r/Creality_k2 • u/themarkchristie • 6h ago
Troubleshooting Getting jumps in oritns
Looking for some help
Enough glue on the plate, temps are regulated fine and have been using creality pla
Jumps in Prints !!
r/Creality_k2 • u/Creality_3D • Sep 04 '26
Beyond Nozzles. Conquer Materials.
K3 is supercharged with KliTek™
🔹 4.8s nozzle changes
🔹 Multi-material in one
🔹 Up to 5x faster
🔹 Waste-free
Unfolds an all-new chapter in multi-color and multi-material printing.
r/Creality_k2 • u/Creality_3D • Sep 12 '26
Built to take creative freedom to the next level,
K3 brings together five core capabilities to push the boundaries of how you print, combine, and create:
🔹 Ultra-fast waste-free printing
🔹 Mix nozzle printing
🔹 Multi-hardness TPU printing
🔹 CMYK full-color printing
🔹 Native root access
More freedom in materials, colors, nozzles, and control — K3 opens up a new space for creativity.
r/Creality_k2 • u/themarkchristie • 6h ago
Looking for some help
Enough glue on the plate, temps are regulated fine and have been using creality pla
Jumps in Prints !!
r/Creality_k2 • u/jimokachi • 13h ago
I dont know why this error keeps popping up. Ive made sure there is no blockage in the pteg line and cfs. ive cleaned the nozzle itself already. And the sensors are working on the cs and the printer…..this printer is brand new btw
r/Creality_k2 • u/NoDrama3176 • 21h ago
My K2plus worked amazing for the first 60 days and since then it’s been nothing but problems. Creality sends new parts but it always comes back to belt tension issues. My plan was to always have 2 machines. I really wanted the K3 but now I don’t think I trust Creality.
Does anyone here have a Bambu? How do they compare? Did I just get a bad machine?
r/Creality_k2 • u/Firemanlouvier • 1d ago
Thank you everyone for the tips and support. Even the negative. No need to be a fan boy and not love in reality about these things. I do have a few questions as a new user....
1: I notice the print will always start with a have square near the front left of the hot plate. Is that for every print or am I not clicking a button?
2: I have moved the printer up on a table. It is very wiggly when printing, is that an issue? (It moves about 1/4 - 3/8 inch total, so 1/8 - 3/16 from center)
3: I downloaded the creality slicer and saw speed of print, should I be using that right away or wait till I read up on stuff? I am in an apartment now and trying to be respectful to the neighbors..... though real the traffic is louder than the printer lol.
I try and post pictures of the final set up in the comments.
Thank you again for the warm welcome to the community!
r/Creality_k2 • u/Visual_String_3425 • 10h ago
I have a K2 pro with the cfs. When should I think about servicing my cfs. I have changed ptfe on everything apart from the cfs internals. All opinions welcome every day is a school day especially for a technophobe.
r/Creality_k2 • u/Papa_Joel • 1d ago
Sides now have wings to ensure a rigid interface lock. Front vents are now configurable via a sliding shutter. Lid clamps secure the vent to the CFS unit. Lid remains closed enough to not trigger the dryer stop sensor. 5 to 10% RH reduction when the dryer is running and the vent is open.
Still need to develop a way to reuse the roller retention spring and pad.
r/Creality_k2 • u/justanothercog2 • 21h ago
I just received and installed my CFS2 on my K2Plus. I'm running all the latest firmware and print software. It's somewhat close to the Pi4 functionality (which I also own).
- It does not have "auto-drying" which is nice on the Pi4 for keeping the filament in the chambers dry until to use the filament.
- There is no direct control from the display panel. You control it via Print 7. I haven't figured out if it can be controlled from the K2 panel however you can see the setting on the K2 panel.
- You have to fully retract the filament (including out of the feeder tubes) in order to turn on drying. It doesn't want you to be heating the chamber while printing. However, you can have one chamber heating while the other one is printing. Both chambers are individually controlled.
- It seems to play well with the original CFS. I'll be testing that over the next week or two. I've also got a heater upgrade for the original CFS coming in next week sometime.
- It comes with a new buffer and data cables, but they are not needed if you have the original parts. I'm using the original buffer and cables.
- I detached the old CFS and attached the new CFS2, the printer identified it as "number 2" CFS even though I never hooked both up simultaneously.
- When printing heating is turned off for both sides even if one side is set up for drying.
- The CFS2 doesn’t have the tension rollers on the top of the lid. It seems to work as good or better as the original CFS when feeding or retracting.
The thing really don’t like at this point is the lack of “auto-drying” which would manage the humidity until your ready to use the filament (whether its at day, a week, a month…). Having to pull the remaining filament out of the feed tubes is also annoying. I would like to simply have the CFS2 retract the filaments and go into a managed drying mode rather than a timed mode. I think this is simply a software issue that can be fixed with an update. It has all of the Pi4 hardware things needed to do this.
r/Creality_k2 • u/MtnNerd • 21h ago
What buttons do I push to reposition the print bed so I can do maintenance or repair? Pushing the E button just tells me to heat the nozzle.
r/Creality_k2 • u/TyMan2492 • 1d ago
Hello all, while not brand new to 3D printing, am brand new to Creality brands. I just picked up a K2 Combo and during first test print already got an error code CB2565. I’ve followed the steps on the Wiki, which has solved nothing and Creality Customer support seems to just be looping through the same recommendation, of course this happened at 5pm on a Friday, so waiting on a human to get back to me. My machine is showing all sorts of temps for the hot plate in idle or when calibrating. I’ve even had negative temps displayed. It seems to be about a 40 degree temp variation when the plate is tested with a actual thermometer. From what I have read it most likely needs a new hot bed due to the thermostat being fused with it. Has anyone else experience this issue and had a workaround/fix? Or will I simply be out of luck waiting for Creality to honour warranty and ship replacement parts? For now it sits unplugged.
r/Creality_k2 • u/dcv5 • 1d ago
After my last post, I returned my K2 pro to the local store since Creality Support were no help.
They sent it away for repair, replaced the build plates and returned it to me.
Here is the result of the auto levelling calibration. You can see instead of dropping the bed after probing, it lifts it and forces it into the nozzle, when the print head returns it digs into the build surface.
In returned it again today and got a refund.
r/Creality_k2 • u/xXKali_Xx • 1d ago
For people with the DXC 2, if and when the printer detected a stall and primes at random layers. What did you do to fix it from stalling. It's printing pretty flausly at full tension but it keeps burning filament since it thinks it's clogged...
r/Creality_k2 • u/Drseussami • 1d ago
Creality,
I just purchased and received your Creator Status light kit for my K2 Plus, but the included instructions are missing a ton of information. Supposedly there's also a spot in the manual that says to click here to download the official Creality Controller Board Mount, but there is no link to this stl. There are zero instructions on how to pair it to the internet and how to control the light as a whole. Is there supposed to also be a companion app to change the published settings? Can we get a link to this as well? It's a little frustrating to purchase an official Creality product and not be able to set it up. There's not even any mention of this accessory in the Creality Wiki.
Hoping you can chime in, Creality, and provide the necessary information to install this. Thank you.
r/Creality_k2 • u/Ginger_Coroner • 2d ago
I’ve been trying to master my Master Chief helmet on the k2 plus with CR-PETG. At a glance things are looking good, then I see areas where supports attach or places with finer detail and the illusion falls apart
I’m new to printing so I’m not sure how to tell what is causing these issues and I’ve already tried calibrating my filament via temp towers and such. Appreciate all the help.
r/Creality_k2 • u/JustAnotherINFTP • 2d ago
I successfully printed 4 rolls of ASA no problem, but now after a few layers into the print I get F00528. Every single time. I printed in PLA, no problem. ABS, I got the error a few times, then it printed fine. Switched back to the ASA after drying it got over a day, get F00528 again. Any ideas?
r/Creality_k2 • u/Class_Existing • 2d ago
I have had my K2 for 2 months and have printed 300 hours and 2500 meters of filament. Have not really had any issues.
It did an update 2 days ago, and now I can not complete a print. They all start like this. I have tried different filaments with the same result.
Any thoughts?
Thanks.
r/Creality_k2 • u/bubbajms • 3d ago
I got (maybe?) a decent deal on a lightly used K2 SE recently.. I'm thinking it went cheap because the extruder motor had a broken wire, I replaced that and threw a roll of filament on and was off to the races.
The first thing I noticed is at the beginning of the print, it purges out a pretty fair amount of filament before it starts.. probably a 48'' string through the nozzle, and that before the purge line on the build plate that I'm used to from my other printing experiences. That is one of my pics - is that normal?
I'm also not sure about is this chute thing in the other pic. I'm only trying to do one color at this point, so I'm not filling a container with color change bits, but I'm not sure how this is supposed to work. Should there be something in that chute next to the rubberish nozzle wipe, or is the hole in the bottom what I should expect? I've looked high and low for documentation or demo videos and can't find anything.. the pre-print-purge tends to just go through that hole into the bottom of the printer around the plate, unless it bunches up on the side and then makes a pile that ends up sticking to the bottom of the nozzle, which goofs up leveling and then the print if I'm not sitting there watching it so I can stop it. It's weird, right?
Even with this stuff I've been able to get a few prints completed.. I started with a basic model and it did that no problem, and it even did a few larger more complicated prints that I was able to put together fairly easily with the Creality Print software. I did have some stability issues on my last couple of prints, so before I start digging in I wanted to see about these couple of issues.
Thanks in advance, K2 Friends!
r/Creality_k2 • u/JoMoSexua1 • 3d ago
Anyone have thoughts on where to buy holographic build plates? It seems hard to find any with the 260x260 size.
r/Creality_k2 • u/Ordered-Chaos-1273 • 3d ago
This one is general curiosity. Im not talking about thermal grease onto the nozzle before replacing. I already did that however still having the 'Nozzle is heating unexpectedly' so I stripped the whole heater and found there is a little thermal grease between the ceramic heater and the headblock that holds the nozzle. Mine was dried up and virtually none existent.
Figured id try replacing the paste before buying a new heater and after PID tune seems to be doing alright again. Could find anywhere that suggested doing this and this is my 2nd full hot end in 800 hours.
r/Creality_k2 • u/Visual_String_3425 • 3d ago
Why have I got this line every time I do a print. As of the last update, but decided to come up as a gcode error. Of course I'm a beginner haven't quite got to grips with all the technical jargon, but I put my own pants on this morning 🫡
r/Creality_k2 • u/TheAceVenturrra • 3d ago
I have tried to heat nozzle and force it through with no success. It appears to be firmly lodged into this piece of pipe above the hot end
r/Creality_k2 • u/InflationCurrent4288 • 3d ago
Ever since the newest update I’ve been having non-stop filament loading/ unloading issues and jams.
I can’t figure out why it keeps doing this. I’ve tried doing a factory reset but it won’t let me until I resolve the error code. I have already replaced the nozzle as well as took apart the upper portion of the extruder. I do not use my external spool and exclusively use my CFS which has also given me constant issues since updating. Please help.