r/NFA • • 2h ago

What mounting system does everyone recommend?

0 Upvotes

I have a cmmg zeroed 36 I’d like to be able to switch between my 11.5” AR and my Kuna. The suppressor is hub compatible so I’m guessing I have some options.

What does everyone recommend?


r/NFA • • 18h ago

Process Question 📝 About delisting sbrs and silencers of the nfrtr

6 Upvotes

Hello! Im looking to hear any input about deregistering sbrs and silencers from the registry.

Have you done it? What was it like? How long did it take?

Any reason not to do it?

I want to hear the good bad and ugly


r/NFA • • 9h ago

Product Question 🧰 First suppressor for 14.5" P&W AR, leaning Rhodie 6K?

Thumbnail
gallery
1 Upvotes

First time can buyer here. It will live on a 14.5" pin and weld AR in 5.56.

My priorities are low gas, sound, and durability. Budget is around $700-$900 for the can alone.

Right now I am leaning Rhodie 6K with a Comstock HPA-B and their FHL flash hider. That combo clears in the fit tool with 0.21" blast baffle clearance. Alternatively, I could go with the normal size Rhodie 6 but I am unsure if 0.80" of baffle clearance is enough.

Am I missing a better option in that price range? Is it worth adding a half inch and going for the full size Rhode? How do people like the Comstock FHL unsuppressed? I will be shooting a good amount without the can too, so I care about flash and concussion when it is off.

Thanks all


r/NFA • • 20h ago

What is the best way to take an existing ar lower and make it a sbr?

0 Upvotes

r/NFA • • 8h ago

Omega 9k trilug back in stock!!!

3 Upvotes

r/NFA • • 20h ago

Rearden DFR Experiences

1 Upvotes

Has anyone used or tried the Rearden DFR muzzle device that’s listed on their website? Currently out of stock, it looks like an interesting design and I have this weird thing where I need my mount brands to match.


r/NFA • • 22h ago

Product Question 🧰 For 18" .308 AR - DDC Enticer L or LPM Anthem S2?

2 Upvotes

The Enticer L and Anthem S2 are mostly different, but they have two things in common: they're both .30 cal, and they're both ~$550 street price (when they were last readily available). The rifle has an H3 buffer and an adjustable gas block. For reference, the first rifle suppressor I ever shot was an OCM5 on an untuned upper with a carbine buffer and spring, and the pleasantness of the silence outweighed the unpleasantness of gas hitting me in the face.

This rifle does get taken outside, but I'm not entirely convinced that 2oz and 1.5" are make-or-break.

If you had to spend $550 on a suppressor for your AR10, which would you get?


r/NFA • • 22h ago

Range ammo for shooting suppressed (9mm, 556, etc)

2 Upvotes

New suppressor owner here, wanna know if all ammo could be shoot suppressed or certain type/ finish/ plating should not be used with suppressor?


r/NFA • • 22h ago

Product Question 🧰 Approval but no email or anything

2 Upvotes

Last week I submitted 2 eform 1s for SBRs on 11/15. By 11/17 it showed finalized. I didn’t receive any emails acknowledging the submittal. I only know or maybe assuming they are approved because when I logged into eform to check my submittals they only come up when I use the drop down for form 1 and then the status drop down for approved.
Is this all we get now? I’m fine with it but I just want to make sure that’s it. I expected a submission email and the approval email with maybe a document I can save/print. Anyone else having this experience? It’s super vague. I’m in PA if that makes a difference.


r/NFA • • 1h ago

Local Move & Shoot w/ my two stamper (11.5” SBR / Laz 6)

3 Upvotes

I gotta say this setup is tuned just right for me. The Lazarus 6 paired with the Criterion Core barrel just runs, and it doesn’t seem to want to stop.

Took it indoors for some move & shoot practice, and I’m really impressed with how it manages gas, even as a lefty.

Excited to keep pushing this thing and getting more time in with it.


r/NFA • • 22h ago

A4 with a 36M. Tuning needs?

3 Upvotes

I’ve got an FN A4 build, that I want to keep visually as correct as possible, but I’m considering running an Omega 36M from time to time.

It’s a back pressure can, so I know it’s going to introduce some gas issues, but I’d like to avoid a gas block change to keep the FSP. Am I asking for trouble with that? I don’t mind some discomfort from gas to the face, but I don’t want to beat the shit out of the gun if I can avoid it. Are there internal changes I need to make?


r/NFA • • 16h ago

Silencer Suggestions - I did some homework Help Deciding on a 556 Suppressor

7 Upvotes

I have been researching for some time a suppressor to get for my 14.5 AR. I've currently got a Riflespeed gas block, H1 buffer, and a sprinco blue equivalent. I was looking for something under 12oz, with decent suppression, not Ti, lower back pressure, relatively affordable and lower back pressure, in that order. My primary considerations were a Polonium K, Rhodie 6k, and the new Polite Society 556. I have also looked at the Hexium, Carson, Ekron, A10, Sierra 5, Mod1, Blackbird and Dillon. I am getting a little overwhelmed with options and the ever expanding number of suppressor companies and suppressors out there. I was looking for some insight on these cans and others that people could recommend and their respective tradeoffs.

Thanks for any help


r/NFA • • 2h ago

Crossing state lines with NFA items (MN to ND) what to know.

10 Upvotes

ETA: Big thanks for all the help and support. My Dad is getting up there, and every time I see him may be the last, so it'd be really cool if we can get some range time in. We've never been together and it'll mean a lot to me!

Last minute I decided to visit my Dad for Thanksgiving. I was hoping to bring some guns for a range-day if time allows, but no clue what is required for crossing state lines. From Minnesota to North Dakota. Do I have time to 'notify' the NFA or whatever is required, or should I just stick to regular stuff. I never anticipated bringing anything out-of-state so I never worried about it. I would like to bring my suppressor, and possibly a registered SBR/PCC and maybe a registered SBR AR15.


r/NFA • • 4h ago

Is it a vape

Post image
206 Upvotes

Guy checking in deer this morning said you know vaping is dangerous.

My reply I would not recommend it.


r/NFA • • 1h ago

Hush Holster absolutely rips

7 Upvotes

Testing out the Hush holster with my suppressed vp9 setup. Very cool design and I’m really impressed with the quality for a 3d printed setup. Going to have to rocksett this shiv onto my barrel so it’s stop walking off, then I plan to start running it in some local matches.


r/NFA • • 2h ago

Lefty SBR

Thumbnail
gallery
13 Upvotes

Turned my 16” into a 10.3” waiting for a Rhodie 6K to take place of the Hux


r/NFA • • 23h ago

Anthem K2 is sweet

Post image
14 Upvotes

Always forget how impressive the K2 is for a budget can, picked this up one for around $450 after tax, no ragrets


r/NFA • • 16h ago

Sionics Premium 11.5

Thumbnail
gallery
23 Upvotes

r/NFA • • 6h ago

They do exist

Post image
87 Upvotes

Finally found one, that is all.


r/NFA • • 7h ago

Integrally Suppressed 338 ARC Mini Straight Pull w/ CAR-15 SD Front End

Post image
171 Upvotes

r/NFA • • 13h ago

SBR Sunday 📏 Broad River Tactical 300blk RDB CAR-15SD

Post image
106 Upvotes

r/NFA • • 33m ago

FN PS90/P90 setup with S.A.W Tisha 556/6 & Duality Arms FRT for your viewing pleasure 😎

4 Upvotes

r/NFA • • 2h ago

Any reason to go M4-2000 vs CAT ST?

Post image
15 Upvotes

I have a 10.4” 416/BRN4 upper that I’m planning on suppress. I have a $600 credit with Capitol Armory and I’m torn between the new AAC M4-2000 HUB or the CAT ST. This is not my first suppressor but it would be dedicated to this set up.

So, any reason to go M4-2000 or CAT ST? Would have a Comstock low-profile hub adapter onto a Comstock compact flash hider. Anyone have any time/use with either cans?


r/NFA • • 3h ago

Product Question 🧰 Any opinions on this mount from Kak? Or can anyone recommend another extended length mount?

Post image
10 Upvotes

My favorite barrel is slightly too short for my favorite rail so I need to extend the can a bit.


r/NFA • • 4h ago

PTR “The Jack” AOW Measurements

Post image
10 Upvotes

Does anyone actually own the PTR “The Jack” AOW and willing to provide me measurements for an AOW project.
Specifically the magazine tube length. Where they cut and welded it together.
And the barrel length.