r/Keychron • u/dim-mak-ufo • 1h ago
My M6 led keeps lit green even when turned off
I tried resetting, updating the firmware, turning off/on multiple times.
r/Keychron • u/dim-mak-ufo • 1h ago
I tried resetting, updating the firmware, turning off/on multiple times.
r/Keychron • u/QueenZalaska • 3h ago
The keyboard is definitely dead and there’s nothing I can do, right? Should I throw it away or is there anyway to save it at all ?
It was turned off when the spillage happened and it was resting against my monitor screen the entire night afterwards. None of the lights turn on and nothing happens when I press the keys.
r/Keychron • u/LittleHsien • 4h ago
For context. I want a full size or at least 99% HE keyboard that isn't too expensive like wooting two HE. I also want a good and frequently updated software, which i feel like keychron does have. 8k or not doesn't matter. I've tried Aula hero99 HE, the board and switch seem good enough but the software feel kinda buggy.
Every shop in my country only sell K10 HE special edition with gateron switch, but i want the standard version with keychron lime switch because it seem similar to graywood switch on the aula's one. The only option for me is to buy it from Keychron directly. But i heard that isn't a good idea.
Or i could wait for V6 hybrid ultra and hope that someone in my country will sell it.
Or just get something else.
r/Keychron • u/Fluffy_Boysenberry17 • 13h ago
I found one for 60$. Does anyone here use it?
r/Keychron • u/Jumper44_ • 13h ago
Hi, I got the "Keychron Q16 HE 8K ISO" (in blue) 2 days ago.
This is a short review or (mostly) user experience that'll conclude in a question regarding software functionality (launcher.keychron.com, henceforth mentioned as launcher).
TL;DR: Primary issue I had is the Launcher makes it appear that LT(3,KC_CAPS) is supported, but it doesn't work on the Q16 HE because its firmware doesn't support this QMK functionality as far as I know, which I wasn't initially aware is QMK only (i.e. misleading on launcher) and documentation doesn't exist for that. Or my kb is indeed broken, which case I need feedback since documentation is not specific.
As for my kb needs: reason why I bought the keyboard was that I started playing osu! (a rhythm game) where I noticed that rarely I would get double taps, which I attribute to being if I don't fully release the key before pressing again I can be unfortunate at being near the actuation point in a way that makes it double tap unexpectedly. So I now had a reason to want HE switches and Rapid Trigger. And old mechanical kb is more than 8 years old.
I knew Wooting, but too expensive for what I wanted, and found Keychron an alternative recommendation which also should have good software/firmware.
I found the Q16 kb on a local reseller site that's 52% discounted, so 999 DKK or 134€.
There was also "Keychron K6 HE Wireless Tri-Mode" at 42% discount so 749 DKK, which I would've picked if I didn't find the Ceramic selling point of the Q16 more attractive/interesting. Both 65% layout, would've prefered 75% but on second thought I can manage with layer fn.
I only researched the V, K or Q representation and watched/read reviews of the Q16 basically and it seemed to be fine. Tried the launcher keyboard demo, which I now know is partially misleading unless you have QMK.
I knew the Q16 is proprietary firmware and not QMK, but not much else of QMK except it means open software and you can flash your own firmware giving you lots of functionality options. I now know that the proprietary firmware is very limited in contrast to QMK.
After using the kb: I like the Ceramic keys, the typing/sound and the HE with Rapid Trigger does solve my problem in osu!. I don't care about SOCD since it's banned anyway (CS2 and osu!).
I'm pleased with those features but will note I don't know any better, as in I'm ignorant and not knowing more niches regarding kb or experienced other high quality kb.
Now regarding the fact the keyboard is 65% and not 75%, i.e. missing f-row, then the default fn key beside the right alt key is too reachy for function keys, so need to bind fn layer for left hand.
CapsLock seems a common candidate. In the launcher applying MO(3), so while CapsLock is held it's layer 3. Problem solved, I luckily don't use CapsLock anyway so "good enough".
But I was scrolling through the launcher for other functionalities and was mislead to what I'd like to be able to do is LT(3,KC_CAPS), which is while held it is layer 3, but if tapped it's normal CapsLock functionality.
I expected it to work because the launcher shows as shortcut I can apply it as a key remapping in the sections. But that doesn't work, the key just does nothing when held or tapped. The launcher UI recognizes it as a valid functionality and says exactly what it's meant to do, but doesn't say it won't work on the keyboard. So I who didn't know about QMK is lead to think the keyboard is faulty, but the launcher just uses QMK lingo that it doesn't support on Q16.
Under (Keymap -> Layer) it shows shortcut to apply some layer switching.
https://www.keychron.com/blogs/archived/switching-and-toggling-layers-efficient-keyboard-customization
But only MO(#), TG(#), TO(#) is working ( # as layer number 2 or 3 ). And not LT(#,KC_SPC), TT(#), OSL(#).
I.e. it's very misleading that it shows you can apply those functionality to keys, but then it working with firmware.
There's also a (Keymap -> Hold / Tap) section, but none of those works either. This one isn't even in the demo launcher so even more confusing as in expecting it's a valid feature. (i.e. keycodes SC_LSPO, SC_RSPC, SC_SFTENT etc.)
They explicitly enabled that section and disabled others. It feels more like they have a template for their HE keyboards they just enabled without second thought.
Also the launcher has an ai agent/chatbot that's supposed to help, but it just gave a recursion limited to 25 error. Used ChatGPT to find out the reason it's because Q16 doesn't have QMK. Then tried to research whether I should've known this upfront, but I just couldn't find anything note worthy, except what QMK is, but not what it means for a keychron kb that doesn't support QMK in functionality except proprietary firmware and you have the launcher site, but NOT that some features on the launcher isn't always working and that you can map the keys but some might just not work.
Everywhere (reviewers) just says it (Q16) has good software functionality.
So I'm now writing this so others may be informed that the launcher is misleading for some of the functionality.
It's my experience, but I might be wrong in some aspects, so is there a similar functionality that works without QMK? Or confirm my claims. And I mean on the launcher and not a separate hotkey script application.
Overall, I'm happy with the keyboard. The ceramic keys, typing experience and HE switches with Rapid Trigger are all great. The software is good enough for my current needs, but I don't know if my kb is broken or otherwise find it misleading that the Launcher exposes functionality that doesn't appear to be supported by the keyboard's firmware, which ruined my day a bit so now I'm here. I know if I didn't see it in the launcher or there was warnings/errors I wouldn't have thought much of it and been more accepting that it's QMK boards only, but it's ambiguous.
I'm currently using MO(3) on CapsLock as a workaround. It works, but having LT(3,KC_CAPS) would have been more convenient.
What also would've been nice is if I could have 3 different layers, i.e. the default layer, a unique layer for CapsLock and another unique layer on fn button beside right alt. I did initially think I had the 4 unique layers as quick switch by key, but it's only 2 at once (Mac / Win physical switch behind keyboard). But that is documented, I just didn't notice.
(I'm waiting for Keychron support email.)
r/Keychron • u/Strange-Wave-9067 • 14h ago
Hey everyone, I just received my new Keychron V3 Max. I connected her via USB (and tried also via 2.4ghz). It looks like the whole key row with Q W E R etc. is not working. No input in the computer. The rest of the keys work perfectly. The firmware is up to date, and also no input recognized on the Keychron Launcher.
Anyone has encountered the same? Thanks...... :'(
r/Keychron • u/nguyenis • 1d ago
So just noticed that the right mouse button is slightly indented/pressed down. It works fine, but it’s triggering me because I can feel the difference when I use it. I don’t want to pull it apart yet, so I’m wondering if there are any good non-invasive fixes to try.
The issue also seems to stem from the bottom left corner of the right mouse button. So far I’ve tried sticking a plastic card into the side and raising it to no avail.
r/Keychron • u/MrPresidentBanana • 1d ago
I've found it surprisingly hard to find a variety of reviews that were actually for the Standard wired V series, not the Ultra or Max, so I was wondering if anyone had tried them and can tell me what they think.
r/Keychron • u/Here2Play_Studio • 1d ago
Been using the Keychron B1 at home for programming for about six months. Honestly, I tried to like it but it just wasn't for me.
The first thing is the lack of backlighting. I knew it didn't have it and thought that wouldn't bother me. Turns out it really does. The keyboard also feels too light and flimsy to me, the keys wobble more than I'd like and it rattles while typing. It just doesn't feel solid.
I already use an MX Keys Mini at the office, so I finally got another one for home. What a relief. The keypresses feel firmer and more consistent, the keys feel stable, and touch typing is much easier for me. The backlighting is a godsend too.
The B1 is okay for the money, but after six months I wouldn't pick it again for programming. If you can afford the extra for an MX Keys Mini, that's what I'd go with.
r/Keychron • u/FuzzyAttitude_ • 1d ago
I’ve been using an original Keychron Q1 that I bought right at release. Like most early Q1 owners, I had to put some work into it to get it where I wanted, force-break mod to kill the metallic case ping, extra foam, tape mod, tuning the stabilizers, etc.
After modding, it’s been a solid daily driver for years.
I’m now looking at picking up the Keychron Q3 Ultra because I miss having a proper TKL layout and want the 2.4 GHz wireless / 8K polling upgrade. Before I pull the trigger, I’d love to hear from people who have made a similar jump or own the Q3 Ultra:
* What should I expect compared to a modded OG Q1? How does the typing feel and sound compare with the polycarbonate plate, factory acoustic foams, and KSA keycaps?
* Does it feel like a genuine upgrade, or more of a sidegrade with wireless slapped on?
* Do I still need to mod it out of the box? Specifically, did Keychron finally solve the case ping and stabilizer rattle on the Q3 Ultra, or will I still be opening it up on day one for a force-break mod and lube?
Thanks!
r/Keychron • u/ChoppedNoCap • 1d ago
r/Keychron • u/ToeComplete1221 • 1d ago
YunExpress sucks and the last mile carrier they chose to use is GOFO. Both these options fucking suck.
Nothing else to add I just wanted to vent. I would have paid for shipping if it meant not dealing with this
r/Keychron • u/Saucedmangooo • 1d ago
Hello,
so i recently picked up a keychron K2 HE. keyboard is phenomenal but for the life of me I cannot get it to update firmware.
I have factory reset it and tried many times but its not registering on the paired devices when I go to hit match device.
I included some photos in the launcher so maybe itll help.
r/Keychron • u/alfredo__pacino • 1d ago
Hello, I would like to put custom multilingual win-mac caps on my Keychron K5. Any idea of an online service that could do it? Basically I'd like to have sometime like some Logitech keyboards like this, for instance:
https://www.amazon.co.uk/Logitech-Signature-Full-Size-Deep-Cushioned-Compatible/dp/B07W4DH6FY/
r/Keychron • u/cromatoast • 1d ago
Internet search has been unhelpful - My bottom row (CTRL, Win, ALT, FN, left down right arrows, 0, & . on numpad) all are not responding. Oddly enough Spacebar works fine.
I have tried flashing firmware and factory resetting.
Has anyone else experienced this issue?
(I do not have any magnetic devices nearby)
r/Keychron • u/Majestic_Ganache_851 • 2d ago
Hi, I got my J2 QMK yesterday, and there's something wrong with the battery light. I charged my keyboard all night, but the battery is still low. I mean, the battery light is red, so any suggestions on what I can do, or is it just a keyboard problem?
r/Keychron • u/FrankieShaw-9831 • 2d ago
Please excuse my ignorance (and yes I did do a search and ran into conflicting informationm), but as I understand so far QMK is the base-layer and VAI or VAIL are the frontends?
I've also found different pieces of information in terms of what differentiates the two, so if I could be provided a link to definitive information, I'd really appreciate that
r/Keychron • u/Fair_Jeweler2858 • 2d ago
K9 Max I bought this sh*tty keyboard for the 2nd time and received my order, connected the keyboard wired thru web configuration
THERE IS NO BATTERY LEVEL INDICATOR FOR YOUR KEYBOARD ?!
not even the instruction manual there was a way to determine the battery
r/Keychron • u/TC_exe • 2d ago
Heyo! I recently got a Q11 Ultra 8K and was enjoying it until I noticed some crazy delay on some key presses. Notably, when doing a spam-y taptaptap's on backspace, half the presses wouldn't register at all.
I found guidance that you can adjust the bounce timings via the Keychron launcher, but there's a small detail I didn't find easily without some fiddling about...
You need to do it for BOTH sides!
Changing the bounce settings wirelessly, or with the left side plugged in, only affects the left side. You need to plug in the right side separately and adjust the bounce timing there too.
Also, under Settings > Other > Key Delay, you can enable 'Adjust Minimum Value' to go below the default 10ms minimum. So far I've had no issues with setting Press Down seconds to 0ms, and Reset seconds to 1ms, buy YMMV.
I was seriously considering returning this and getting the wired instead, but now I'm chillin' c:
r/Keychron • u/Lanky_Expression8932 • 2d ago
Hi all, has anyone put a grip tape or new skates on their new G6 HE yet? I’m trying to get one for my white G6 HE but need some recommendations.
Here’s some that Im looking at rn
r/Keychron • u/Ok-Technician578 • 2d ago
Just bought my first Keychron, K8 Ultra, and so far everything works except when I switch inputs on my KVM. The KVM is built in to my Dell 4025QW monitor.
When I switch inputs, I have to press a key to "wake" the keyboard. The behavior is the same on 2.4 Ghz wireless and wired. I don't have this issue with my old keyboard, a Logitech G915 TKL Lightspeed.
Is this a common issue with all Keychron keyboards, or is it specific to just the ones running ZMK?
Note I'm thinking about returning the K8 because I didn't know it had south facing lights and replacing it with either an HE model, or something with north facing lights. I know it drains power, but I've gotten used to the lights and color pattern I had set up on my Logitech keyboard. I can adjust the backlight timeout on the Keychron keyboards more than I can on the Logitech, so that might help extend battery.
Any input/suggestions would be appreciated.
r/Keychron • u/Tasty_Version8344 • 2d ago
Hey everyone,
I’m looking at buying the Keychron K2 HE (Black with wood accents) on Amazon.ca and noticed two different listings from official-looking sellers (Keychron 2020 vs. Keychron Store CA).
From digging into the specs and listing images, it looks like both are the exact same keyboard, with only two minor differences on paper:
Nebula Switch Variants:
https://a.co) only shows the V1 Nebula switches (purple stem, 40g start force, 0.2–3.8mm actuation).https://a.co — titled "K2 HE Pro" for SEO) includes an infographic showing both V1 and V2 Nebula switches (white/grey stem, mint bottom, 30±10g start force, 0.2–3.5mm actuation) with a note saying one variant is selected at random.Can anyone who bought the K2 HE from Amazon confirm if these are the only differences, and whether the V1/V2 switch lottery actually applies to both listings? Also, both are definitely hot-swappable with Gateron Double-Rail Magnetic switches, right?
Thanks in advance!
r/Keychron • u/kenji_hayakawa • 2d ago
When connected via Bluetooth, my Keychron K3 Max seems to interfere with my other Bluetooth devices (headphones, speakers and mouse, etc). It's particularly bad with audio devices, making the sound choppy to the point of inaudible.
Is anyone else experiencing similar issues? Are there any solutions/workarounds?
(My setup: Keychron K3 Max (ISO), MacBook Pro 2021 M1, Sonoma 14.8.9., BT Firmware Ver. 21.7.599.2581)
r/Keychron • u/IceCapStudios • 2d ago
It doesn't show up at all on Keychron UK or USA/Global. All I can find is the White special edition on Amazon. Does anyone know what happened to it or where else I could find it?
r/Keychron • u/Fair_Jeweler2858 • 3d ago
I just bought the Keychron K9 MAX after SUCCESSFULLY updating the firmware IT WAS SO HARD TO UPDATE YOUR FREAKING FIRMWARE , my entire 2nd row keys despite flashing a NEW FIRMWARE my entire 2nd row keys IS NOT WORKING
2.4GHZ the ONLINE SOFTWARE/LAUNCHER CANT DETECT THE KEYBOARD
EVEN RESETING THIS SH*T THE KEYBOARD 2ND ROW KEYS IS DEAD
DO NOT BUY THIS BRAND IS BETTER OF THE TRASHCAN
THIS KEYBOARD DIDNT EVEN LAST AN ENTIRE 24HOURS OF USE.
F.U KEYCHRON