r/Integra • u/Covid-vaccine_420 • 2h ago
What lip and side skirts are these?
r/Integra • u/twincamKA • 8h ago
Back in early 2022 when I was 16, I had a neighbor that lived about 2 blocks from me. Never met the guy but I'd always notice his car when it went by, a dented up, straight piped Frost White '94 Integra Coupe rocking the '98 front end and tailights with rusted up fenders. I ended up comepletley obsessing over the car, not entirely sure why but I know I've never felt whole in a way, just some self esteem issues yada yada... something about it's character really caught my curious little mind, i'm guessing how it presented itself to the world, screaming B18B1 reverberating through the atmosphere, how it could be so imperfect but unapologetically itself, something I could never be at the time.
For about a year before that, I would always hear that raspy little B pass by my house and never really paid any mind to it.... i guess if you see a reocurring thing enough times you will be forced to notice it.
She been sat since July of 2022 as a rod knock has claimed it's life. I've tried to buy it a couple of time but to no avail.
Just picked this up, a BMW guy now trying out the VTEC life. Don’t know much about these cars. For context: 1 owner, 275k miles, B18 VTEC and 5 speed. tan interior, green exterior sedan. Not in great shape but runs and drives. Have the original window sticker and maintenance manual.
Immediately replaced the 12 year old 17” wheel tires with new tires on stock wheels, did the thermostat, spark plugs, oil change, clutch fluid change, power steering fluid flush. Also did valve cover gasket, VTEC solenoid gasket, and oil pan gasket. Want to tackle timing belt, water pump, belts and all pulleys next before hitting the suspension and other bushings.
Anyone have any recommendations for fun upgrades that are OEM-ish? Think this could be a cool daily.
Just curious, what’s the market on these cars like? My friends say I got a good deal at $2200 with the stock rims on top. It’s got a lot of miles, hail damage and bad clear coat. Interior is a 7/10 outside of the passenger seat. Everything works, no lights on the dash. Original motor and transmission, bone stock with an intake (that I put on since the original was shredded)
r/Integra • u/PatrickGSR94 • 15h ago
Got tired of the old stockers warping and making scraping noises every time I visit Tail of the Dragon. So hopefully these will work better. ITR-spec calipers, 08 TSX pads and 08 Mini Cooper 11” rotors, all from PowerStop. Plus lug spacer rings since the Cooper lug holes are larger. Under $300 total.
r/Integra • u/2zZach • 16h ago
I have some oil leaking from the transmission area. 1995 manual integra RS fully stock. Do you all think that this leak is from the transmission itself or the oil pan? I have not jacked it up and gotten under there quite yet - just wondering what the most likely culprit is before I do. Thanks in advance.
r/Integra • u/Patient-Section5220 • 19h ago
r/Integra • u/ToastyMcloasty • 23h ago
I guess this is an update but I believe I finally figured out why the car won’t start at times. The pin that connects to the starter solenoid is extremely loose to where I can move it with a slight touch of my finger. I believe the vibration of the engine pulls the pin out as when I turn the engine off I can push the pin deeper. Is there a way to make this connection more secure?
r/Integra • u/Ok-Space-5466 • 1d ago
r/Integra • u/Over-Category-9924 • 1d ago
This might be a dumb question but how do I go about lowering my car thats on the Ground Control/Koni Yellow coilover conversion setup. It's going to be my first time messing with any type of suspension parts. From the research that I have done, seems like the way to adjust the ride height of these is to unlock the perch ring with an allen and use a spanner wrench to lower it(seems like you can also hand loosen/tighten once you unlock the ring???). This was all done before the shocks were installed onto the car. How would the process differ for my situation where shocks are already installed onto the car?
If anyone has any tips/forums that they could direct me to, that would be appreciated. The previous owner said that he dropped the height by a "tiny" bit but relatively stockish height. I want to lower the car to close the gap between the fender and tire so around a 0.5-1" drop.
r/Integra • u/Intelligent-Layer755 • 1d ago
my 1994 integra LS makes this toad-like sound on startup and periodically while driving, i have no other issues with the car but i wonder what would fix it? odd sound never heard before lol
r/Integra • u/Ok_Salamander_8505 • 1d ago
I made this to give me the opportunity to get more of you involved in what I am doing and to get advise so you can all follow along. Please share this as it is a look into the completion of my AWD RH Track Focused DC2 Type R.
r/Integra • u/Mysterious-Draw5658 • 2d ago
I wish il own a real dc3 one day..
r/Integra • u/Ok_Salamander_8505 • 2d ago
The original wiring plan called for two commercial 35-channel PDMs, one for the engine bay and one for the body. The more I worked through the harness, the less I liked it: two boxes, two sets of power, ground and CAN, and more wire than the car needs. So we designed our own. We call it PDM86, a Blacksite Motorsports inspired digital 86-channel PDM built for full vehicle integration on this car.
A PDM (power distribution module) replaces the fuse box and relays with solid-state switching. Every circuit is switched, monitored and protected electronically. No fuses to blow, no relays to fail, and every output reports what it is doing. PDM86 combines the I/O of both of the original units into one flat, sealed, black anodized aluminum case with no fans. The 86 is the I/O count.
It runs the whole body side of the car. It is the body control module as well as the power distribution, so lighting, turn signals, hazards, power windows and mirrors all go through it over CAN. For example, the brake lights are driven by the PDM from the brake inputs, not by a switch wired straight to the bulbs. It drives the three fuel pumps. The FT600 sends a PWM signal to the PDM, and the PDM drives the pumps. They sit in a Radium sump in the trunk and feed forward through bulkhead passthroughs.
It talks to the FT600, the CAN steering wheel and the electric power steering. It reads chassis sensors: ride height at each corner, plus brake rotor and caliper temperatures. It powers the water-methanol system in the rear. It goes into a very low power state with the key off, so the car can sit without draining the battery. It has Bluetooth for live status and the fault log. It is read-only by design. Nothing on the car can be switched from a phone, and settings can only be changed with the car parked.
ABS stays its own independent system. The PDM does not get a vote on braking, and steering assist keeps its own authority too.
Every output defaults to off. The firmware has to decide to turn something on. The engine harness and the body harness are separate. The FT600 lives in the driver's side of the dash with the engine harness running out from there. PDM86 mounts behind the passenger seat, and the body harness distributes from that point along the tunnel and sills, clear of the roll cage. We 3D scanned the body shell and are using the scan to lay out the harness and get wire lengths right before anything is cut.
The board layout is being finished for the first prototype run, and the case design is done alongside it. It still has to go through bench and thermal testing before it goes in the car, so this is a design update, not a finished part. I'll post more as the prototype comes together.
Happy to talk through the design thinking. Has anyone else here run a PDM in a DC2, and what would you do differently?
r/Integra • u/Ok_Salamander_8505 • 2d ago
Most of the work lately has been on a screen, not in the garage. The plan has not changed: street-driven, all-wheel-drive DC2, built to go after 7s. What changed is how I am getting there. I 3D scanned the whole shell and I am placing every part against the real car in CAD before any metal gets cut.
Where it stands right now:
Chassis. Chromoly cage is on its seventh concept revision. It ties into the rear subframe so the drive loads go into the cage and not the floor. Rear end. CR-V based AWD rear subframe with the Real Time AWD diff. Spent a lot of today just getting the lower control arms and trailing arms sitting right and the wheels level. Fuel cell is in the model too and it still fights the floor by about half an inch, so that is not done.
Electrical. This is the part I am most excited about. No fuse box, no relay box. I designed my own 86 channel power module that also handles the body functions, sealed case, sits behind the passenger seat. The whole chassis harness is routed through the scanned shell Steering. Triple Seven CAN wheel on a Zestek hub and a MOZ CRAFT electric power steering kit, both wired into the power module. Four wires to the wheel and every button is on CAN.
Engine management. FuelTech FT600, with the wastegate, EGT and wideband all on the same network. Data. Front knuckles are getting strain gauges and bearing temp sensors, plus ride height and brake temp sensors at the corners. I want the car telling me what the suspension is doing. Brakes and wheels. Wilwood six piston fronts, DynoPro rears, CCW Classics on 17s.
What is NOT done, so nobody thinks this is further along than it is: the steering parts are placeholder shapes because neither company publishes CAD, the brake models are placeholders too, the fuel cell needs to move, and the cage still has to be checked against the rulebook before I bend a tube.
Two questions for the group:
r/Integra • u/ToastyMcloasty • 2d ago
Been having issues with the integra as it won’t start. Today I noticed this connection was wet with what I assume to be coolant that I accidentally spilled the other day. I cleaned it and I’m able to have the lights turn on consistently now, though the car still won’t start.
r/Integra • u/Ok_Advertising_8831 • 3d ago
I been wanting to get an aftermarket hood for awhile now and I always thought a vented one looks the best but I don’t really want a carbon fiber hood, so is there any brand who make non carbon fiber vented hoods
r/Integra • u/Sh4dowStrik3 • 3d ago
i have a (mostly complete) CARB compliant greddy turbo kit for the B18B
I have:
greddy log turbo manifold
greddy td05h-18G turbo
intercooler piping (one with carb sticker)
hks (sqv i think) blow off valve
greddy blow off valve
turbo elbow
front mount intercooler
manual boost controller
it would still need tuning, downpipe made, and injectors/fuel system
I live in CA but wanted to know what i could realistically sell the kit for as i know they are discontinued
r/Integra • u/tiredofmyself101 • 3d ago
Bought my 2024 Integra A-Spec used back in August. About 6 weeks later I got a bunch of warning lights and it went into limp mode. It happened 3 times in like 3 weeks, and every time it would clear up after the car sat for a bit. My mechanic couldn't figure it out, so I took it to the Acura dealer.
They found a broken wire right at the connector for the turbo bypass/blow off valve solenoid. They say it's not covered under powertrain warranty even though I'm at 62k, and they won't just fix the connector because it's "against Acura policy." So the only option they're giving me is a whole new engine harness for $1,682 plus fees.
I opened a goodwill case with Acura and I'm waiting to hear back. I've seen this is a pretty common problem on the older Civic 1.5Ts (P0035 code), so it feels like a known weak spot to me.
Anyone else have this happen on an Integra or Civic Si? Did Acura or Honda end up covering it? And if you went with a pigtail repair instead, did it hold up?
r/Integra • u/candlehead69 • 4d ago
Short story long... I've owned this car for 6 years. I used to drive it 80 miles everyday for work. 4 years ago we bought a house in town and now I live .7 miles from my job. I ride my bike most days. We've got a driveway full of cars so I never really "need" this car on a day to day basis. In the winter I usually take one of the 4x4s. About 1 year ago I realized that the small tab that depressed the brake switch had broken and was leaving my brake lights on till the battery died. Discovered this while trying to replace the brake switch.. thankfully did not have to replace the brake switch. Replaced the tab on a Saturday, jumped the car, and recharged the battery. Drove it for about 25 minutes the following Sunday. Monday morning I started it up and drove the short distance to work and as I was pulling into the lot the car just dies. I try to restart it while I coast in and it just cranks and cranks.. I figured it was possible I was out of gas. Added a gallon but still just cranked. Eventually pulled a spark plug and discovered I had no spark. I went through all the tests on the distributor with a multimeter. It passed with flying colors.. now I'm led to believe I might have a bad ground if I still have no spark but distributor checks out. The snow came shortly after this happend and we needed to drag my car out of the way so we could plow the lot. It's now sat for almost a year. I dragged it down to the shop yesterday to get this thing running again. Can anyone, off the top of their head, tell me where in the engine bay I should be checking these grounds. I'm obviously aware of the one up top on the valve cover. I cleaned that one first. Pic is from 4 years ago when I brought our first real Christmas tree home and is for attention. This is such a good little car and I'm tired of neglecting it.
r/Integra • u/JDMHYPE2 • 4d ago
How it started:
Last week it suddenly started sounding deep/loud, was slow to rev, wouldn't go past ~4k (by ear), and had no power when driving. Found oil on the old spark plugs.
Work done since:
New plugs, new distributor cap, new valve cover gasket
Current Problems:
- Idles normally, but when revving it revs slowly and hits a hard wall around 3-4k rpm it sounds like
-When revving, air pushes back out the throttle body/intake manifold
- Deep/loud exhaust (Not how it usually sounds)
- RPM dips a little below idle when i stop revving, then settles
What I've Checked:
- No engine code
- Pulled each plug wire at a time on idle, every cylinder misfires so all 4 are firing well
- Cranked to TDC, both cam gears show UP at the top, so no big belt jump. Can't confirm if it skipped a tooth or not since i can't see index marks.
Does anyone know what this could be? Any help would be really nice, thank you.