r/HomeServer • • 19h ago

I'm a server

Post image
582 Upvotes

r/HomeServer • • 10h ago

Finally finished building my home lab

Thumbnail
gallery
68 Upvotes

My home lab setup

Right rack:

  • ZimaBlade running OPNsense (firewall/router)
  • 2x TP-Link TL-SG108E 8-port managed switches
  • 3x Hyper-V nodes: HP EliteDesk 800 G3 Minis
  • 3x Proxmox nodes (cluster): HP EliteDesk 800 G3 Minis
  • Noctua 40mm fan at the bottom

Left rack (NAS):

  • TrueNAS on an ASRock N100M (Micro-ATX) motherboard with 4 SSDs and 2 SATA drives
  • 2x Raspberry Pi 4 running my secondary NxFilter, secondary dnsdist, and Homepage
  • TP-Link 5-port unmanaged switch
  • Power strip (forgot the model, got it from Amazon)

Remote management: The EliteDesk 800 G3s support Intel vPro/AMT, so I run MeshCommander on one of the Pis. I get remote KVM, power control, and BIOS access even when the OS won't boot.

Hyper-V nodes:

  • Node 1 (64 GB): the main server. Runs BookStack, the domain controller, dnsdist (in HA with the one on the Pi), Dockhand, Immich, NxFilter, Plex, Shinobi, and some torrent stuff.
  • Node 2: 32 GB
  • Node 3: 16 GB

What's next:

  • Node 1 runs almost everything right now. I plan to spread more VMs to the other nodes, including Veeam for replication between nodes (I think I have enough storage) and a secondary domain controller.
  • TrueNAS has no redundancy yet. I'm not sure how I'll handle that, and I'm not buying anything at current prices.
  • The firewall has no backup yet. The plan is a second OPNsense as a VM on one of the nodes, paired with the ZimaBlade using CARP. Since I only have one public IP, the WAN would run through a VLAN on one of my existing switches, and the backup takes over only if the ZimaBlade goes down.

I've been doing this for a while. I just built what made sense to me. If you see something I'm doing wrong, or you have any suggestions, I'd appreciate it. Thanks!


r/HomeServer • • 13h ago

Gpu config for dell t7910 with dual 2697a v4 xeons, 108 ecc reg ram?

Thumbnail
gallery
3 Upvotes

I got a Dell t7910 with dual 2697a v4 xeons, 108 gb ecc reg ram (used all 16 dimm slots) and it has its og 1300 watt psu. I was thinking of doing some local models, maybe a cloud storage thing since it has 4 drive bays, home control/lab, just you know the basics. I'm stuck on what I want to do with the gpu setup. It has decent space for multiple gpus, and alot of pcie slots. Just curious on what everyone thinks! I'm pretty new to this so whatever u say won't hurt my feelings lol. Also peep the 2nd t7910, another project lol.


r/HomeServer • • 13h ago

Synology NAS vs NAS + (mini PC) vs PC build doing everything

1 Upvotes

Hey everyone, longtime lurker here.

Current setup: Synology DS1520+ (CPU: Intel Celeron J4125), RAM upgraded to 3 x 12TB in Synology Hybrid Raid 1 (so around 20TB usable storage, with 1 drive redundancy).
Hosting stuff like: Plex (with Plex Pass, hardware transcoding through Intel Quicksync), Homepage, Dockhand, Gluetun, Qbittorrent, Jdownloader, Komga, Kavita.

  • Been experimenting with Immich, but big imports choke my NAS's CPU.
  • Been wanting to install PaperlessNGX, maybe with the bells and whistles of being able to search through the documents through a search bar.
  • Been wanting to try and use handbrake to make my movies and series.
  • Been wanting to experiment with the arr stack, and automating my media library some more.
  • Been wanting to stop using my Synology NAS for 'computing', and keep it for what it's made for: storage. Or even stop using it as main storage, and just use it as backup.

I have some PC parts lying around from my previous gaming pc, which I haven't gotten around to selling yet: an Intel i9 9900k CPU, a Z390 motherboard (Asus ROG Maximus XI Code) and 32GB (4x8GB) DDR4 RAM, 1000W PSU.
So I feel like my options are:

  • Build a PC with those parts. I'd be using Unraid on it, for ease of use, even if I won't use the PC as a NAS (at first?).

    • Pros: I already have the parts. More power for stuff like Immich, PaperlessNGX, handbrake, light local AI models(?), future stuff like game servers or anything. I could add a GPU later if really needed. I can use the PC as computing unit, leaving my NAS to do the fileshosting. If I'd want to get away from Synology entirely, I can expand the PC into a fullblown NAS (maybe a Jonsbo NAS case?), it will already running Unraid anyway, and either sell the Synology NAS or keep it for backups.
    • Cons: Machine itself would have a bigger footprint (ATX Tower case). CPU, PSU (and RAM?) are probably overkill. Power draw might be an issue, although I have found a Reddit post of a guy massively underclocking it: https://www.reddit.com/r/buildapc/comments/wi7uhk/intel_9900k_underclockingpower_limit_experiments/.
  • Sell the PC parts and buy one of those mini PC's with Intel N100, or one of those refurbished office PC's with an i5 8500T, i7 8700T, i5 9500T, i7 9700T.

    • Pros: Small footprint. Probably enough power for the things I wanna do (for now?)
    • Cons: less expandability, cost of buying a new device (would be offset by selling my existing parts though).

Any advice? I don't want to have too much work keeping everything running, but I also feel like I could use some more horsepower. Is a PC + my Synology NAS, the best of both worlds, the best thing in my situation?


r/HomeServer • • 15h ago

How do you find out when something in your homelab is slowly going wrong?

1 Upvotes

Hi all, I'm a student developer researching how people notice slow problems in their setups, like a disk getting warmer, a service getting slower, or a battery or power reading creeping up, before something actually breaks. I'm not selling anything and have no product to link.

A few questions if you have a minute:

  1. How do you spot problems like this today (Grafana alerts, Uptime Kuma, scripts, just noticing)?
  2. What's the most annoying thing that went wrong that you only noticed too late?
  3. Have you tried building something for this yourself, or using AI to do it? How did it go?
  4. Would you ever pay for a tool that did it for you, and roughly what would feel fair?

Happy to read any answer, even one line. Thanks!


r/HomeServer • • 23h ago

I need help building a home server

1 Upvotes

Hi I built a custom AI that runs my home but at the moment everything is running on my personal PC but I don't want to leave my PC running 24/7 because I use it for games and other person things as well

So I want to build a dedicated server to run my AI and home assistant but I don't know where to start

How do I build a server is there specific components to build or do I just build another PC to host everything???


r/HomeServer • • 12h ago

Do I need a NAS HDD for a NAS?

0 Upvotes

I am planing to build a NAS, with 2-4tb of storage and backup drives but NAS drives are more expensive new and way more expensive used so I was wondering If it actually mattered if I used a NAS drive.


r/HomeServer • • 22h ago

Next upgrade recommendation

0 Upvotes

Hello I need some recommendation for my home server. I'm currently hosting Jellyfin, tailscale, photo/ file backup and a game server. I'm using Zimaos because I'm a beginner and I just want it to work (which it does).

I'm currently rocking these specs:

Cpu: r5 2600

Ram: 4gb x 4 sticks @ 2400mhz

Gpu: rtx 2060

Drives: 240gb SATA SSD + 12tb hdd (ironwolf)

**I know alot of people are going to suggest a another 12tb for redundancy, but I don,t have much on it and planning on adding a 2nd soon.**

I want to know, if the game server that I'm running is factorio (w/ space age dlc) should I upgrade the cpu or ram? From what I've seen, the cpu should be the answer but I'm unsure. My budget would be below 200$ CAD and I'm open to buying used. My 2 options are either a 16gb ram @ 3000mhz (that would replace my 2nd gaming rigs ram which are 32gb @ 3000mhz and the 32gb would go in my home server) for around 100$ used or a 3700x / 5600x for either 150-200$.

I've asked ChatGpt and it answered me mixed results.


r/HomeServer • • 20h ago

Setting up Jellyfin server : i5-4460 or Ryzen 5 2600?

0 Upvotes

Apologies for yet another question on specs, but I’m having a bit of a time figuring this one out.

The equipment I have on hand for this project :

• i5-4460 and motherboard

• Ryzen 5 2600 and motherboard

• 16GB DDR3 and DDR4

• GTX 1650, no additional power needed (PCIe powered)

• Like a bunch of HDDs

This server is for backups of files and Jellyfin streaming. I’m just stuck on whether or not to go DDR3 or 4, as whichever I don’t use I could either sell or send off to a friend.

In your experience, which build would be best?

Thanks everyone!