r/HomeServer • • 20h ago

I'm a server

Post image
593 Upvotes

r/HomeServer • • 11h ago

Finally finished building my home lab

Thumbnail
gallery
68 Upvotes

My home lab setup

Right rack:

  • ZimaBlade running OPNsense (firewall/router)
  • 2x TP-Link TL-SG108E 8-port managed switches
  • 3x Hyper-V nodes: HP EliteDesk 800 G3 Minis
  • 3x Proxmox nodes (cluster): HP EliteDesk 800 G3 Minis
  • Noctua 40mm fan at the bottom

Left rack (NAS):

  • TrueNAS on an ASRock N100M (Micro-ATX) motherboard with 4 SSDs and 2 SATA drives
  • 2x Raspberry Pi 4 running my secondary NxFilter, secondary dnsdist, and Homepage
  • TP-Link 5-port unmanaged switch
  • Power strip (forgot the model, got it from Amazon)

Remote management: The EliteDesk 800 G3s support Intel vPro/AMT, so I run MeshCommander on one of the Pis. I get remote KVM, power control, and BIOS access even when the OS won't boot.

Hyper-V nodes:

  • Node 1 (64 GB): the main server. Runs BookStack, the domain controller, dnsdist (in HA with the one on the Pi), Dockhand, Immich, NxFilter, Plex, Shinobi, and some torrent stuff.
  • Node 2: 32 GB
  • Node 3: 16 GB

What's next:

  • Node 1 runs almost everything right now. I plan to spread more VMs to the other nodes, including Veeam for replication between nodes (I think I have enough storage) and a secondary domain controller.
  • TrueNAS has no redundancy yet. I'm not sure how I'll handle that, and I'm not buying anything at current prices.
  • The firewall has no backup yet. The plan is a second OPNsense as a VM on one of the nodes, paired with the ZimaBlade using CARP. Since I only have one public IP, the WAN would run through a VLAN on one of my existing switches, and the backup takes over only if the ZimaBlade goes down.

I've been doing this for a while. I just built what made sense to me. If you see something I'm doing wrong, or you have any suggestions, I'd appreciate it. Thanks!


r/HomeServer • • 1d ago

Crazy find for $13

Thumbnail
gallery
899 Upvotes

2tb ssd 6tb hdd a ryzen pro 7 2700 and a nice little gt 730
It was $25 but it was 50% off. Thrift stores can be crazy sometimes. Best find ever prob worth like 300+ nowadays.


r/HomeServer • • 14h ago

Gpu config for dell t7910 with dual 2697a v4 xeons, 108 ecc reg ram?

Thumbnail
gallery
3 Upvotes

I got a Dell t7910 with dual 2697a v4 xeons, 108 gb ecc reg ram (used all 16 dimm slots) and it has its og 1300 watt psu. I was thinking of doing some local models, maybe a cloud storage thing since it has 4 drive bays, home control/lab, just you know the basics. I'm stuck on what I want to do with the gpu setup. It has decent space for multiple gpus, and alot of pcie slots. Just curious on what everyone thinks! I'm pretty new to this so whatever u say won't hurt my feelings lol. Also peep the 2nd t7910, another project lol.


r/HomeServer • • 13h ago

Do I need a NAS HDD for a NAS?

0 Upvotes

I am planing to build a NAS, with 2-4tb of storage and backup drives but NAS drives are more expensive new and way more expensive used so I was wondering If it actually mattered if I used a NAS drive.


r/HomeServer • • 14h ago

Synology NAS vs NAS + (mini PC) vs PC build doing everything

1 Upvotes

Hey everyone, longtime lurker here.

Current setup: Synology DS1520+ (CPU: Intel Celeron J4125), RAM upgraded to 3 x 12TB in Synology Hybrid Raid 1 (so around 20TB usable storage, with 1 drive redundancy).
Hosting stuff like: Plex (with Plex Pass, hardware transcoding through Intel Quicksync), Homepage, Dockhand, Gluetun, Qbittorrent, Jdownloader, Komga, Kavita.

  • Been experimenting with Immich, but big imports choke my NAS's CPU.
  • Been wanting to install PaperlessNGX, maybe with the bells and whistles of being able to search through the documents through a search bar.
  • Been wanting to try and use handbrake to make my movies and series.
  • Been wanting to experiment with the arr stack, and automating my media library some more.
  • Been wanting to stop using my Synology NAS for 'computing', and keep it for what it's made for: storage. Or even stop using it as main storage, and just use it as backup.

I have some PC parts lying around from my previous gaming pc, which I haven't gotten around to selling yet: an Intel i9 9900k CPU, a Z390 motherboard (Asus ROG Maximus XI Code) and 32GB (4x8GB) DDR4 RAM, 1000W PSU.
So I feel like my options are:

  • Build a PC with those parts. I'd be using Unraid on it, for ease of use, even if I won't use the PC as a NAS (at first?).

    • Pros: I already have the parts. More power for stuff like Immich, PaperlessNGX, handbrake, light local AI models(?), future stuff like game servers or anything. I could add a GPU later if really needed. I can use the PC as computing unit, leaving my NAS to do the fileshosting. If I'd want to get away from Synology entirely, I can expand the PC into a fullblown NAS (maybe a Jonsbo NAS case?), it will already running Unraid anyway, and either sell the Synology NAS or keep it for backups.
    • Cons: Machine itself would have a bigger footprint (ATX Tower case). CPU, PSU (and RAM?) are probably overkill. Power draw might be an issue, although I have found a Reddit post of a guy massively underclocking it: https://www.reddit.com/r/buildapc/comments/wi7uhk/intel_9900k_underclockingpower_limit_experiments/.
  • Sell the PC parts and buy one of those mini PC's with Intel N100, or one of those refurbished office PC's with an i5 8500T, i7 8700T, i5 9500T, i7 9700T.

    • Pros: Small footprint. Probably enough power for the things I wanna do (for now?)
    • Cons: less expandability, cost of buying a new device (would be offset by selling my existing parts though).

Any advice? I don't want to have too much work keeping everything running, but I also feel like I could use some more horsepower. Is a PC + my Synology NAS, the best of both worlds, the best thing in my situation?


r/HomeServer • • 16h ago

How do you find out when something in your homelab is slowly going wrong?

1 Upvotes

Hi all, I'm a student developer researching how people notice slow problems in their setups, like a disk getting warmer, a service getting slower, or a battery or power reading creeping up, before something actually breaks. I'm not selling anything and have no product to link.

A few questions if you have a minute:

  1. How do you spot problems like this today (Grafana alerts, Uptime Kuma, scripts, just noticing)?
  2. What's the most annoying thing that went wrong that you only noticed too late?
  3. Have you tried building something for this yourself, or using AI to do it? How did it go?
  4. Would you ever pay for a tool that did it for you, and roughly what would feel fair?

Happy to read any answer, even one line. Thanks!


r/HomeServer • • 21h ago

Setting up Jellyfin server : i5-4460 or Ryzen 5 2600?

0 Upvotes

Apologies for yet another question on specs, but I’m having a bit of a time figuring this one out.

The equipment I have on hand for this project :

• i5-4460 and motherboard

• Ryzen 5 2600 and motherboard

• 16GB DDR3 and DDR4

• GTX 1650, no additional power needed (PCIe powered)

• Like a bunch of HDDs

This server is for backups of files and Jellyfin streaming. I’m just stuck on whether or not to go DDR3 or 4, as whichever I don’t use I could either sell or send off to a friend.

In your experience, which build would be best?

Thanks everyone!


r/HomeServer • • 1d ago

Home server setup

Post image
30 Upvotes

Running plex, immich, pihole, and tailscale.

Ryzen 7900x

32gb ddr5

8tb total hdd

Also has an rx9060xt for gaming.


r/HomeServer • • 23h ago

Next upgrade recommendation

0 Upvotes

Hello I need some recommendation for my home server. I'm currently hosting Jellyfin, tailscale, photo/ file backup and a game server. I'm using Zimaos because I'm a beginner and I just want it to work (which it does).

I'm currently rocking these specs:

Cpu: r5 2600

Ram: 4gb x 4 sticks @ 2400mhz

Gpu: rtx 2060

Drives: 240gb SATA SSD + 12tb hdd (ironwolf)

**I know alot of people are going to suggest a another 12tb for redundancy, but I don,t have much on it and planning on adding a 2nd soon.**

I want to know, if the game server that I'm running is factorio (w/ space age dlc) should I upgrade the cpu or ram? From what I've seen, the cpu should be the answer but I'm unsure. My budget would be below 200$ CAD and I'm open to buying used. My 2 options are either a 16gb ram @ 3000mhz (that would replace my 2nd gaming rigs ram which are 32gb @ 3000mhz and the 32gb would go in my home server) for around 100$ used or a 3700x / 5600x for either 150-200$.

I've asked ChatGpt and it answered me mixed results.


r/HomeServer • • 23h ago

I need help building a home server

1 Upvotes

Hi I built a custom AI that runs my home but at the moment everything is running on my personal PC but I don't want to leave my PC running 24/7 because I use it for games and other person things as well

So I want to build a dedicated server to run my AI and home assistant but I don't know where to start

How do I build a server is there specific components to build or do I just build another PC to host everything???


r/HomeServer • • 23h ago

If I am travelling or far away from the server, can I access the services of it?

0 Upvotes

Hi,

lately I became interested in FOSS things and I got into server making. Although, I am curious about one thing. If I am far away from the server, because I am f.e. travelling, can I still access the services of the server?

I am a noob, so that is why the question is like that. I would be glad if someone helped me with that 🙏


r/HomeServer • • 1d ago

Remote power interrupts, yes or no?

1 Upvotes

So I made a ZimaOS server from an old computer. I can power off the server remotely through the zima client but for remote power on it looks like the easiest way to do it is a power interrupt with a smart switch I can access remotely.

My question is that given I turn off my server every night, and that the server is shut down when I do the power interrupt to turn it back on in the morning, is this going to damage the hardware or cause other issues having a power interrupt every morning? Or is a wake on lan setup going to be better?


r/HomeServer • • 1d ago

On macOS, what software / method mounts the fastest network drives? (accessing drives of other devices in Finder)

2 Upvotes

I have devices connected to my Mac via Thunderbolt networking: thunderbolt cables from my mac to the device, which use my own pre-assigned IP addresses, and get speeds of up to 40Gbps between (tested with iperf3). I think software is the bottleneck.

When I download many images or videos into a folder on my mac drive, and open it in Finder, it generates dozens of thumbnails instantly as I scroll down, generating them before I can even take a look.

On another PC I have a webdav server running with rclone, and I mount it to my mac also via rclone (using the thunderbolt IP address). Image thumbnails take much longer to generate and I have to wait.


r/HomeServer • • 2d ago

Turned an old, GPU-dead laptop to my first homeserver :)

Thumbnail
gallery
79 Upvotes

I had an old Acer Predator Helios 300 (2018), whose GPU died during Covid, lying around- so I decidded to convert it into a homelab at my parents place - I manage it using tailscale.

Specs

  • i5-8300H, 8 GB RAM, Ubuntu Server (the dead GPU gets disabled at boot)
  • 128 GB SSD for the OS and Docker
  • 2 TB USB drive for media and photos
  • 1 TB drive I found lying in storage, now inside the laptop as the backup drive (restic, nightly)

It runs Immich, Jellyfin, AdGuard Home, Syncthing, Samba, Uptime Kuma, Speedtest Tracker, Dockge, and shares the printer over the network.

Everything is displayed on an old tablet I had gotten with a pyramid scheme of a study-package in 10th grade. And yes, that is just electrical tape holding the ethernet cable in place - I really don't remember when that port became finicky.

The config is all on GitHub, and the server pushes it there by itself every night: https://github.com/akshit-a9/my-homelab

Even though it comes nowhere close to homelabs here, I hope to get there in time. Do lemme know if you have any suggestions on what to improve or add, especially for backups, since there's no off-site copy yet.


r/HomeServer • • 2d ago

help? server freezing at bios after adding storage

1 Upvotes

Hi! i’m not sure if this is the correct place to ask for help but i’d love some insight if anyone has any!

So i frankensteined an old gaming pc into a server my current build is

Motherboard: ASUS M5A97 (just updated bios to current best, like 11/2012)
CPU: AMD FX-8120
RAM: 16GB DDR3
PSU: 500W Thermaltake
Graphics: 1050 Ti
Storage Current: 3TB HDD (2+1 raid 0 atm)
OS: Unraid
Server used only for media

i got 2 4TB hard drives and when i plug them into my pc and turn it back on i get stuck on the BIOS loading screen, the pc won’t continue to boot or if i press delete to go into bios settings nothing happens.

troubleshooting i’ve tried:
different sata ports
made sure all ports were enabled in bios
ran long smart check on both new drives on my main pc, they came back good
updated bios
(not smart but) will boot when only power is plugged in, i did hot plug in sata and they showed up in my unraid that way. so my issue is occurring somewhere in boot i think?


r/HomeServer • • 3d ago

Windows to Ubuntu home server noob, planning a bigger build. Need advice on way forward.

5 Upvotes

I had always wanted to get a home server up and running, especially one that can talk back or reply on command, kinda like Dexters Lab’s Computer or JARVIS (for the MCU fans), even had parts bought over the past few years but never got into it (got Plex lifetime back in 2021 and finally using it). Got some second hand parts set up the below:

Current setup: i5-10400, B460i, 16GB DDR4, 2×16TB IronWolf (still NTFS) and a 250GB SSD for the OS, all in an NR200. I switched from Windows to Linux a few weeks ago, and it's my first time using Linux. It runs Plex, the arr stack, qBittorrent, Immich for family phone backups, Uptime Kuma and Docker. I also have an M2 MacBook Air working as an always-on Ollama box over Tailscale, and I'm tinkering with a local voice assistant to help with daily management task. Have a dual ISP/network set up for almost 100% uptime and segregated my bandwidth usage across apps.

Plans: I want to move to a Core Ultra 5 250K Plus on a B860 board with 32GB DDR5, an ASM1166 SATA adapter, and a spare 3070 Ti for occasional AI work. The long-term goal is 100TB+ added one drive at a time.

Biggest challenge I am facing now is a proper case. I kinda wanted something like a Jonsbo n5, which can fit my existing card and also hold 12 HDDs; but shipping is almost as much as product price. Alternatively, can’t find a case that fit big gpu + a good number of HDDs; at least not available in my country (Bangladesh).

Suggestions on what I can improve would be highly appreciated.


r/HomeServer • • 2d ago

What's the best/easiest way to switch from Windows running my plex server to a Linux based OS?

1 Upvotes

So Ive had plex running on a windows PC for a while now, with 4 different hard drives (1 SSD that has the OS, and 3 HDDs, 2 4tbs and 1 16tb) with just the the files on the hard drives, not set up as a RAID of JBOD Pool. I would like to switch over to ZimaOS, as theres other things Id like to do with the server other than JUST being the dedicated plex machine its been for the last 5 years or so. But whats the best way to switch over? Will I need to reformat my actual media drives or just my OS drive? Ive backed up the plex data folder at the very least, as I would hate to have to redo all the hours of metadata work after a fresh install. Ive never really used Linux, but after doing some research I think Id like to try ZimaOS, and Id like something that can take advantage of Docker, as it seems like everything uses it, and its finicky with windows.


r/HomeServer • • 2d ago

Is NAS really more private than Google and MS?

0 Upvotes

One of the big arguements for NAS is the privacy of the cloud storage away from big tech companies like MS and Google.

If I were to purchase a NAS, it often comes with its own priprietary indexing software. Is the privacy part any different from a big tech cloud provider then?


r/HomeServer • • 3d ago

First time building a home backup server

0 Upvotes

Hi!
After breking my phone and loosing 3yrs worth of pictures, I decided it's maybe time to setup my own backup/personal server. My budget for the machine is ~200 euro (without hdd), to which I was thinking about adding between 4 to 8 TB of storage (RAID5 or just mirroring).

I have a couple of question:
- I was looking for old Optiplex, in Spain you can find intel gen > 8 and 16gb ram starting from 160 euro. With current RAM prices it doesn't seem that bad, but what machine would be better in this price range?
- For HDD, I was looking into second hand SAS drives as they are much cheaper than SATA on second hand or refurbished websites (less lifespan probably too). What is your experience with those?
- Most Optiplex or Lenovo I have seen are SFF, so they fit only 1/maybe 2 3.5 hdd, but I saw they are very popular anyway. What is a good solution to host them outside the case? Do you use external HDD enclosures with USB connection and external power?

I haven't thought too much about software, probably it's gonna be a debian distribution with btrfs/zfs but it depends on the kind and quantity of hardware I buy.
What would you change in this?


r/HomeServer • • 3d ago

vulnerability found in my home server setup

0 Upvotes

I recently discovered a vulnerability in my home server setup that I want to share. I was using an outdated version of Nextcloud for file storage, and turns out there was a security flaw that could let unauthorized access.

I immediately updated to the latest version and set up some extra security measures like two factor authentication and regular backups. Has anyone else run into this kind of issue? What steps did you take to secure your home server after finding a vulnerability?


r/HomeServer • • 3d ago

Test machine off eBay - No DDR5 on hand

0 Upvotes

I bought a stripped Lenovo ThinkCentre M90q Gen 5 i7-14700 2.10GHz from eBay, and although seller has good reviews and they tested working, I still need to test this myself of course.

However, I do not have any SODDIM DDR5 on hand, and honestly don't know anybody with it. I am a programmer, but never really dabbled into PC parts or hardware. Given that RAM prices are quite high, I bought this machine for a good price, and was going to wait on RAM knowing I would run into this predicament. This post is me asking for any advice for a novice.

Any advice or guidance is appreciated. Do i just bite the bullet and pay current market price (from retailer? eBay?), do I just buy from BestBuy and return after testing.

Thank you very much!

EDIT: Eventual goal is 64gb for my dev wortkflow + homelab. Should I just buy? Regardless, in the next year I'll have to for dev work.


r/HomeServer • • 5d ago

Reality of building a home database

52 Upvotes

Not sure if this is the right place to ask this question but here goes:

I want to build an offline database for myself. Basically a program where I can store, track, monitor, trend, etc, all aspects of my life. Health, fitness, finances, legal, etc. basically a digital file cabinet. Go to the doctor and get bloodwork done? Upload it. Oil change? Upload it. Tracking calories eaten to help lose weight? Uploaded. Basically a one stop shop. Needs to be offline as it would pertain to personal and sensitive data. I got the idea as I’ve been using Claude to help track weight loss and exercise using documents. I just tell it what I did this week and what I ate and it tracks it and I can see trends. But I don’t want to upload any personal security stuff like doctors visits for obvious reasons.

Is this the right place for this? Would I ultimately need a home network to build this? Ideally long term I want a home network machine with a laptop to remote into said machine, but that’s a separate project down the line I think.


r/HomeServer • • 5d ago

My barbaric AI homeserver lives 1,500 km away and I touch it once a year. This is my remote disaster recovery setup

Thumbnail
gallery
107 Upvotes

(The stains on the wall are last-minute coffee spill, not blood)

tldr: remote LLM inference server + Hermes agent + various projects/experiments through 4g hotspot network and a few disaster recovery scenarios.

It's in my parents' house and I live abroad, so it's "designed" to (hopefully) stay operational even if one or more things break. In case of emergencies, my parents understand basic rudimentary instructions like "open the black laptop and press the power button". There is no monitor/screen.

Hardware

- Supermicro H12SSL-NT, EPYC 7443, 512 GB DDR4, 2x Radeon AI PRO R9700: inference server and experiments

- ThinkPad T480 (batteries removed): runs a Hermes agent

- Raspberry Pi 4 + Raspberry Pi 3: jump boxes / watchdogs

- All connected to a 5-port gigabit switch

All machines are setup with tailscale, nothing is port-forwarded, and every box has its own firewall.

Power cuts

- The Pis come back on their own and rejoin Tailscale.

- The H12SSL powers back on but stops at the LUKS prompt (see below).

- The T480 "power on with AC" BIOS option doesn't work reliably even after BIOS update, so a Pi wakes it with Wake-on-LAN instead (which works reliably)

Internet

- There's no internet in the house yet: the fibre install got temporarily blocked by council permits. For now an old phone runs a hotspot, the Pi 4 joins it automatically (pre-saved name + password), joins tailscale outbound, and I switch it into router mode remotely so it shares that connection with the switch.

- When fibre gets installed, my parents were instructed to plug the rj45 into port 1 of the switch,

I switch the Pi 4 back to normal, and everything moves over.

- Emergency fallback: any phone hotspot with that name/password, and the Pi 4 is reachable again, and can share internet with the other machines.

- Emergency fallback 2: USB tethering in any of the 4 machines.

- In the future, I might buy a 4g router, so fiber + 4g as automatic fallback

The Pis

I set up Ubuntu Server with LUKS on the H12SSL, so after every reboot someone has to type the disk password before it can boot and self-connect to Tailscale. The Pis' only job is to stay alive and reach the board's IPMI/BMC,

so I can:

- power it on/off/reset remotely

- debug hardware issues remotely (fans, temps, sensors)

- type the LUKS password through the BMC's remote console

- reinstall the OS remotely: In an emergency, I ask my parents to plug a usb stick in any machine -> I then setup the Linux distro startup USB remotely -> I ask my parents to remove the usb and insert the usb stick into the PC, and I do the install remotely though IPMI/BMC

If one Pi dies (SD card death), the other one takes over. I am happy to have found a good job for the PI 3. If both die, the T480 can do the same job (but after a power cut, someone might need to physically press the power button).

If the T480 dies (hardware), hermes can move and co-live with the LLM inference server.

If the LLM inference server itself dies, it's gg I guess. Same as if it would die in a data-center.

I didn't really have to complicate my life with LUKS, but it seemed like a fun way to force myself to learn IPMI/BNC, since it's my first server motherboard, and first pc build.

Of course, happy to consider any feedback/tips you might have