Hello,
I have been having trouble with a pc build I've been working on for someone else.
I arranged for some used hardware from an old coworker of mine, including a i5 8600k and an asus prime z370-p motherboard. When I got the hardware the mb was loose in a mb box, not in an antistatic bag or anything.
When I went to the person for who the pc will be to build it with them(mostly their son) I couldnt get it to turn on.
The MB would light up, but pushing the power button did nothing. No fans spinning, no post.
After some on site troubleshooting I took the pc home with me to try to figure out what was wrong.
Here is what I tried:
- PSU with different MB/CPU combo I have
- Also tested the RAM with the same MB/CPU combo at the same time
- Tried different RAM in the pc
- Tried to get a post with the bare minimum(CPU/Cooler/MB/PSU/RAM) outside the chassis
- Swapped the CMOS battery
- Cleared the CMOS
At that point my mind was telling me it was either the mb(most likely) or cpu(less likely).
At this point so much time had passed I was busy preparing for our baby that was on the way, and after that of course with the baby.
Last week I decided to try one last thing: reseating the CPU. Since I got the mb/cpu combo with it seated. But that also did not work.
So I started searching online, and found someone selling refurbished boards, and he had the exact same board for a decent price. He send me a picture of it booted in bios with an i7 8700k, so I bought it.
It got here yesterday, and after the kids went to sleep I started building the pc outside of the chassis. At first I was elated, since the fans on the cooler started spinning when I tested it. But I am getting no video output.
Things I tried:
- Different hdmi cable
- Plugging in a gpu and trying hdmi and dp cable on that
- reseating everything
- using only one ram stick in multiple different slotes(also trying the other one ram stick of this kit)
- clearing cmos
- waiting a few minutes after turning the pc on.
- tried the bare minimum again
- plugging in a dbug speaker I had laying around, but I get nothing from that
But whatever I try, I am getting no video
My conclusion is that the mb was indeed defective, but that on top of that the cpu as well.
There are no dbug leds on the board, so I cant use those. Is there anything I have missed? Or am I right that the cpu is probable dead as well?
Thank you for reading my wall of text, and I hope someone can help me...