit of a wall trying to get my hands on the client/installer. Since everything on their site (vyt.io) is locked behind partner/client access, there's no public download link available.

Does anyone here manage a Vytio environment and happen to know where the installer is usually hosted on a local deployment, or could point me in the right direction to get a copy for local testing/debugging purposes?

Any help or leads would be massively appreciated. Thanks in advance!


r/CommercialAV • • 2d ago

question Extender USB

0 Upvotes

Hello

I've some video workstation in a rack.
I've the desk at 15m of cable.

For video out I've HDMI fiber cable.

For Keyboard and Mouse wich kind of extender can I use?
A cable with hub like this https://www.lindy.co.uk/usb-c4/usb-extension-c222/12m-usb-2-0-4-port-hub-active-extension-pro-p498/s640?cid=GBP&glCurrency=GBP&glCountry=GB

Or you have other suggestions ?

For USB 3.0 (HDD) aa cable https://www.lindy.co.uk/usb-c4/usb-extension-c222/15m-usb-3-2-gen-1-active-extension-pro-p10396/s10554?cid=GBP&glCurrency=GBP&glCountry=GB or other ?

My best regards


r/CommercialAV • • 3d ago

question Already using a 20x PTZ. What actually made your upgrade worth it?

7 Upvotes

Hello everyone! So I look after AV for a training room at our company. We use it for staff training and occasional talks, with some people joining remotely. There’s an older PTZOptics 20X-SDI Gen 2 on the presenter and a Sony ZV-E10 covering the wide. The PTZ feeds into OBS through SDI capture, and we stream at 1080p.

Before each session I check the presets for the lectern and demonstration table, test the mics, and load the slides. The setup is fairly repeatable. The presenters are less so. Someone usually ends up explaining something halfway between the two positions while I’m checking audio or bringing up their next slide.

The 20x reach already covers the room. What gets tiring is correcting the tighter shot throughout a session. We also save recordings for staff who couldn’t attend, so occasionally settling for an awkward frame follows me into the edit afterwards.

There’s budget to replace one camera, but the current one still works. Tracking and better recordings sound useful. I’m trying to work out whether either would make enough difference to justify replacing it, including getting everything set up and tested again.

Anyone upgraded a PTZ in a similar training room or lecture space? What actually made sessions easier to run, and what looked impressive in the demo but barely mattered once it was installed? Thank yall for any suggestion.


r/CommercialAV • • 3d ago

design request Looking for a Reputable AV Company – Small Sound System Installation (Plains Township, PA)

5 Upvotes

We're looking for an established AV company or professional AV installer to design, recommend, quote, and install a small commercial sound system for our bagel shop in Plains Township, Pennsylvania.

We're envisioning a relatively simple setup:

- A small commercial amplifier

- 2–3 speakers strategically placed throughout the store

- Integration with our existing Mood Media player for streaming music

We're open to professional recommendations on the appropriate equipment and setup to ensure good, even sound coverage throughout the space.

We're specifically looking to work with someone who owns an established AV company or works for a reputable AV installation company, rather than an independent hobbyist.

If you're in the AV business or represent a company that handles commercial audio installations, please send me a message with:

- Your company name

- Your company website

- Your general service area

Ideally, we'd like someone who can assess the space, recommend the right equipment, provide a proposal/quote, and handle the installation.

Appreciate any recommendations or referrals. Thank you!


r/CommercialAV • • 3d ago

career Anybody coming to NAMM in January?

4 Upvotes

I'll be there with BoxCast showing off the RemoteMix product and some other cool new things we're announcing. Would love to connect with anyone!


r/CommercialAV • • 4d ago

question Connector for SDI

1 Upvotes

Hello

I've an install With SDI Cable Belden 1505A.

I'll want to use the BNC connector Neutrik NBNC75BLP9  but I discovered that a special pair of pliers is needed, which costs $500.

Do you use other good BNC with a standard BNC pillers ?