r/LS1 • u/AdSignal6316 • 5h ago
Wh statesman ls1
Miss the old wh statesman ls1 definitely would own another one
r/LS1 • u/AdSignal6316 • 5h ago
Miss the old wh statesman ls1 definitely would own another one
r/LS1 • u/SavageCabbage_01 • 15h ago
I’m doing a heads/cam swap on my 2004 GTO and wondering if anyone has run a similar or more aggressive setup without piston-to-valve clearance issues.
My setup:
Bottom end: Stock LS1, factory flat-top pistons
Cam: BTR Red Hot — 221/24X, .619”/.617”, 113 LSA
Heads: GM 243, milled .012”
Valves: 2.020” intake / 1.570” exhaust
Head gaskets: Stock GM MLS
Cam timing: Dot-to-dot
Has anyone run a similar or more aggressive cam (greater duration and lift on both intake and exhaust) with stock LS1 pistons and milled 243/799 heads?
If so, did you have adequate PTV clearance without flycutting? I’d especially appreciate actual intake/exhaust clearance measurements.
I plan to check with clay, but I’m trying to get an idea of whether this combination is likely to have clearance issues.
r/LS1 • u/No_Bike_4169 • Oct 23 '26
Hey guys just got my first LS1 with 250,000kms rattles on start up every time even if it's warm, noise dissipates after 5mins and is almost completely gone. I'm thinking of sticking lifters any opinions before I rip into it? Thanks in advance
r/LS1 • u/Brave_Application_66 • Oct 06 '26
Started after I replaced busted my oil regulator
r/LS1 • u/Ambitious_Carry_4281 • Sep 02 '26
‘68 Mustang Coupe with and stroked 383 LS and a T-56 6 speed in the rear
r/LS1 • u/Recent-Ad-620 • Aug 25 '26
r/LS1 • u/Mountain_Walk6210 • Jul 10 '26
No Oil Pressure after Pan Leak
I had pan off to fix crack and after I got it back on I realized I had missed one. I thought that I would use shop vac to hold back the oil while epoxy hardened over the crack so I taped it to the oil fill on valve cover and let it run for half an hour. Started the engine and I now have 0 oil pressure. Pick up tube oring is good. Anyone have any suggestions?
r/LS1 • u/GasMammoth7766 • Jun 29 '26
Any help?
r/LS1 • u/ReallyDoingNothing • May 25 '26
Hey yall, i was wondering if I could ask for some help.
Im not a car mechanic by trade but am learning how to do somethings with my TransAm. I was wondering if there was a video or guide that clearly shows what I need and what to do? I just dont want to mess anything up. This is the biggest fix ive needed to do so far and the task feels daunting. I have a universal engine support bar, common tools and a few torque wrenches. I also have the new gasket, some RTV, and a new pickup line o-ring. Is there anything im missing? Thank you!
r/LS1 • u/Blaketrippin1 • Mar 30 '26
r/LS1 • u/Downtown_Resource383 • Mar 20 '26
r/LS1 • u/Worth-Employee • Mar 08 '26
Have a 2001 Camaro, need help locating a passenger side connecting rod.
r/LS1 • u/IRIE_irie_IRIE • Mar 08 '26
So I’m about at my wits end with my 02 z28 Camaro. I cannot for the life of me for the past year get the Danm secondary air injection monitor to turn on it seems no matter what I do. I bench tested the air pump. Works. I’ve gotten two new check valves tested both prior to installing both good. I waiting for a cold start and even waited untill the Iat and the ect sensors were withen 5%or deg or whatever between each other.. I’ve fine just about everything I can think of what am I missing please help I need yo get this thing yo pass smog so I can make it to work tomorrow any help is so appreciated thank you in advance
r/LS1 • u/Negative-Caramel-341 • Mar 08 '26
This was my first bolt on ls build, and everything was brand new, except for the rocker arm pedestal. Honestly, I didn’t even think about that not being brand new. I ran the car through its first heat cycle and it had good oil pressure and came up to temperature.
It then made a god-awful noise and I shut it off immediately. I let it cool down and popped the valve cover and found that the rocker arm was pressing on the side of the spring, not on the valve. The threads weren’t stripped, but the bolt was loose, and I’m thinking when the pedestal broke it let pressure off the lifter and it went off track and popped the retainer clip off of the valve spring.
Would I be OK buying a new rocker arm and push rod and new rocker arm pedestals for both sides? Or am I screwed?
r/LS1 • u/Hauntedluca • Feb 16 '26
I cant quite match these in a Spark plug Diagnosis chart ,Two plugs look carbon fouled ( cylinders 7 & 8 ) They are NGK TR6 Plugs in a Cammed LS1 with 243 heads with a 3000 stall and 3.73 diff gears
Also they have seen several liquid moly fuel cleaner and Upper Cylinder treatments which may discoloured them