r/NFA • u/Over-Cardiologist743 • 5h ago
Is it a vape
Guy checking in deer this morning said you know vaping is dangerous.
My reply I would not recommend it.
r/NFA • u/Over-Cardiologist743 • 5h ago
Guy checking in deer this morning said you know vaping is dangerous.
My reply I would not recommend it.
r/NFA • u/Broadrivertactical • 8h ago
r/NFA • u/Civil-Potential5305 • 3h ago
I have a 10.4” 416/BRN4 upper that I’m planning on suppress. I have a $600 credit with Capitol Armory and I’m torn between the new AAC M4-2000 HUB or the CAT ST. This is not my first suppressor but it would be dedicated to this set up.
So, any reason to go M4-2000 or CAT ST? Would have a Comstock low-profile hub adapter onto a Comstock compact flash hider. Anyone have any time/use with either cans?
r/NFA • u/Whatchero • 3h ago
Turned my 16” into a 10.3” waiting for a Rhodie 6K to take place of the Hux
r/NFA • u/PeaceKeeperCDL • 1h ago
r/NFA • u/roadrunner440x6 • 3h ago
ETA: Big thanks for all the help and support. My Dad is getting up there, and every time I see him may be the last, so it'd be really cool if we can get some range time in. We've never been together and it'll mean a lot to me!
Last minute I decided to visit my Dad for Thanksgiving. I was hoping to bring some guns for a range-day if time allows, but no clue what is required for crossing state lines. From Minnesota to North Dakota. Do I have time to 'notify' the NFA or whatever is required, or should I just stick to regular stuff. I never anticipated bringing anything out-of-state so I never worried about it. I would like to bring my suppressor, and possibly a registered SBR/PCC and maybe a registered SBR AR15.
r/NFA • u/punished_pine • 4h ago
My favorite barrel is slightly too short for my favorite rail so I need to extend the can a bit.
r/NFA • u/Matthewscout • 5h ago
Does anyone actually own the PTR “The Jack” AOW and willing to provide me measurements for an AOW project.
Specifically the magazine tube length. Where they cut and welded it together.
And the barrel length.
r/NFA • u/17th_Angel • 17h ago
I have been researching for some time a suppressor to get for my 14.5 AR. I've currently got a Riflespeed gas block, H1 buffer, and a sprinco blue equivalent. I was looking for something under 12oz, with decent suppression, not Ti, lower back pressure, relatively affordable and lower back pressure, in that order. My primary considerations were a Polonium K, Rhodie 6k, and the new Polite Society 556. I have also looked at the Hexium, Carson, Ekron, A10, Sierra 5, Mod1, Blackbird and Dillon. I am getting a little overwhelmed with options and the ever expanding number of suppressor companies and suppressors out there. I was looking for some insight on these cans and others that people could recommend and their respective tradeoffs.
Thanks for any help
r/NFA • u/parkshootsslowly • 2h ago
Testing out the Hush holster with my suppressed vp9 setup. Very cool design and I’m really impressed with the quality for a 3d printed setup. Going to have to rocksett this shiv onto my barrel so it’s stop walking off, then I plan to start running it in some local matches.
r/NFA • u/Gibbs91_30 • 19h ago
Hello! Im looking to hear any input about deregistering sbrs and silencers from the registry.
Have you done it? What was it like? How long did it take?
Any reason not to do it?
I want to hear the good bad and ugly
r/NFA • u/Accomplished-Meat525 • 49m ago
Hi All!
I've been sitting on this design idea for some time. But now, it's with much pleasure I introduce the first and only (Patent pending) Modular Reflex system for the AUG rifle.
The meat and potatoes and what it achieves;
This is a three piece Modular Reflex System (MRS) that allows you to attach any HUB capable suppressor, silencer, blast diverter or linier compensator to your host rifle without the use of a proprietary muzzle device.
The rear of the modular reflex system (MRS) uses the bayonet lug threads to attach to the rifle barrel. This seals the system and allows the internal volume of the suppressors blast chamber to be essentially doubled.
The middle section is, as the name implies modular. When removed, the attached muzzle device is allowed to telescope over the barrel, allowing the muzzle to protrude into the suppressor.
This allows for different length configurations and a choice of the rifles overall length and suppressor efficiency. Additional length middle sections (eg. 1/2") would be available for custom desired configurations. (shown in the phots is the 1" or 25.4mm middle section)
The front section of the MRS uses a ported bypass collar to hold the device in place around the barrel, while still allowing the end user to add a muzzle device like a brake. (The muzzle threads are NOT used to secure the MRS) This gives the device a second point of contact to ensure proper alignment during mounting and shooting, while also allowing gas to enter the expansion chamber. This front section also has the HUB threads that interface directly with the suppressor/muzzle device.
What all this means for the end user;
If you have a HUB mounted muzzle device/suppressor, you can now make that item a reflex design! Since the addition of extra internal volume helps a suppressor efficiency, you will now experience lower back pressure and better suppressor performance.
With this same design, you may also remove the middle section of the MRS and essentially replicate a K can, but while keeping the benefits of the added volume of a reflex design.
This system gives both the benefits of reflex suppressor and the ability to choose the overall length of your platform.
Summary;
Before this option, you had to pick either a reflex suppressor, a K can or a device such as the OCL OPS/AE/OC HUB Reflex Adapter.
However, with the OCL/B&T design you are still limited to one length and the need for a proprietary muzzle device for mounting.
This ultimately results in diminishing returns, as internal volume is now decreased using an additional threaded and collared muzzle device.
With the MRS, you achieve all the benefits, without the mentioned drawbacks.
Disclaimer;
Note, this is only a proof of concept/prototype, so final design changes are to be expected.
r/NFA • u/Proof-Rice3467 • 2h ago
I gotta say this setup is tuned just right for me. The Lazarus 6 paired with the Criterion Core barrel just runs, and it doesn’t seem to want to stop.
Took it indoors for some move & shoot practice, and I’m really impressed with how it manages gas, even as a lefty.
Excited to keep pushing this thing and getting more time in with it.
r/NFA • u/Never5ummer5280 • 9h ago
Here ya go you filthy animals!!! Scheels finally has the trilug back in stock!
r/NFA • u/SphyrnaLightmaker • 23h ago
I’ve got an FN A4 build, that I want to keep visually as correct as possible, but I’m considering running an Omega 36M from time to time.
It’s a back pressure can, so I know it’s going to introduce some gas issues, but I’d like to avoid a gas block change to keep the FSP. Am I asking for trouble with that? I don’t mind some discomfort from gas to the face, but I don’t want to beat the shit out of the gun if I can avoid it. Are there internal changes I need to make?
r/NFA • u/passing-aggressive • 23h ago
The Enticer L and Anthem S2 are mostly different, but they have two things in common: they're both .30 cal, and they're both ~$550 street price (when they were last readily available). The rifle has an H3 buffer and an adjustable gas block. For reference, the first rifle suppressor I ever shot was an OCM5 on an untuned upper with a carbine buffer and spring, and the pleasantness of the silence outweighed the unpleasantness of gas hitting me in the face.
This rifle does get taken outside, but I'm not entirely convinced that 2oz and 1.5" are make-or-break.
If you had to spend $550 on a suppressor for your AR10, which would you get?
r/NFA • u/Kalashooter888 • 23h ago
New suppressor owner here, wanna know if all ammo could be shoot suppressed or certain type/ finish/ plating should not be used with suppressor?
Last week I submitted 2 eform 1s for SBRs on 11/15. By 11/17 it showed finalized. I didn’t receive any emails acknowledging the submittal. I only know or maybe assuming they are approved because when I logged into eform to check my submittals they only come up when I use the drop down for form 1 and then the status drop down for approved.
Is this all we get now? I’m fine with it but I just want to make sure that’s it. I expected a submission email and the approval email with maybe a document I can save/print. Anyone else having this experience? It’s super vague. I’m in PA if that makes a difference.
r/NFA • u/AgePuzzleheaded6886 • 10h ago
First time can buyer here. It will live on a 14.5" pin and weld AR in 5.56.
My priorities are low gas, sound, and durability. Budget is around $700-$900 for the can alone.
Right now I am leaning Rhodie 6K with a Comstock HPA-B and their FHL flash hider. That combo clears in the fit tool with 0.21" blast baffle clearance. Alternatively, I could go with the normal size Rhodie 6 but I am unsure if 0.80" of baffle clearance is enough.
Am I missing a better option in that price range? Is it worth adding a half inch and going for the full size Rhode? How do people like the Comstock FHL unsuppressed? I will be shooting a good amount without the can too, so I care about flash and concussion when it is off.
Thanks all
r/NFA • u/steelshinessilver • 21h ago
Has anyone used or tried the Rearden DFR muzzle device that’s listed on their website? Currently out of stock, it looks like an interesting design and I have this weird thing where I need my mount brands to match.
r/NFA • u/sickmak90 • 3h ago
I have a cmmg zeroed 36 I’d like to be able to switch between my 11.5” AR and my Kuna. The suppressor is hub compatible so I’m guessing I have some options.
What does everyone recommend?
r/NFA • u/VallettaAwoo • 33m ago
So a lot of the plan b mounts sit kinda recessed and I need one that's low profile and the threads will sit out past the pic rail.
I looked through comstocks stuff but there's nothing that really works there for this setup. I know there's lots of options so I don't know if anyone has experience with other brands.