r/ProjectHondas • • 11h ago

car pics My 88 Prelude in Australia

Thumbnail gallery
33 Upvotes

Wanted to share my build for those interested in learning the story behind it 🙏


r/ProjectHondas • • 10h ago

troubleshooting Strange rattling coming from k24a. Only audible on the initial press of the pedal at low rpms. Engine is WARM.

7 Upvotes

r/ProjectHondas • • 14h ago

car pics Honda Prelude

Post image
7 Upvotes

r/ProjectHondas • • 14h ago

interior Speedometer Board Understanding

Thumbnail
gallery
3 Upvotes

Good evening all! I've been on quite a journey trying to solve a particular issue that has become pretty expensive and left me completely clueless.

I have a 1999 Honda CR-V RD1. Recently I've swapped in a USDM EJ cluster, and while it works, unfortunately due to a recent move I've found that I actually need something that works in metric. The issue I'm currently having is even finding either a CDM or JDM cluster that works, so I've just decided to be a bit crazy and make my own. Something I've noticed is that the EJ/EK/RD1/DC2/DC4 clusters all use the Nippon Seiki II New Sabina boards. I've been trying to determine what the jumper pins do to configure the board, since my running theory is that all of these boards use the same IC2 chip but have different slots jumped on the JA-JF connections. I have no way to test this without ruining my known mileage. I've also ordered a CDM cluster but unfortunately, that was destroyed, and it wasn't cheap. The easiest solution I can think of is to reference either a CDM/JDM/EDM daughter board on the back of a speedometer. Fortunately it easily comes off without any permanent damage. If anyone might have an image of said board so I can compare it to mine, or even documentation on the board itself, that would be greatly appreciated, so that I may reconfigure it to move the odometer barrel at the intended rate. I've uploaded pictures I've taken of my board.


r/ProjectHondas • • 1h ago

video DIY Corner Weight Scales | Honda Civic EG

Thumbnail
youtu.be
1 Upvotes

Proper motorsport corner-weight scales are pretty expensive, so I decided to build my own for a fraction of the price!

The project is based on another guy's DIY scale design. He shared all the instructions, firmware and software for free, so huge thanks to him! You can find the link to his project in the video description.

I made a video showing the build process, the problems I ran into, and finally weighing my Civic EG.

The total cost was around €168 for all four scales!


r/ProjectHondas • • 19h ago

video Mini me is alive!!

Thumbnail
tiktok.com
1 Upvotes

Finally got her moving under power again! Couple things I gotta work out but first mini me build is alive, moving and almost shifting haha.


r/ProjectHondas • • 22h ago

parts recommendations 1997 Honda Accord Wagon (Import)

Thumbnail reddit.com
1 Upvotes