Unsolved 2004 Honda Rebel 250, No Spark
I got a free project bike with unknown history and haven’t been able to diagnose my no-spark issue. It’s a 2004 Honda Rebel CMX250C.
I have very little info on this bike, but it seems to be in decent condition. All my electronics work, lights, signals, and it cranks healthy. Battery is good too.
I’m not great with the multimeter, but I checked a few things, like the kill switch and kickstand safety switch, and couldn’t figure out my issue.
Here’s what I’ve measured so far:
Stator/exciter coil (black/red wire): ~65V AC while cranking
Pulse generator: ~111 ohms and 0.35V AC while cranking
Ignition coil primaries: ~0.2 ohms each
Ignition coil secondaries: ~8.61k ohms, similar on both
CDI ground: Continuity to ground
Kill switch: tested and ruled out
Kickstand switch: Continuity to ground with stand up, none with it down
Black/yellow CDI output wire: ~1.1 ohms to ground with CDI unplugged and coils still connected
The CDI was a red one from 2015, and said it was for a Nighthawk. This bike never sparked when I got it, so I replaced that with a cheap eBay CDI for the Rebel and still no spark in either plug, still.
I got a peak voltage adapter to allow me to check the CDI, but I really don’t know what any of these multimeter tests are telling me, honestly. I’m not even sure what I’ve ruled out at this point.