r/LS1 • u/AdSignal6316 • 5h ago
Wh statesman ls1
Miss the old wh statesman ls1 definitely would own another one
r/LS1 • u/AdSignal6316 • 5h ago
Miss the old wh statesman ls1 definitely would own another one
r/LS1 • u/SavageCabbage_01 • 15h ago
I’m doing a heads/cam swap on my 2004 GTO and wondering if anyone has run a similar or more aggressive setup without piston-to-valve clearance issues.
My setup:
Bottom end: Stock LS1, factory flat-top pistons
Cam: BTR Red Hot — 221/24X, .619”/.617”, 113 LSA
Heads: GM 243, milled .012”
Valves: 2.020” intake / 1.570” exhaust
Head gaskets: Stock GM MLS
Cam timing: Dot-to-dot
Has anyone run a similar or more aggressive cam (greater duration and lift on both intake and exhaust) with stock LS1 pistons and milled 243/799 heads?
If so, did you have adequate PTV clearance without flycutting? I’d especially appreciate actual intake/exhaust clearance measurements.
I plan to check with clay, but I’m trying to get an idea of whether this combination is likely to have clearance issues.