r/Govee • • Sep 29 '25

Frequently Asked Questions

13 Upvotes

There are so many different lights, which one would work best for me?

  • I suggest watching videos demonstrating them on YouTube.
  • While he doesn't review every product, Chris Maher's videos are informative and straightforward.

Do I really have to put those orange cubes on my TV screen?

Why are my immersion lights only showing one color?

  • The default setting upon finishing setup is on All. Choose Part.
  • Alternatively, All may be labeled Solid instead. Choose any option other than Solid.

Which devices are compatible with DreamView?

  • Devices with both Wi-Fi + Bluetooth connectivity are compatible. Devices that are only Bluetooth or only Wi-Fi are not.
  • A sync center such as T2, T3 Lite (also known as 3S in 3rd party stores), T3 Pro, Sync Box 1 and 2 are required for video DreamView, and sync centers cannot be synced with each other.

What can I do about my devices not connecting to Govee desktop via LAN control?

  • Check out this solution here

What are the differences between the camera kits?

  • The major differences are the camera hardware and the amount of LEDs on the light strip.
  • T2: Govee states that the dual camera identifies screen content faster and more accurately. The light strip contains 60 LEDs per meter.
  • T3 Lite: The single camera has an upgraded chip with fisheye lens correction. The light strip contains 30 LEDs per meter.
  • 3 Pro: Matter support, triple camera with HDR sensor. The light strip contains 75 LEDs per meter, with their LuminBlend management system.

Why get a camera kit when the sync boxes exist?

  • While the sync box does work faster and is less intrusive than a camera, not everyone can use it. The sync boxes require a signal independent from the TV. This means if you use the apps on your smart TV to watch content, the sync box is not for you.

Do I really have to put the camera on top of my TV?

  • Good news! There's actually a method to put the camera below the screen. The caveat is that when you add more lights via DreamView, you'll need to visualize the setup upside down when assigning the zones, which requires more concentration/effort.

How many lights can I add to my DreamView?

  • This is dependent on the device.
  • T2: 5 additional devices.
  • T3 Lite: 7 additional devices.
  • 3 Pro, Sync Box 1 and 2: 10 additional devices.

How do I create a DreamView?

  • Open the app. Tap the second icon on the navigation bar at the bottom. Then tap the 4-shapes icon at the top right. Here you can configure DreamViews, Tap-to-Run, and Groups.
  • It is highly recommended that you experiment with these features on the app as a whole. Familiarizing yourself with it will be highly beneficial if you have the time to spare. There are many customizable features for the LED lights that are usually achieved by a more hands-on approach that requires a computer. The features provided on the Govee app would be quite the large decision tree if there was a visual example shown, which is nothing short of impressive, despite it also being a little complicated. To put it simply: just explore the app by tapping buttons to find out what they do!
  • Tip: If your clock is on 12-hr time, please turn off the 24-hour clock setting in the app before you create schedules for your lights. Tap the last icon on the navigation bar, then tap the gear icon at the top right. Additionally, next to settings is a shirt icon; this is where you can change the theme of the app.

The immersion lights on my device are super inaccurate, what do I do?

  • Unfortunately, since every TV is different, there is no one-size-fits-all setting. However, you can start with jumping-off points. For sync box settings, go here.

For camera kits, try the following:

  • Make sure the room is dark to reduce reflections on the TV screen.
  • Reduce saturation, the common choice is all the way down to 1%.
  • Reduce the relative brightness. This is independent from the brightness setting. It's relative to how much light is emitting from your TV screen, which means during dark scenes, the lights will dim if you set the percentage lower. However, if your TV has backlight bleed, this setting won't be as effective.
  • Make sure it's on Part, not All. If the device's software updated, it should show Smooth, Vivid, or Solid instead. "Solid" works the same as "All" and shows only one color.
  • If you are still unsatisfied with the color accuracy, try the AI filter. Once you toggle it on, you'll need to change the preset. Tap the option, then scroll sideways over the sport presets. Under the Default preset, tap Apply.

My TV is 43 inches, can I use a 55-65 inch TV kit?

  • This is possible, but it requires more effort. See here.

I'm experiencing problems with my device, what do I do?

  • Try the search bar in the sub. If you're still experiencing issues, go to Govee's website and navigate to your product. Find the specs, then click the PDF of the manual to find the "Troubleshooting" section. Lastly, reach out to Govee support via the app. Tap the last icon on the navigation bar and tap "customer support" and then choose the applicable option. It is recommended to choose "express replacement" if you think you're experiencing a hardware issue on your device that is within warranty. Please note their warranty only covers purchases directly from them or approved vendors.

Can I advertise my services of Permanent Outdoor Lights installation?

  • Yes, but please keep it in the services thread. New posts of fresh installs for clients will be deleted.

r/Govee • • Aug 06 '25

Outdoor Installation Services Thread

12 Upvotes

If you offer services to install outdoor lighting on homes in your area, please post it here in the comments.

New, singular posts will be removed. Keep it here in the comments so that the people that do want these services can find them, and the people who don't require it don't have to be subjected to the advertising on the sub feed.

If your comment gets caught by Reddit's filters, do not worry and do not spam, the comment will be approved as soon as possible.

As for the people interested in the services, please do your due diligence in the vetting process.

Thank you.


r/Govee • • 44m ago

Bravo Rock⭐️

Thumbnail gallery
5 Upvotes

GTA6 is a Govee tester.


r/Govee • • 20h ago

Second layer under garage

Post image
59 Upvotes

I didn’t like how the top layer was casting a shadow on the top half of the garage doors. So I added a second layer!
Prism lights


r/Govee • • 4h ago

Tips Deck / Fence Light Installation

Thumbnail
gallery
2 Upvotes

Just about done installing some deck lights (using them on our fence instead) and was just looking for some feedback on my head-end work and wire management. We’re probably going to put these on our deck after winter so I’d like to see where I could do better next time around. I’ve still got some wire management work to do around the boxes but it’s minor.

My biggest gripe is that I feel like I ran the electrical box up a little too high, but I didn’t want to constantly bend down to plug / unplug everything. I also wanted to keep it safely above any yard work (once the grass grows back). Probably could have come down a foot or so, but oh well.

Conduit is all schedule 80, electrical wiring is db rated, and the box is siliconed and sealed up. I should have used an expansion joint coming out of the ground with the conduit but hopefully the frost heave isn’t terrible this winter and I can correct that oversight in the spring.

I used UV rated split wire loom and UV rated screwable zip-ties to secure the wiring under the fence rail so it’s tidy, protected, and as out of sight as possible. The only thing I really wasn’t sure how to address was the connection points at the end of each line. It would really be nice if there was a few extra inches of slack on that end but I did the best I could and just popped that section above the light and flipped the wiring down and under since I couldn’t really secure it under the fence rail the way I wanted.

Thoughts on improvements for next time are very welcome! Thanks in advance!


r/Govee • • 1h ago

Govee elites question

1 Upvotes

Wife bought the Govee elite 150 foot kit from Costco.
We have a two story house and two roof lines. I will have roughly 29 lights on the lower run then have to cut and splice to get to the second floor. And 26 lights on top.

Will this work with the elite set?

Thanks a bunch.


r/Govee • • 6h ago

Setup Question Govee lights for reading behind a bookcase?

2 Upvotes

i want some soft light behind the bookcase next to my sofa for reading in the evenings, not really after flashing effects. budget is about $100 and being able to dim them low matters more than loads of colors.

who's had their Govee lights for 3 years and is still happy with them? i'd rather get something people still use every day than pick whatever looks good when it's first set up.


r/Govee • • 3h ago

Setup Question Christmas Scene for Govee Net Lights

1 Upvotes

I bought the Govee Net Lights (model H8811) because the box said it came with 64+ scenes (Christmas scene was pictured on the box). I used the app LED Light Controller Home for the setup, but none of the scenes available are Christmas related. What app are you using to get the Christmas scenes?


r/Govee • • 4h ago

Discussion Govee Permanent Outdoor Lights 2 Pro – Installation Distance from House? (Photos Appreciated!)

1 Upvotes

For those of you who have installed the Govee Permanent Outdoor Lights 2 Pro, how many inches away from the house did you install them?

If possible, I'd really appreciate seeing some pictures of your finished installation!

I'm trying to find the sweet spot that provides a nice balance between:

- Minimizing the hotspots at the top of the light cones.

- Maintaining the distinctive two-layer color separation effect that makes the 2 Pro unique.

- Getting an overall clean, balanced lighting effect across the house.

I've seen different recommendations for installation distances, but I'd love to hear from people who have actually installed them and see how the results look in real-world photos.

How many inches from the wall did you install yours, and are you happy with the results?

Thanks!


r/Govee • • 8h ago

General Question Multiple C9 strands

2 Upvotes

Hello, Is it possible to join 2 50ft c9 strands together so that I only have to use 1 outlet? I know I can group them, was hoping to daisy chain them together. Is that possible ? Thanks


r/Govee • • 9h ago

Setup Question Opinions for install

Post image
2 Upvotes

I just purchased Govee Outdoor Pro lights and I am planning my install. I have wide soffits around 95% of my house and bought clips to screw into the soffits everywhere for a truly permanent install.

However there is one section of my roofline with no soffit. The only real option I see is to attach the lights to the underside of my gutter. I live in South Dakota so we get very cold winters and pretty warm summers. I don't think the glue or sticker tape will hold. I could screw into the gutter, and seal the screw holes with silicon, but I don't think that is the best option. What do you guys think?

I attached a picture. The area is on the top right section of my 2nd story roofline. Thanks for any advice.


r/Govee • • 5h ago

Any way to fix this in Dreamview?

Post image
1 Upvotes

I'm feeling a little disappointed in these led strip 2 pro lights, there's no blending whatsoever between zones for some reason. For context, I had the cheaper led strips on before and they seemed much better, but there was no white light ability and I didn't like the blue tint they always had when the TV was white. I have the TV backlight 3 lite and it works perfectly. The scene on TV at this time was just a regular TV show and my strips are mapped to the far left and right zones in Dreamview, 11/20/19 and 14/15/16. These zones map colors better than the closer zones, and there's still the hard color separation between segments in the closer zones anyways. These are 16.4 ft strips wrapped around the outside of the bookshelves, Dreamview only allows 6 segments to map which is probably the issue.

Just wondering if there's some setting I missed that will allow the segments to blend color like the TV backlight strips, or if this is just a limitation of dreamview.


r/Govee • • 22h ago

Black Friday pro light installed

Post image
22 Upvotes

don’t roast me for the obvious mess up. i’m not going to tell the wife and hope she never notices (she hasn’t yet)


r/Govee • • 7h ago

General Question Can this be turned into a table lamp?

Post image
0 Upvotes

Recently purchased the uplighter floor lamp and was curious if it could technically be turned into a floor lamp if the bottom 3 pipes were cut carefully. I think it could be really cool as a table lamp so I'm just curious if anyone has ever tried this.

Thanks!


r/Govee • • 10h ago

Discussion Govee app timer doesnt seem reliable anyone else?

2 Upvotes

my light bulbs dont always turn on/off based on the in app timer settings.


r/Govee • • 21h ago

Showcase My 2 pros are finally up.

Thumbnail
gallery
14 Upvotes

I am finally finished and I'm quite proud of myself. Installed at 4"


r/Govee • • 12h ago

H60A6 firmware 1.00.48 breaks LAN control. Lamp freezes after receiving a LAN command. Anyone else?

2 Upvotes

Hi all,

I want to warn other H60A6 owners who use LAN control, and find out whether anyone else is seeing this.

**Setup**

- Several H60A6 ceiling lights, all with LAN Control enabled in the Govee Home app

- Controlled locally from Home Assistant through govee2mqtt, which uses Govee's official LAN API (UDP)

- Everything had worked reliably for months

**What happened**

On the night of 21–22 November one of my H60A6 lights updated itself to firmware **1.00.48** (hardware 1.04.03). I didn't start the update; it seems to have installed automatically. LAN control on that light has been broken ever since:

- The light still answers LAN **status queries** (devStatus) and reports its state correctly.

- It **ignores LAN control commands**. On/off over the LAN API does nothing, and govee2mqtt logs "timed out waiting for status" for every command.

- Worse, **after each LAN command the light freezes for a while**. During that time the Govee Home app can't control it either; it shows the light turning on, but nothing happens. Once it got completely stuck and only recovered after I cut the power at the wall switch.

- So from Home Assistant it looked like the light "kept turning itself back on" after I switched it off. HA showed it off for a moment, then the next status update reported it was still on.

**Comparison**

Another H60A6 on the same network is still on firmware **1.00.41**. It receives the exact same LAN commands from the same controller and works perfectly. The only difference I can find is the firmware version.

**Workaround**

I turned **LAN Control off** for the affected light in the Govee app and restarted govee2mqtt. It now controls the light through Govee's cloud API instead, and on/off, brightness and effects all work again. The downside is a bit more latency and a dependency on Govee's servers.

**Questions**

  1. Is anyone else on H60A6 firmware 1.00.48? Does LAN control work for you?
  2. Have you seen the same thing on other models after a recent update?
  3. Does anyone know how to stop automatic firmware updates, or roll back to an earlier version? My other H60A6 lights haven't been offered 1.00.48 yet, and I'd like to keep it that way until this is fixed.

I've reported this to Govee support and will update this post if they reply.

**Tip for HA / govee2mqtt users:** if a Govee light suddenly stops obeying commands and keeps reverting to its previous state, check its firmware version in the Govee app. Turning off LAN Control for that one light is a quick workaround.


r/Govee • • 18h ago

WLED Conversion Settings for Govee S14 Bulb Outdoor String Lights 2 RGBICWW

2 Upvotes

This took a minute to figure out, so I wanted to include the info for anyone looking to convert these lights to WLED. Each bulb has 2 LEDs inside, possibly RGB+W I found that out because on WS2811 the length count was double and when it was an odd number the colors worked properly.

These settings worked for me.

  • 24V 2A PSU into GLEDOPTIO Elite 4
  • LED Type: FW1906 GRBCW
  • mA/LED: 55mA (WS281x)
  • Color Order: BRG
  • Swap: None
  • Length: 15, 30, 45 (matches actual bulb count)

For whatever reason, I had to swap the polarity on the 3-pin cable to get it to work. But the color output is vibrant and matches the OEM Govee controller very well.

https://imgur.com/a/UOTWUIL


r/Govee • • 5h ago

Permanent Outdoor Lights

0 Upvotes

This may be unpopular but the look of the permanent outdoor lights is terrible. Those should not be on a home. They look cheap, not cool. These are the worst products Govee makes. I feel like they look how it does when someone spray paints their car to try to fix the paint. Light, especially on that scale, should be organic and pleasant, with some thought.


r/Govee • • 1d ago

Pro install is complete

Thumbnail
gallery
128 Upvotes

I installed Govee Pros using the Bear Light Studio aluminum tracks. Thanks for the suggestions and advice!


r/Govee • • 18h ago

Net lights scene problem

1 Upvotes

Last Christmas, I bought the net lights. I set up a set of scenes for Christmas for it to cycle through. Worked great. (Using auto run)

Halloween this year, did the same thing. Got a handful of Halloween scenes set up for it to cycle through worked great. (Using auto run)

This week, put the net lights up and I’m manually selecting the pre-set thanksgiving scene and it keeps automatically switching back to my Halloween automation even though the Halloween automation is turned off. Power isn’t being cycled, nothing else has been done. Firmware is up to date.

Any guesses?


r/Govee • • 23h ago

Backlight Pro 3 BF?

2 Upvotes

I’ve been waiting for months for the backlight 3’s to go on sale so I can buy a few for my home. Seems like this is the only item not to go on sale, is this normal? Should I wait or just buy the non pro version? Looks like the T2’s are no longer for sale either

Edit: thanks for the comments, I ended up getting several of the non pros. Maybe down the line I’ll get a pro if it goes on sale


r/Govee • • 19h ago

Setup Question Looking for suggestions

Post image
1 Upvotes

Hello, I am planning to install Govee Permanent Outdoor Lights 2 Pro on my home in the next few weeks. What would be the best course to run where I plan to put the lights (red) between the different sections of my roofline? I also plan on putting them around my garage door frame.


r/Govee • • 22h ago

Outdoor Plug Suggestions

0 Upvotes

Has anyone used the smart plug outdoors? Or think it’ll be safe to plug one in if I have it in an enclosed case.

I’m really sad that they discontinued the 3-in-1 outdoor plug.