r/livesound • • 6d ago

MOD No Stupid Questions Thread

22 Upvotes

The only stupid questions are the ones left unasked.


r/livesound • • 6d ago

MOD Weekly Office Pictures Thread

5 Upvotes

Yes it's back! Please keep all show and tell type posts in these weekly threads. Unless you have a specific question about your setup, keep those types of pics here. Bonus points if you include a list of equipment with your picture.


r/livesound • • 3h ago

Question Locked out of EQ and forced to reload one static WING scene every week—how do you explain dynamic mixing to a non-technical pastor?

24 Upvotes

I mix at a church on a Behringer WING. Recently, leadership brought in a visiting engineer who wiped and reprogrammed the console to match how our main pastor wants the room to sound. File
Using that file as a starting baseline is fine, but I’ve been told I’m not allowed to touch any EQs or settings—just push faders. On top of that, we are required to reload the exact same save file from October 10th every single service, and leadership told us not to save anything at the end of service because they keep insinuating we’re overwriting the original file. I only save dated show files afterward as receipts, and the board’s timestamps prove the original file hasn't been touched.

Trying to run a live service on a completely frozen scene is causing real issues:
Bullet Instrument & room changes: Different keyboardists have completely different touch, and varying crowd sizes change the room acoustics, which requires small incremental EQ tweaks on individual channels.

Bullet IEM retention: We need to be able to save individual in-ear mixes per vocalist and pack so their mixes actually carry over week to week.

Bullet Baked-in file bugs: Every time we load the 10/10 save, I have to boost the talkback mic gain just so the band can hear it.

Bullet Physical PA issues: Our L/R arrays (3 boxes each) have noticeably less output from the top speakers compared to the bottom two, and our 2-box center array is angled in a way that creates a dead zone right at FOH—so what I hear at the booth sounds completely different from rows 3 and 4.

For those of you who have dealt with non-technical decision-makers micromanaging the console: how did you explain why a static scene doesn't work in live sound, and how did you shift the conversation toward fixing actual PA/system issues instead of blaming the operator?


r/livesound • • 17m ago

Question How to improve monitors for singer

2 Upvotes

Hi everyone! Looking for some advice on improving vocal monitoring.
I work on a country/folk theater production, usually playing venues with 500–1,000 seats. Most of the band uses IEMs, but our classically trained lead singer strongly prefers wedges.
We use the venue’s wedges, so the speakers vary from show to show. Currently, they’re mostly running flat, with some basic EQ adjustments.
The singer feels his monitor sound is holding back his performance, but struggles to explain exactly what’s missing.
What techniques do you use to get a clear, natural and consistent vocal sound through wedges? Any tips on EQ, placement or mixing approaches would be appreciated!


r/livesound • • 1d ago

Question Angry soundguy, why are you the angry soundguy?

171 Upvotes

Over the last 10 years or so ive done maybe a thousand or so shows and I still haven't turned into the jaded angry soundguy, I still remember how shitty it felt as a musician to come to a new place and just feel unwelcome and its still brewing in the back of my head that i dont want to do that to people.

So if you are the angry soundguy, how come?

Reference and also a fantastic video.

https://www.youtube.com/watch?v=LdCLRIA7Ah8


r/livesound • • 23h ago

Gear New project: Virtual Allen & Heath SQ+ running its own firmware (same approach as my virtual WING)

40 Upvotes

If you've seen my virtual WING updates (latest: Update #4), this is the same idea on a different console: a software Allen & Heath SQ that runs the console's own firmware instead of a re-creation. I started it this weekend, and it already boots to its home screen and works with touch in a browser.

Quick recap of the idea
The SQ update file (SQ-6, V2.0.3 r7040). It's a standard Xilinx boot image with the main app, a USB app and the FPGA image inside. The main chip is a Xilinx Zynq (two ARM cores plus FPGA logic), so I emulate that chip and let the real firmware run on it. Nothing in the firmware is patched.

What works

  • It boots like the real thing: SQ+ splash with the progress dots, then the home screen with the "Update your mixer" pop-up.
  • Touch works, through the console's own touch driver. Clicking in the browser goes through an emulated touch controller, and the firmware reads it the way it does on the desk. Tap "Ok" and the pop-up closes. Tap "Brightness" and it opens the Surface Pref page.
  • The screen runs in a web page, like the WING one, with the console's text output underneath.
  • Some code carried over from the WING emulator since both consoles use the same type of ARM processor. Most of the rest is new, because the Zynq's peripherals are different.

What's still limited

  • No audio yet. The mix engine and FX run in FPGA logic (the FX on two separate chips). From what I've seen in the firmware, those parts are program-driven, so emulating them looks possible, but it's a big job.
  • No faders or surface, and no FX engine. The firmware notices the fader board is missing and carries on.
  • It's slow: about 1/80 of real time, so a tap takes a few seconds to show. With the WING I got the console side faster than real time, so I know where to start.

What's next

  • Network support, with the goal of getting SQ-MixPad to connect to the virtual console.
  • Speed. Most of the time goes to the firmware checking a timer over and over, and each check is slow in the emulator.

r/livesound • • 3h ago

Question Live drum recording

1 Upvotes

What is the best combo for recording live drums? My limitation is that I can only choose 5 mics from a typical 8-12 mic set up to record. And I can’t change the position of said mics. Note I use both rack toms

I was thinking: kick, snare (top?), floor tom, rack tom 1, and rack tom 2

OR

Kick, snare, floor tom, OH L, OH R

OR

Kick, snare, floor tom, rack (floor tom side), OH (snare side)

Or something else.

Keep in mind: I can’t change the position of the mics, for instance I can’t put a single over head in the middle. I have to work with the positions of the standard mic setup and just chose 5 of them. The goal is to capture the best drums I can with that limitation. Thoughts?


r/livesound • • 1d ago

Question Waves LV1 Classic tip: Disable the default Shortcut 1 & 2 buttons before a volunteer accidentally fires a scene mid-service

26 Upvotes

What are you guys remapping Shortcut 1 & 2 to on your rigs?

Quick 40-second walkthrough for anyone running or transitioning to a Waves eMotion LV1 Classic—especially if you have volunteer operators.

Out of the box, the two physical Shortcuts (1 & 2) buttons right next to the pages on the fader bank are mapped to Next Scene / Previous Scene. One accidental bump during a live service and your whole mix recalls the wrong scene.

Quick fix (takes 10 seconds):

  1. Go to Setup → Inventory
  2. Under Controls, click the gear icon on LV1 Control (Fader Bank)
  3. Find Shortcuts (1 ★ and 2 ★) at the bottom right
  4. Change both from Scenes to None (or remap them to something safe like a tap tempo, mute group, or layout view)

This is one of the first things I lock down whenever I build a showfile.

What are you guys remapping Shortcut 1 & 2 to on your rigs?


r/livesound • • 1d ago

Question Recording our show tonight, need advice on where to put audience mics

5 Upvotes

My band is getting a multi tracked recording of our show tonight, gonna want to release it as a live album sometime in the future so we're setting up audience mics. Not a huge venue, its a restaurant with a bit of a dance floor, not a huge stage either. I have two Rode M5s that I use for concert taping and its what I got so its what we're gonna have to use. Was wondering if it would be preferable to have the mics on the stage pointed at the audience, or in the audience pointed at the stage? Should they be spaced far apart or would my stereo mount work? I've recorded shows from the audience for the sake of capturing the show, not sure if that would be a similar way to go about recording this


r/livesound • • 1d ago

Question Guide to running monitors?

35 Upvotes

So, I ran a show's soundcheck as a monitor engineer and barely made it through- are there any good YouTube channels that break down the basics of being a monitor engineer? My gain structure was separate from FOH, but somehow it kept fucking me over when I was using sends on fader. It didn't help that I was unfamiliar with the DM7 console I was on, but I really want to take a look back to the basics and figure out what I was doing wrong so I can do the next monitor gig and not feel like an idiot the whole time.

Like, I couldn't even figure out how to set up my cue wedge, cuz I've never needed one at FOH. I wanna learn stuff like that.


r/livesound • • 1d ago

Question RCF KX 32-A - what's the RMS on this box?

2 Upvotes

Hey there. RCF recently seem to have stopped publishing the RMS value of some of their active speakers and instead are just posting the peak output.

For example, the KX 32-A, which is a replacement for the old TT 22-A, is rated on the RCF website with a 3200w peak.

But I'm not really interested in peak ratings. If I want to play music then the peak value is useless to me - if I play something continuously at the speaker's peak, then it will probably catch fire after a few minutes.

I've noticed the peak rating only listed before with some of the NX and ART range speakers, but now it's in their KX range too, which is meant to be their premium range.

So if the KX 32-A has a peak rating of 3200w, then going on previous ratings, the RMS would be 1600w - but that seems very high compared to similar products. And would be a massive increase on the previous 1100w RMS rating of the TT 22-A.

Any thoughts? Thanks.


r/livesound • • 2d ago

Question DM7 Call Light With Stream Deck

21 Upvotes

Does anyone have a solution to creating a call light for FOH to get on comms using the DM7 with Stream Deck? I've seen macros triggered on Digico to accomplish this, but the LED control for the DM7 is only controlable by User Defined Knobs and there is no action for that in Yamaha-RCP. I've experimented with flashing input channel color strips on and off, but it's not impactful enough to notice. Any ideas?


r/livesound • • 3d ago

Gear Made some antenna and volume protectors for Shure PSM900 and PSM1000 beltpacks. What do you think?

Thumbnail
gallery
150 Upvotes

r/livesound • • 2d ago

Question Issues with routing audio through a laptop in a live set

9 Upvotes

For the past year or so, I've been working on this very experimental live set that involves me manipulating live vocal audio signals in various ways, to put it very basically.  There are elements of live looping, but it's more about applying the principals of turntablism to live sound or buffered sound from a live source.  I did initially try to achieve all this just with audio hardware, but it pretty quickly became apparent that I was going to have to route everything through a laptop to achieve my vision.

So here's my issue: ... Okay every time I start to explain the issue, the "post" button greys out and this warning message appears that isn't applicable to me. AI is so frustrating. I'm going to see if I can post the rest of my message in a reply...


r/livesound • • 2d ago

Question SM58...failure.

40 Upvotes

Hi everyone, so I had no idea this could happen, but I have just had an SM58 fail on me. No, it was not dented! It was actually less than a year old, it just dropped in the middle of a gig.

Afterwards I opened it up, and found that everything connection wise looked solid and nothing was crossed. I read about 18 ohms of resistance across pins 2 and 3.

I found a seven year old forum that has helped me do a bit of troubleshooting, but thats about all I could find since these things almost never fail. Before I conclude that it is the transformer, is there anything else that I should check?


r/livesound • • 3d ago

Question Live mixing: Backing track advice

13 Upvotes

Hi.

Had a longer post but not sure of the character limit.

For small local venues. Trying not to overcomplicate and ruin an engineers day.

I am aiming to play guitar and vocals, accompanied by:

Drums (I have access to some unmixed live drums, but wondering if I should use a Drum VST for consistency of sound)

Bass

Guitar layers

Some additional synths, piano, strings, backing vocals

I was thinking that I could play the tracks live from a daw on a laptop, possibly with a small mixing desk to provide outputs for each group for the engineer to mix as they need.

Is this a good way to approach or is there a better way?

I suppose my main question would be, how much control of these elements would you want if you were mixing this?

Are there any absolute no's or things to avoid?

(Should it be all mono, is it better to have a pre-mixed sound or leave the compression and eq to the engineer etc)

Any tricks to convey that live energy when tracks are pre-recorded?

Anything I've overlooked?

Thank you


r/livesound • • 3d ago

Gear Soundcraft UI16 can't press record (not grayed out)

5 Upvotes

Plugged in 8gb FAT32 usb into REC port. Record and play button are not greyed out but I can't click any of them (nothing happens when I click). The sound output is working, just not the record function.


r/livesound • • 4d ago

Question How did we go from The Beatles playing their amps in the middle of Shea Stadium to Line Arrays flying from the rafters and Subs the size of a wardrobe closet?

174 Upvotes

Is there a video on YouTube that breaks down how we went from a PA that looked like an air raid siren in the 50s and 60s to where we are today? (And what was that excursion into the Wall of Sound with the Grateful Dead? Clearly that approach didn't stick.)

How can I, a lay person who occasionally gets to assist with load-in and load-out at large concert venues (theaters, arenas, stadiums) get a basic understanding of the progression of Live Sound Reinforcement? Basic being the key. Thanks! 🤘🏻


r/livesound • • 4d ago

Question Getting over a “bad” show

49 Upvotes

Hey guys!
I’m fairly new to live sound, I started learning basics about sound/tech at the start of the year in class, then started doing liveshows a couple months back. I’ve got ~25 shows by now.

Today I had one, that during soundcheck I felt it was fine, then when the actual show started, there were some real annoying frequencies, but they were spread out enough that I couldn’t get them with the EQ, without cutting out things that we wanted in.

Artist was happy, crowd was overall happy enough, though a couple commented on the sound not being great, and honestly I agree with them. I’m not super down or anything, just a bit annoyed because I felt like I should’ve been able to “fix it.” And because we had a promoter in the crowd, who’s been at two shows I’ve mixed, and the other had a lot of tech-issues, so I’m just annoyed they’ve only seen the “bad” ones lol.

So my questions is: what’s your go to move, after a show you weren’t super satisfied with? Like how do you deal with the meh-feelings?


r/livesound • • 3d ago

Question Live drums mics and recording

5 Upvotes

My band is thinking about recording our live sets using our IEM mixer. For drums, we have just a single mic in the “wurst” position going to our ears. FOH puts all the mics (usually around 8 or so) on the drums that they need.

Since we want to record we are thinking about having FOH route there mics through our splitter. However, we only have 5 spare channels to dedicate to recording drums. Which 5 of the FOH mics should we route through our splitter to get the best live recording? Our drummer uses 2 rack toms btw. I was thinking kick, snare, floor tom, and 2 overheads. Thoughts?


r/livesound • • 4d ago

Question Strange response in system tuning

Post image
12 Upvotes

I just recently tuned a theaters system for the first time. That being said I didn't go in blind, I've been researching how to properly do it for a least a year at this point, so I was confident but this was just the first opportunity that I've had to tune a system. The magnitude came into shape really quick and the space is sounding alright. Except there is a bit of phasing between the left and right main speaker, but I ran out of time to fix it then. That was Monday, but today I actually went and looked at the snapshots in the OSM and actually flipped to the phase graph and it looks strange. There are really strange jumps at like 350 and 16k. I know it's not normal but I don't completely understand what I'm looking at so I just want some help understand it.

I've attached the phase graph and the coherence. This is just on the left speaker, but the space is mirrored, so the other side of the room look similar. The blue line is before tuning and the teal is after I tuned. I didn't set any delays on my main speakers so that's why nothing has shifted too much.

One thing to keep in mind the venue is an old Vaudeville house that has been retrofitted with a Bose sound system. Not great but also not bad.


r/livesound • • 4d ago

Question Engine issues with the DiGiCo SD7

8 Upvotes

I am currently on an SD7 that uses Optocore for all it's connections. I am all of the sudden having issues with engine B. It inexplicably is causing popping and overload on local channels ONLY on the engine B side and is a major issue when mirroring engines. Channels on the SD rack over optocore or orange box don't pop until the console is mirrored. My short term solution is to not mirror but keep engine B updated by sending the session constantly.

The engines also no longer mirror on the first try, board claims the sessions are not the same but mirror on the second try anyway. I really thought this was a clocking issue but everything is correctly set to follow optocore.

I've tried everything but cannot seem to isolate this issue, leading me to believe its a PSU voltage issue on the DiGiCo. DiGiCo rep wasn't that helpful, blamed a dante card that we don't have and said voltages look fine, which is strangely true. Anybody have an advice? I am at my wits end.

If it's relevant this space never connected optocore to engine B, but apparently has never been an issue.


r/livesound • • 4d ago

Question Who's coming to NAMM in January!?

0 Upvotes

I will be there with BoxCast. Would love to connect with some of you guys!


r/livesound • • 4d ago

Question Some thoughts on A&H Qu-3D

0 Upvotes

Hey everyone,

I am personally quite fond of A&H as a whole and am quite excited for the Qu-3D launch. But I do work at a Yamaha-first company. And I don't really see how it fills any gaps.

I mostly think of the Qu-3D as a QL1 in a DM-3 form factor. But there are some disadvantages that the QL1 doesn't have, mainly no secondary Dante.

Let's be upfront first: nobody actually likes the DM-3 but we own like five of them regardless, Why? Because it's a super small form factor for a little conference room on the side somewhere and with like 4-8 mic inputs and maybe a laptop.

The main advantage of the Qu-3(D) as compared to the DM-3 imo is the amount of processing and inputs, but it doesn't really have an edge over the QL1. When we get into the category of more inputs I would like to just have everything in Dante, so I don't have to patch 25 inputs from different devices all over the place to a single point. But Dante for us (almost) always means Primary and Secondary networks, so that one defective copper link can't take down your show.

(continued in comments)