r/IndustrialMaintenance • • 20h ago

Funny Friday at 8pm, had nothing on the truck, resorted to house for this concoction.

Post image
87 Upvotes

15v 3.4a power supply to comms radio died in the night. Threw this beast onto the fire to keep the radio online for the week. It's a 13.8v 4amp unit, and was able to adjust a pot in it to make it give 15 volts.

Now that the system is online, how much we wanna bet it's gonna be there for two years before management gets a correct replacement power supply?


r/IndustrialMaintenance • • 5h ago

In-house HVAC PM

0 Upvotes

I'm a production manager that just inherited responsibility of our maintenance team (formerly led by Engineering). It's 13 guys (8 on 1st shift) with a diverse range of skills. Two have basic HVAC training through a local tech school. The previous manager outsourced all rooftop HVAC preventative maintenance. The contractor was on site for what seemed to be an excessive amount of time (multiple trucks over multiple weeks in spring and fall). I'm curious what the general consensus is on this. Are HVAC pm's typically something that is managed with in-house maintenance team?


r/IndustrialMaintenance • • 20h ago

Is working in Industrial Maintenance a great opportunity to gain the skills and knowledge to do handyman work on the side as a hustle or start and thrive with a handyman business?

11 Upvotes

Just want to know.


r/IndustrialMaintenance • • 1d ago

The pumps yearn for the mines

Thumbnail
gallery
154 Upvotes

Nash vacuum pump fully rebuilt and ready for service.


r/IndustrialMaintenance • • 1d ago

Electrical bias maintenance engineer looking for FMCG roles (UK, open to relocate)

4 Upvotes

Hii all,

I'm looking for a new maintenance engineer job and wanted to ask if anyone knows of openings at their site.

A bit about me:

- Electrical bias multi-skilled maintenance engineer

- BEng Electrical & Electronics, MSc Robotics

- PLC experience (Siemens), conveyors, automated warehouse kit, food manufacturing

- Experience at a big automated warehouse, a logistics company and a food factory

What I'm looking for:

- FMCG, food manufacturing or warehouse

- 4 on 4 off or Panama, days and nights both fine

- Around £48k+

- Happy to relocate anywhere in the UK

Mainly I just want a well-run site that takes safety seriously and looks after its engineers.

If your site is hiring or you know a good company, please comment or DM me. Thanks a lot!


r/IndustrialMaintenance • • 20h ago

Do people use test strips for cooling tower water?

0 Upvotes

Student major in Civil engineering. Just curious how people check cooling tower water on site. I know strips generally give a rougher reading than liquid reagent kits but it can test multiple parameters like Hardness and alkalinity. If you use them, what do you measure and how often?

If a device could take a sample and read the strip automatically and high frequency, would that help people catch changes between rounds? Or does the water chemistry change slowly enough that your current manual schedule works fine?

Any feedback helpful! Thank you!


r/IndustrialMaintenance • • 2d ago

Funny how there's always money after something catches fire.

Post image
510 Upvotes

We check our switchgear temps every year. Found over 20 breakers, disconnects, and other parts running way too hot.

Management's response? Save money. Do nothing.

Like they give a damn that some insulation materials can start breaking down above 80°C.

The four guys making the big bucks sit around deciding what to do, and nothing actually gets fixed.

Then we had a switchgear fire this year, and suddenly everything needs to be checked ASAP.

Oh, and they finally bought us a thermal camera last week. Only took a fire lol.


r/IndustrialMaintenance • • 2d ago

How did you find your first job

5 Upvotes

I'm in the Sacramento area, was interested in getting into the field, applied to several maintenance positions and haven't heard back.


r/IndustrialMaintenance • • 2d ago

EDC for I&E tech?

3 Upvotes

Newer to I&E work and was wanting to see everyone’s tips and tricks or what they carry on them everyday in their pockets or on their person


r/IndustrialMaintenance • • 1d ago

Michelin maintenance test

2 Upvotes

Has anyone recently done the single skill mechanical assessment for Michelin,just got the email back that my test will be Decemeber 1 and they sent me the study guide and i immediately started studying.Just curious if the test is mainly focused on certain areas or is it really evenly dispersed of all topics.Any advice at all would be greatly appreciated.


r/IndustrialMaintenance • • 3d ago

Called in to assist a short-staffed hospital with chiller tube cleaning. Spent the night stuffing tubes to help keep the cleaning process moving.

Post image
410 Upvotes

r/IndustrialMaintenance • • 2d ago

Looks fine. No comms.

Post image
1 Upvotes

r/IndustrialMaintenance • • 2d ago

I replace an I/o dc module on my alamacchine U500 it’s not saying this on the screen the replacements are identical , the module is seated on the bus correctly , all the pins are in good ,

Thumbnail gallery
1 Upvotes

r/IndustrialMaintenance • • 3d ago

Question Corrugated Plant 3d scan

210 Upvotes

3d scan I recently did. Spend a lot of time scanning in these environments. Anyone work at a plant that has a digital twin of it?


r/IndustrialMaintenance • • 3d ago

Funny Cold pizza

Post image
91 Upvotes

Walking into the shop office and behold this contraption from my coworker 😆


r/IndustrialMaintenance • • 3d ago Regret

First page of the first panel the new guys wire up

Post image
146 Upvotes

I didn’t get a chance to stop them. I blinked and this happened…


r/IndustrialMaintenance • • 3d ago

Rant- too many tools/toolboxes? This job has made me lose skills?

15 Upvotes

I’ve been doing industrial maintenance for seven years. Four of those were at a die cast plant, and three years at a robotic assembly welding plant. First place is where I acquired most of my tools and they saw regular use. Now I barely use more than an Allen pack, crescent wrench, Knipex pliers, 11-in-1 Klein screwdriver, welpers, and dowel puller, punch, and hammer for changing small cylinders out.

I’ve went through several toolboxes over the years trying to find the setup I liked most. The most recent one was a US General full bank service cart, 5 drawer cart, and a 40” Snap On heritage single bank box. I decided I hated the tiny drawers on the Snap On and traded it for an AR-15. I ended up taking tools home that were in that toolbox and now they’re in crates doing nothing.

Now for the truly ranting part. Since I’ve been here I get frequent comments about having too many tools, or a lot of tool boxes, and shit along the lines of no one needs that many, the implications always being that I’m weird.

But who do they call when they run into that odd scenario that they need something they don’t have?

This place also has toolboxes they bought for techs, so people kind of move into them when someone leaves or whatever. I find it all really strange since at the die cast plant we had to buy our own.

I’m about to buy a US General 56” cabinet and bring tools back because I have no garage and I’m sick of seeing them in crates doing nothing. But then I’m second guessing myself because I’ll just be dealing with more comments and other bullshit.

So do I just have too many tools? I’d hate to sell and then rebuy and lose money in the process.

Next rant- this job has made me lose skills, or so it seems. I haven’t used a meter more than maybe thirty times in three years. No real welding. No real shop to weld or work on things - work on things? Who am I kidding? It’s either sent out for repair or just thrown away. Getting out stripped bolts? That’s a tooling job, so not gaining any experience there. Nothing really hydraulic. I’ve made a handful of lines but that was to replace water lines that we don’t carry fittings for. Everything is robots, sequencing, and pneumatic cylinders. I think I’m losing my mind working here, but I’m also doubting that I can make it anywhere else now.

And as a final note that doesn’t matter but does matter, I’m a female.

To sum it all up, is this job just that out there, do I have too many tools, or really do I just need to leave and relearn skills I’ve lost somewhere else?

Thank you all for reading this ridiculously long rant.


r/IndustrialMaintenance • • 2d ago

Question SACA Certifications

1 Upvotes

Hello, I recently enrolled in my local community college for some electrical system classes. 2 non-credit courses, NC-170 and NC-172; upon completion of each course module, I receive a SACA certification, and at the end of both courses, I receive a Maintenance Electrical Systems Technician 1 - Certificate of Competency. Ultimately, my final career goal is to either become a certified state Electrician and/or get into the maintenance field; industrial is the goal. Would SACA certs and my Certificate of Competency really help me get a nice job offer, or is this somewhat a waste of time? I have heard a lot of people say that SACA is gimmicky and not all that useful. I started working as a fulfilment driver for an Industrial Supply & Solutions company right out of high school, so I have about 6 months of experience with them, but besides that, I have no other previous work experience and just graduated from high school this June. Any advice or guidance? I feel somewhat lost.


r/IndustrialMaintenance • • 3d ago

Can you tell what is making it need to be reset every 20 minutes or so?

Post image
54 Upvotes

r/IndustrialMaintenance • • 4d ago

When I’m out of the factory and night shift is like “oh we can rewire the new heaters without asking how”

Post image
206 Upvotes

Well this lines going to be down for a while as they have no replacement


r/IndustrialMaintenance • • 2d ago

Would you trust a junior tech’s AI built only from a retiring veteran’s reviewed knowledge?

0 Upvotes

Thought experiment for maintenance people: a veteran tech who’s about to retire records how they troubleshoot the machines they know best, and reviews what gets written down. A junior tech then uses an AI built only from that reviewed knowledge when they hit a fault they’ve never seen.

  1. Would you trust it?
  2. What would it need to have (or never do) for you to trust it?
  3. If you were the veteran, would you share what you know for this, and what would you want in return?

r/IndustrialMaintenance • • 3d ago

Question Self Employed

11 Upvotes

Anyone ever go out on their own? I’ve got 15years heavy manufacturing experience. Last 5 being supervisor. I got 6 months salary saved, tools, and a truck.

All I do is hear about companies needing maintenance guys and then just contract it all out at $100+/hr.


r/IndustrialMaintenance • • 3d ago

Question Uniforms

0 Upvotes

Do you guys get uniforms from your place of work?
It’s a bit weird, and I probably shouldn’t complain, but we get a fresh set of clean uniforms every day. Blue pants with side pockets and a blue button-up shirt with two chest pockets.
Now, I know I shouldn’t complain, but I hate wearing the button-up shirt. I genuinely think it’s not a good look on me, and it’s bothering me. 😆 I also generally hate button-up shirts and never wear them outside of work. I just feel weird wearing them.
Just venting, LOL. Would love to read some comments to help pass the time. 😎


r/IndustrialMaintenance • • 3d ago

How are Tempsens thermocouples evaluated for high-temperature industrial applications?

0 Upvotes

Thermocouple selection for high-temperature industrial processes depends on factors such as operating range, thermocouple type, sheath material and exposure to harsh process conditions.

Tempsens manufactures industrial thermocouples for applications involving furnaces, heat treatment and metal processing. For engineers evaluating temperature sensors for these environments, which technical specifications and performance factors matter most when choosing a thermocouple?