r/ElectronicsRepair • • 6h ago

OPEN More run down then broken

4 Upvotes

Its a black web cd player with fm radio the model number is bwa17aa003

So radio tuning kinda sucks on this ill try to set it to something and it keeps changing on its own like ill try to set it to 106.1 and itll just go like way to far or go backwards???? is there anything I could do about that? I hope the video shows what I mean honestly it behaved pretty well there normally it takes longer

The volume knob is perfectly fine

Also i have a feeling I know whats wrong motor probably died but I hadn't played it in awhile and I think i mightve dropped it :/ and now the cd player doesnt work is it possible a wire is just loose or something? Or did I royally screw it up

Also am I going to like die if I open this thing up to fix it is there something that'll like blow up yk like crt tvs can do

I've grown attached to this chunky thing so id like to fix it up if possible


r/ElectronicsRepair • • 17h ago

Success Story Repaired my first scope (LeCroy WaveRunner 6050)

Thumbnail
gallery
27 Upvotes

Hey everyone!

I'm really really happy, as I've been able to repair my first scope. For some it may not mean much, but I really looked up to it as a personal and career milestone.

We recently broke a cheap scope at work, so my boss brought his WaveRunner LT264 and we used it for a while. Being his personal scope we had to replace it at some point, but we'd rather make that fun. As soon as we had a bit more free time, we went to a military surplus store, and found this WaveRunner 6050, 500MHz, 5GS not multiplexed, really nice scope but didn't turn on, we paid it 200€.

After a couple days of looking for schematics, probing around and changing components, it turned on! I was in awe when all channels worked fine.

It's still a work in progress, I want to recap the whole supply, find original pots, make a disk copy so we're safe for the years to come and calibrate it.

All in all, I know I actually repaired a PSU, not a scope... but still, I was really overwhelmed with joy when it turned on.

Claude has been really useful to help me find schematics, especially for the power supply which was custom made for Lecroy by a third company, even though it didn't find them itself. I also tried it to interpret the schematics, it seemed to be doing a good job but I quickly found a number of mistakes and logical mishaps.

If anyone's interested I can share all the material I found for this scope.

Edit: unfortunately I'm a dumbass, so I didn't take pics of the supply board... it's still disassembled, so I will if anyone's interested


r/ElectronicsRepair • • 11m ago

OPEN What screwdriver tip set is the most durable ?

1 Upvotes

Hello everyone,
I am looking forward starting to repair stuff after finding it extremely pleasing to fix my Nintendo switch 2. But I see a lot of different opinions on wich material to buy because I want to start easy with simply the screw stuff set and I thought « oh the brand IFIXIT seems pretty good everyone says they are great » but I saw amazon reviews saying they bent easily.

What do you recommend, I try to stay on a budget but if it’s to buy bad stuff that I would have to buy again I would rather put more money in it.

What do I need to start that would last years ?


r/ElectronicsRepair • • 3h ago

OPEN Asking for advice

Post image
2 Upvotes

r/ElectronicsRepair • • 58m ago

OPEN i need advice on this flip phone

Thumbnail
gallery
1 Upvotes

hi! i have this flip phone i gifted my little brother and now the screen goes to white. it keeps making sounds but i can't see what or where's the problem lol. i guess it has something to do with the flex but there's this black plastic thing that won't come out so i'm just guessing.

i'm new at this, i know i can buy another one but i intend to fix this as a summer hobbie (south america)

any help will be welcomed! thanks :3


r/ElectronicsRepair • • 1h ago

OPEN Screen fix

Thumbnail gallery
1 Upvotes

r/ElectronicsRepair • • 1h ago

OPEN Wireless Mouse repair troubleshoot (metal pins)

Post image
1 Upvotes

r/ElectronicsRepair • • 3h ago

OPEN Rotary tool

Post image
0 Upvotes

I have a rotary tool similar to this on the inside ,it was working up until recently last used it a couple of months ago ,now it won't charge no lights or anything how do I check the voltage of all 3 cells together,I've done each one individually think 2 were on about 3.2v the other one might have been 1.2v


r/ElectronicsRepair • • 16h ago

OPEN Can this be soldered or does it need trace work?

Post image
4 Upvotes

Broken CMOS holder. The one side is lifted off. Do it myself or repair shop?


r/ElectronicsRepair • • 1d ago

OPEN My mouse sensor stopped working after 6 years and the fix was super easy

Post image
23 Upvotes

The sensor of my MX Master s2 suddenly stopped working after 6 years of usage. Everything else like buttons still worked. The support was not of any help. Then I opened the case using a small screwdriver and removed the dirt particle that you see in the image of the main board. The sensor works fully again.

Just a small reminder that some problems can be fixed fairly easily!


r/ElectronicsRepair • • 10h ago

OPEN Bricked a Smartlink SL6801 ("Jointbees" / Amazon "Cason" MP3) after an interrupted flash - need the mask-ROM boot strap to reach 301A:2800

Thumbnail
reddit.com
1 Upvotes

r/ElectronicsRepair • • 16h ago

OPEN Brother electric motor diagnosis

2 Upvotes

I'm trying to diagnose this electric motor making a chattering noise. I've done some troubleshooting but nothing has fixed it. Any input or ideas would be greatly appreciated.


r/ElectronicsRepair • • 14h ago

OPEN bought a m18 2954 jobsite speaker and it turns on but dosent play sound

Thumbnail reddit.com
1 Upvotes

r/ElectronicsRepair • • 15h ago

OPEN Anything I can do about this Samsung TV?

0 Upvotes

r/ElectronicsRepair • • 16h ago

OPEN Is it ok to harvest old liquid metal and reuse it? Instead of applying fresh liquid metal

Post image
0 Upvotes

Is it ok to harvest old liquid metal and reuse it? Instead of applying fresh liquid metal

Still shiny but doesnt look clean. Friend’s ps5 not mine


r/ElectronicsRepair • • 16h ago

Success Story Finally rewired and replaced my Alesis qs8 LCD digital piano/keyboard (same for qs7 and qs6)

Thumbnail
gallery
0 Upvotes

In my initial attempt, I used solid 20g wire soldered to the PCB, then plugged directly into the connector of the qs8 cable. This was helpful for testing, but ultimately proved to be an unreliable connection. I ended up cutting and stripping the original cable, as well as the solid wire, then splicing. If you're a visual learner, I think this might make more sense to you for rewiring the pinout.

I'm left with this little guy who reminds me of the cell phone eating robot from FLCL.

I did not connect the contrast pin (pin 4 on the qs8) and 3.3kohms resistor is what gave me the best contrast. Thanks for the support from the people at midiworld.com, forum.crystalfontz.com, and especially this YouTube video youtu.be/XLGYUxwOTuU

This has been one of those projects that I've been procrastinating on for YEARS so a satisfying accomplishment for me.


r/ElectronicsRepair • • 1d ago

Success Story I won the eBay gamble and wanted to share. hah

Thumbnail
gallery
239 Upvotes

I know it's a bit of an older scope, but I bought this Rigol for 100$ in non-working condition. I got it, and it still had its "Warranty void if broken" sticker intact. Got in there and immediately spotted that it just had a completely cold solder joint on the positive terminal of the bridge rectifier. 👀 I probed it, and yep, not a single electron was flowing from the pin to the pad. Absolutely wild! Honestly, would love your input on how this happens. It looks almost mechanically weakened, but it's on the bridge rectifier and every other leg looks fine. (Same with every other joint on the board.). 100$ and about 30 minutes of my time for a fully functional Rigol that normally sells for 300-500$ when working? Hell yes. lol

PS: This scope wasn't even something I was going to work yet so my bench was extra messy because, out of frame, I had something else very apart. ^^; That's why the desoldering iron and all the crap is everywhere.. not that my desk is ever particularly clean. 😅


r/ElectronicsRepair • • 17h ago

OPEN Broken Orba 3 Power Button

Thumbnail reddit.com
1 Upvotes

r/ElectronicsRepair • • 18h ago

OPEN Would it be wise to glue the screen?

Thumbnail
gallery
1 Upvotes

Well, I've had this watch for almost 4 or 5 years. I started go notice that ocasionally the screen would malfunction (sort of when you have an old TV and poorly connect a vga), and eventually realized the screen got separated from the rest of the watch. Any sudden movement can cause it.

The watch works completely fine besides this, but I'm not sure if it's a good idea to glue it myself.

Sadly there are no repair services nearby, so I'm out of luck

If you have any suggestion I'd appreciate it

Edit: I forgot to say, it's a Huawei Watch GT 2


r/ElectronicsRepair • • 18h ago

OPEN Xbox Wireless Controller Adapter shows no signs of life

Thumbnail
gallery
0 Upvotes

I have this Xbox Wireless Controller Adapter that used to work perfectly fine, but now shows no signs of life. It is not detected by the computer at all, and the pairing LED does not turn on. (I've already tried multiple computers and USB ports)

Anyways, I'm curious if I can fix it, I just have no idea where to start. The board looks fine, so I don't know what the problem could be. I have a soldering iron, a hot air station, and I have intermediate micro soldering skills, I just lack the knowledge on how to diagnose this.

Hopefully someone can point me in the right direction?


r/ElectronicsRepair • • 20h ago

OPEN [Xbox Series S] Short Repair

Post image
1 Upvotes

I bought a no power series s hoping to fix it for practice. Never had to find a short before but this seems to be visibly obvious. Looking for tips on what to pull off or check to ascertain the damage.

This is the second inductor down looking at the board from the front side. Can that black chip be pulled off with hot air? From what I can find it's a mosfet chip. I'm sure I'll need the cap too and might have to do some trace repair if it's even possible where it is.


r/ElectronicsRepair • • 21h ago

OPEN Panasonic TX-65HXN888 doesn’t stay switched on

1 Upvotes

My TV shuts itself off at irregular intervals, usually after 20–30 minutes. It only turns back on after I unplug it and plug it back in.

From what I’ve read, the power supply board is a common culprit. I’ve already replaced it, and the TV still shuts off exactly as before, so the board seems unlikely to be the cause.

I’ve also tried a factory reset. It happens regardless of the input source, and the TV doesn’t seem to be overheating.

Has anyone run into this before? What would you check next?


r/ElectronicsRepair • • 1d ago

OPEN [PS5] EDM 03x, changes from BLOD to White light based on UART after clearing error codes (80C00140)

4 Upvotes

Hello everyone, video link to see my status

(youtube.com/shorts/G6GaN1fDmqM?feature=share)

im in need of some direction of where i should continue with my PS5 EDM-03x (i don’t remember the exact number)

Basically i bought this PS5 for cheap with the problem that the PS5 on start went directly on Safe mode as i saw it for myself at the time

Once i took it home it only stayed in BLOD, no video signal, i open it up (still had the warrenty sticker) and went on to plug in the UART

It gave back the 80C00140 and no other errors, once i cleared the error, it went back again in safe mode with the double bip but it doesn’t display video, also even if i’d like to do the process no look, the dualshock PS5 original, doesn’t connect but only charges with orange pulsating light.

The things i’ve done to this PS5 are:

  1. Changing the front ribbon flex cable, i broke it wrongly in the first disassebly
  2. Reflowing the APU liquid metal so it didn’t have no dry spots from being in vertical by the previous owner
  3. Checked controller functionality, reset controller
  4. Checked data transmition, by adding a keyboard to the console and the caps lock lighted up

Basically this PS5 goes from BLOD when i force shut it by long pressing the start button, to white light after clearing the codes with no controller inputs avaiable