r/Kombucha • u/wanderHavenwell • 4h ago
r/Kombucha • u/mehmagix • Sep 18 '21
what's wrong!? Is it mold? Is it normal? What's growing in your kombucha? Start here!
Welcome to r/Kombucha! If you're wondering what's growing on your kombucha and if it's normal, you've come to the right place.
Please review this information before posting a picture of your batch to the subreddit.
TL;DR:
- Dry + fuzzy on the surface of the liquid/pellicle/SCOBY is most likely mold: mold pics https://imgur.com/a/SzhysHi
- Geometric growths or wrinkly patterns on the surface of the liquid/pellicle/SCOBY could be kahm yeast: kahm pics https://imgur.com/a/XlnO7Ox
- Anything else and anything under the liquid level is most likely normal: normal pics https://imgur.com/a/HJaENDv
- If you're not sure, wait a few more days: mold or kahm will get more obvious as they grow, normal will stay about the same or form into new pellicle/SCOBY
- If the kombucha is already bottled for carbonation (commonly called second ferment or 2F), mold/kahm is very unlikely due to the high acidity and lack of oxygen access.
- Always use at least 2 cups of starter per gallon (125ml/L) when making kombucha to acidify the batch: high acidity (pH < 4.6) protects the kombucha from mold and kahm.
- Read our getting started guide for brewing tips: https://www.reddit.com/r/kombucha/wiki/how_to_start
Terminology: in this guide, "pellicle/SCOBY" refers to the rubbery blob that forms at the surface of a batch of kombucha. SCOBY stands for "symbiotic culture of bacteria and yeast", and those bacteria + yeast are found both in the liquid kombucha and in the solid rubbery blob. The rubbery blob's more accurate scientific name is "pellicle": it's a biofilm/mat of bacterial cellulose secreted by and connected to the bacteria forming it (some yeast also live in the pellicle). Culturally, however, the term "SCOBY" widely refers to the pellicle so this guide uses both terms.
Read more about pellicles here:
- https://fermentaholics.com/whats-that-white-waxy-layer-growing-on-my-kombucha-brew/
- https://onlinelibrary.wiley.com/doi/full/10.1111/1541-4337.12073 (scroll to "Tea fungus (fungal biomass) and its applications" section)
- https://www.sciencedirect.com/science/article/abs/pii/S0740002013001846
Diagnostic Quiz
1 ) Is the growth/odd thing on the top surface (exposed to air) of the liquid kombucha or existing pellicle/SCOBY?
- Yes - go to 2
- No - go to 8
2 ) Is the kombucha already bottled for carbonation (commonly called second ferment or 2F)?
- Yes - likely pellicle/SCOBY growth (it can happen in 2F!) or a yeast cluster. Mold/kahm are extremely rare in 2F due to the high acidity (pH <4.2) and lack of oxygen access (required for mold to grow). Booch on!
- No - go to 3
3 ) Is the growth dry and fuzzy looking with white or green color, and/or with black spores growing out of it?
- Yes - likely mold. Go to Mold section for pictures.
- No - go to 4
4 ) Is the growth a wrinkly or geometric pattern, very rough patterned surface, or very large air-y bubbles that cover large areas of the surface?
- Yes - likely kahm yeast. Go to Kahm section for pictures.
- No - go to 5
5 ) Is the growth one of: white/translucent + wet, disconnected oily/patchy sections, or a thin film with bubbles trapped underneath?
- Yes - likely normal pellicle/SCOBY growth. Go to Normal section for pictures.
- No - go to 6
6 ) Is the growth flat, leathery, and brown?
- Yes - likely a dried out pellicle/SCOBY area. Go to Normal section for pictures.
- No - go to 7
7 ) Is the the growth brown/black, wet, and partially/completely surrounded by pellicle/SCOBY?
- Yes - likely a yeast cluster. Go to Normal section for pictures.
- No - probably normal, but review all Normal, Kahm, and Mold pictures to be safe.
8 ) Is the growth/odd thing completely submerged in liquid?
- Yes - likely yeast. Yeast can form dark brown clumps in the liquid or on the pellicle/SCOBY, or alien-like formations suspended in the liquid. Mold and kahm cannot grow beneath the surface of the liquid without also showing on the surface exposed to air. Go to Normal section for pictures.
- No - go to 2
Normal
Gallery of normal kombucha: https://imgur.com/a/HJaENDv
Pellicles/SCOBYs have a ton of natural variation. A normal pellicle/SCOBY should look wet, tan/white/translucent, and be mostly smooth (some bumps are normal). There may also be wet brown/black yeast blobs that attach to the liquid side of the pellicle/SCOBY, get absorbed into the pellicle/SCOBY, or float around inside the liquid.
Mold
Gallery of mold: https://imgur.com/a/SzhysHi
Mold occurs when the kombucha is not acidic enough (pH < 4.6) to prevent mold organisms from growing. Other factors that make mold more likely are unsanitary conditions and cold brewing temperatures (<65F/18C).
If there is mold on your batch:
- You must throw away everything (liquid + pellicle/SCOBY) and start from scratch with fresh starter tea. By the time mold is visible on the surface of the brew, it has already contaminated the entire batch.
- Sanitize the vessel, cloth cover, and any utensils used in brewing with a homebrew sanitizing solution (StarSan, OneStep, SaniClean, potassium metabisulfite, etc) or throughly wash with soap + hot water followed by a pasteurized distilled vinegar rinse (no raw vinegar, which contains live microbe cultures).
To prevent mold, the most important thing is to use at least 2 cups of starter tea per 1 gallon of kombucha (125ml per L) to acidify the batch. Starter tea is mature kombucha: either from a previous batch (yours or a friend's), from a SCOBY hotel, or from raw/unflavored/unpasteurized commercial kombucha such as GTs or Health-Ade.
This amount of starter tea is a good rule of thumb for safe acidity: if you have a pH meter or strips, check that the starting pH is <4.6. Another important factor is maintaining clean/sanitary brewing practices: however, because kombucha is an open air ferment some mold organisms may get in even with a cloth cover, which is why acidity is also important.
Kahm Yeast
Gallery of kahm: https://imgur.com/a/XlnO7Ox
“Kahm” is a generic term for many species of usually non-harmful but also non-desirable wild yeast that can take hold in kombucha (outcompete the kombucha culture) and appear as surface growths on the the pellicle/SCOBY. Kahm often looks geometric or wrinkly vs the smooth/bumpy normal pellicle/SCOBY.
See this excellent writeup about the science of kahm yeast from u/daileta in r/fermentation: https://www.reddit.com/r/fermentation/comments/ytg2vy/kahm_down/ Their post is focused on lacto fermented vegetables (not kombucha) but is worth a read.
Kahm itself isn’t usually dangerous, but to quote our resident food microbiologist u/Albino_Echidna: “Kahm is a term used to lump a whole bunch of unwanted yeasts together, all of which are indicative of an unsafe fermentation environment. Kahm growth is indicative of a fermentation gone wrong. 'Kahm' itself isn’t harmful, but it is a warning sign that your environment wasn’t quite right and will be at higher risk of pathogenic growth as a result."
If your batch has kahm, it is up to you whether to toss + sanitize + start over with fresh starter kombucha or to try to scrape off the kahm from the surface and continue brewing. It is always safest to toss and restart - see the instructions in the Mold section.
To help prevent kahm, use at least 2 cups of starter tea per 1 gallon of kombucha (125ml per L) to strongly establish the kombucha culture and acidify the batch. Kahm may also be related to unsanitary conditions, high brewing temperature (>85F/30C), or oversteeping tea (>1hr, but may vary).
Further reading: https://www.reddit.com/r/kombucha/wiki/whats_wrong
If you still aren’t sure after comparing your batch to the pictures here, please make a post and ask!
r/Kombucha • u/AutoModerator • 1d ago
r/Kombucha Weekend Open Discussion: What Are You Drinking/Brewing? (November 21, 2026)
This is a casual space for the r/Kombucha community to hang out: feel free to post about anything related to kombucha, brewing, or life in general.
Show off your latest batch, what you have in progress, or anything that you're thinking about trying.
Questions from new brewers are especially welcome!
r/Kombucha • u/jimijam01 • 16h ago
beautiful booch Homegrown dragonfruit
Homegrown dragonfruit jun is so delicious
r/Kombucha • u/ThredFlamingo • 10h ago
question kombucha starter
I didn’t use up all of my starter kombucha for my second brew, how much tea should I brew for another batch? There’s a couple cups of liquid in my jar.
r/Kombucha • u/Deep-Cosmic-Cover • 21h ago
My most recent batch.
Apple Cider, cinnamon, clove. My next f1 will go with this recipe.
r/Kombucha • u/Tammieforlf5 • 19h ago
New to kombucha. Even after reading a bunch of stuff, still confused?
I got 2 small scobys with at least 2 cups of starter tea from one of my professors. She put it in this same jar for me but the spigot was open… I lost 1 cup of the liquid lol.
To prepare this, I put in only one cup of sweetened concentrated tea (I bought a mix of loose leaf tea from fermentaholics on amazon (fire?)), and 7 cups of filtered water.
Does it look okay? It’s been 3 days.
Also, how many days should I wait? How do I know it’s ready? She told me it would take a few weeks before I can actually start drinking from it but I didn’t really understand exactly how long it would take…
r/Kombucha • u/Novel_Land9320 • 21h ago
question Mold check
Rookie here doing his first brews. I bought a scoby of 100ml with pellicle and multipled it to 1l (added 900ml of sugary black tea as by instructions for two days over 14 days at 27C.
Then i split half and half in two jars, with a total of 2x 2.5l (again with sugary black tea) retaining the original plus new cellulose disks. This is the result after 14 days. All brews have been done at constant 27C thanks to a mat. In both big jars i added some white vinegar to make sure I d start at/under 4ph (measured with pH strips) since after mixing they appears just at 4.5 before adding vinegar.
One looks fine the other I'm not sure (there are those grey residues?)
They both smell the same, i can t describe how except there s a clear hint of vinegar.
The one with the grey residues measured now 3ph and is clearly more acid and a pity "spicy" whereas the one with more uniform disc measured perhaps 3.5ph with less acid taste and some hint of tea flavor.
Are they good?
r/Kombucha • u/zunithemime • 1d ago
2 months into my starter
Still no pellicle…
But have made good kombucha?
Good ratio of sugar:tea:water
And good acidity and then good
F2 product. Near perfect kombucha,
But still no pellicle.
I do pour on top of the old bucha
and gentle move the the F1 vessel
In circles to stir.
r/Kombucha • u/Empty_Inspector_1952 • 1d ago
flavor What is the best flavour you have ever had?
Fruit flavour, in paricular.
r/Kombucha • u/IpuUmma • 1d ago
what's wrong!? Get ready for a dumb question.
My green tea Jun (kombucha) was bottled for f2. TASTE TEST and 2 days on counter like I normally do. Then straight to the fridge for a day. I just bottled all of them up with no fruit.
It fizzed a tiny bit. THEN I opened one up around family and immediately I looked at them and said "So we just gonna blow hot ass and laugh". Til i realized it was the green tea (I bottled 3). They laughed even harder. I opened all 3 and they all smelled like sulfur. I apologized as I dumped the bottles. Never had this happen. What happened? I had to also check my other 3 kombuchas (2 black tea and 1 hibiscus). They were also plain and fine.
What happened to my Kombucha?
r/Kombucha • u/Existing_Summer_1984 • 1d ago
question First time maker, does this look normal? (13 days at 19C)
Hey everyone,
This is only my second batch of kombucha ever, so I'm still figuring things out.
My first batch was following the starter instructions I bought from amazon but the 2nd one I started this batch on November 7th. Here's what I did :
- 20g black tea
- 200g sugar
- 400ml starter from my first batch
- Added the original Scoby/pellicule
- Fermenting at 19°C, in a dark kitchen cabinet
My first batch got REALLY vinegary after just 5 days at 19c also, but this second one has been much slower. It was still pretty sweet after 9 days, and only started tasting noticeably less sweet over the last few days.
I checked the pH today with a calibrated pH meter and got around 4.0–4.1.
As for the pellicle, there's a lot of brown/beige slimy stuff forming on the surface, with quite a few yeast-looking strands and clumps. The Scoby itself also turned quite dark brown/grey when it was light beige at first, but I don't see anything obviously fuzzy or dry that looks like mold. Tasting wise it doesn't seems weird or anything but considering I once drank expired milk without realizing not sure I should trust my tasting skills.
It might be the low temp taking it slow but from the pics does this look like normal yeast/pellicle formation to you guys, or is there anything suspicious going on?
Also, is 13 days at 19C unusual, or is it just a matter of temperature ?
Would appreciate some opinions thank you.
r/Kombucha • u/RaiRai_666 • 2d ago
science I forgot about one bottle I made last week
It was on top of my fridge. This is a picture of my ceiling. Those little bits are tiny pieces of glass, too!
r/Kombucha • u/Reganishererobake • 1d ago
question Only a pellicle for fermentation?
I have a question followed by a statement!
Question: Can you use only the pellicle to make a batch of kombucha?
Statement: I am not the kombucha maker in this household; I only drink it, lol. Also the hibiscus tea pellicle in this photo grew significantly during this ferment.
Process:
All water used is RO water that has been remineralized. We don’t drink or use water from the faucet directly.
01-boiled water in the kettle
02-added boiled water to the pot
03-added sugar and stirred until dissolved
04-added tea packets
05-turned the stove on and let it boil for like 10 more minutes with tea packets still in there
06-turned off the stove. Left the tea packets in the pot for like 10 minutes. Removed them and tossed them.
07-let it cool on the counter naturally for hours.
08-put the pellicle in the jar with some cold water and vinegar and mixed it.
09-immediately added the cooled down tea.
10- PH tested
11-covered and let sit until finished.
I’ve read a few posts about kombucha and I was wanting to understand why this process has worked if it breaks so many “rules” I’ve seen?
- Don’t add vinegar to a ferment
- Don’t use only the pellicle because it’s “useless”
In our house, the F1 can take like a month to finish but it’s usually between 64-70°F in the house so this may contribute. How can it be fermented faster? :)
Any advice or knowledge is greatly appreciated! Thank you!
r/Kombucha • u/Slow_Jaguar_9688 • 2d ago
question I accidentally forgot my kambucha and it has been 3-4 weeks now does it look ok?
Please let me know if its drinkable or atleast if I can discard the batch and use the scouby for the next one
r/Kombucha • u/ButterscotchSea1798 • 1d ago
what's wrong!? Does my pellicle look okay?
I made the kombucha with only starter liquid from a former batch and no pellicle. It has been sitting for a week. It smells a lot of yeast 😬
r/Kombucha • u/dogsenigmatic • 1d ago
question Is this safe to use as starter tea?
Basically, I used an (unopened) “expired” scoby and starter tea.
I did a test brew. It looked… odd?
Left it for now about 8 weeks.
Should I dump and start fresh? Or is this likely fine starter tea.
r/Kombucha • u/West_Yoghurt5 • 1d ago
question Bitter black tea. Help.
My batch is in middle of 1F.
The tea I made is quite bitter. Any idea how I can reduce bitterness after 1F?
r/Kombucha • u/Bleach88 • 2d ago
question Grated vs sliced ginger carbonation
I noticed that during second fermentation, if I make kombucha with sliced ginger (roughly 0.5x0.5 cm slices) after approx. 2 days there is a huge amount of carbonation to the point where I have to carefully burp the bottle before opening to avoid it exploding out. Whereas, with the exact same amount of ginger, sugar and lemon juice, grated ginger produced almost no carbonation in the same amount of time.
So is grated ginger somehow killing my scoby, preventing second fermentation? Or what could be the difference between the 2? I use about 1 teaspoon of extra sugar per 500ml bottle.
r/Kombucha • u/Somniator7 • 2d ago
question New to Brewing. Trying to start without SCOBY.
This is my second attempt at this and I just wanted to get some opinions how everything looks.
Followed the starter recipe but scaled up, used synergy gingerade as starter.
Added about 50% more started than called out in the master recipe.
The first pic is about 4 days in, followed by 8 days in. Not sure if that little node is mold or not.
Thoughts?
r/Kombucha • u/Isa_Ire • 2d ago
fizz Can we take a break from showing off over-carbonated 2F?
I think we can all agree that there's a fine line between excitement for our brews and just barely avoiding exploding bottles. It’s not really something to brag about. When we celebrate these over-carbonated creations, we're not doing ourselves any favors as a community. Let’s start promoting better practices instead.
r/Kombucha • u/Outrageous_Part5032 • 2d ago
question Is it doing okay?
First week of making kombucha