Sewing machine needles come in a variety of sizes and types and many of the problems I see online are caused by using the wrong needle type.
Generally when you buy a machine it comes with universal needles in the box. Universal is a misnomer. They are very useful on a wide variety of woven fabrics. Universal needles in a size 12 are what I use for anything that is a medium weight woven.
Jeans needles are for heavy fabrics like denim and canvas. Generally I go up to a 14 or 16 in a jeans needle.
Microtex needles are super sharp. They are excellent for woven fabrics that are delicate, snag easily, or are tightly woven. I use them on silks, satin, and cotton poplins. When all else fails on a fabric, try a microtex. Microtex come in larger sizes and can be used on heavy fabrics. Microtex needles need replaced more frequently than other needle types.
Ballpoint or Jersey needles are the same thing, usually they are labeled as ballpoint in the US and Jersey elsewhere. Ballpoint needles are appropriate for stable knit such as cotton jersey with no or minimal stretch fibers added.
Stretch needles are similar to ballpoint needles in the sense that they are for knit fabrics. Stretch needles are intended for fabrics with a higher stretch fiber percentage and in addition to that they work well on more stable knits. They are what I keep in stock for working with the widest variety of knit fabrics. I usually buy 11 or 12 in stretch needles.
Super stretch are for super stretchy problem child knits, I have not tried these as they are relatively new on the market but I will be picking up a pack before I make swimwear again.
In addition to the types above there are a great many other needles with specific uses. Within each type there is a range of sizes and the needle size should be chosen to match your fabric and thread.
Needles are consumables and will become gradually dull as you sew. The rule of thumb is that you need to replace after roughly 8 hours of run time. If you have been using a needle for a while and things start to go wrong or the machine sound changes, the first step on troubleshooting is a new needle. Old needles can damage your fabric and are more likely to break.
I also want to advise against buying off brand needles and included in that category are Singer branded needles. I personally only buy schmetz and organ brand needles and I buy exclusively off wawak.com (US and Canada only).
We've been quietly working on something we hope makes this community a lot more useful β and today we're excited to share it with you.
What's in the wiki?
We built it to answer the questions we see every week β so whether you're picking up a needle for the very first time or you've been at it a few months and hit a wall, there's something in here for you.
Here's what's covered:
π§΅ Getting started β What to make first, hand vs. machine, and the YouTube channels worth bookmarking
πͺ‘ Machine buying guide β Budget breakdowns, brand recommendations, and how to buy a great secondhand machine
βοΈ Tools & notions glossary β Every tool explained in plain English, plus what you actually need to start vs. what's nice to have later
π§ Techniques & troubleshooting β Pressing, seam finishes, backstitching, and a troubleshooting table for the most common machine gremlins
π Pattern reading & sizing β Why sewing sizes aren't clothing sizes, how to read pattern markings, and what "ease" means
π¨ Fabric guide β Wovens vs. knits, beginner-friendly fabric types, pre-washing, and where to buy
π Community resources β Our curated list of YouTube channels, blogs, and related communities
β FAQ β Detailed answers to the questions we see most often
This wiki belongs to all of us β and we need your help
A wiki is only as good as the community behind it. We're a team of moderators, not an encyclopedia, and we know there are gaps, things we got slightly wrong, and questions we haven't thought to answer yet.
That's where you come in.
We want to hear from you if:
π‘ There's a topic you wish had been covered when you were starting out
π Something in the wiki is unclear, out of date, or just wrong
π You know a great resource (video, blog, pattern, tool) that should be listed
β You've seen a question come up over and over in the sub that deserves a proper answer
βοΈ You'd like to contribute a write-up on something you know well
How to send a suggestion
Drop your suggestion right here in the comments. Tell us:
Which section it relates to (or if it should be a new section entirely)
What you'd like added, changed, or corrected
Any links or sources that would help
You can also message the mod team directly if you'd prefer, especially for corrections or anything that needs a longer explanation.
We'll review every suggestion and update the wiki regularly. If your contribution makes it in, we'll do our best to acknowledge it β this is genuinely a community project and we want it to reflect the knowledge that lives here.
A note on what makes this community special
This subreddit exists because sewing has a steep early learning curve and a long tradition of people helping each other climb it. Every question answered, every "here's what worked for me," every photo of a wonky first pillowcase posted with pride β that's what makes r/SewingForBeginners worth showing up to.
The wiki is our attempt to bottle some of that up so it doesn't get lost in the scroll. But it'll never replace the real thing, which is all of you asking and answering in the comments every day.
Thank you for being part of this. Now go make something. π§΅
My first advent calendar. I didn't find a pattern I would like, so I created my own. And the math was killing me π Where to fold, where to pin.
The biggest problem I have is cutting and measurements. Whatever I do, I can't do parallel lines when I need them. If you have any tips or favorite equipment, please, let me know!
But I have to say I'm pretty happy about how it looks. Still a lot to do better next time, but it's gonna bring a lot of happiness when full of treats π
I made a 6 panel skirt over two days from a bedsheet. Two panels had to be upside down just to be able to get all the cuts, but 4 of them the daisies are going the right way. I'm so proud of myself and can't wait to wear it! I made the pattern myself and everything! (Swipe for cat tax)
Hi everyone! My coworker recently gifted me this Kenmore machine. (385.1664180) however I am struggling to find a manual for this exact model number. I have tried some of links commented in other posts about Kenmore machines across Reddit (sears and kenmore manual searchs) with no luck.
The things I have questions about are:
- are the manuals for most 385 machines relatively the same? Do you think I would be able to get mostly the same info from any of them?
- the machine did not come with a zipper foot and Iβd like to buy one but I wasnβt sure if this would differ from the recommendations of other 385 machines.
- it also only had one bobbin, and it is metal. However when I try and search for more bobbins they are all plastic. Can you interchange them, is it possible this was not the right bobbin for the machine?
- it also needs to be cleaned and oiled so I was hoping for the manual to walk me through that, would it be safe to follow a video from a similar 385 machine?
my first sewing project made for a new addition to the family! def not perfect (didn't cut squares evenly, binding is wonky π ), but I'm proud of myself for finishing it. I learned a lot with every mistake I had to seem rip LOL
Context: I have made a bodice that has a back panel with three channels for elastic, because I don't like zippers on my clothes. I decided to use a skirt pattern that I already had from a different pattern, without realizing that it was for a dressed with a shirred back, which makes the waist way wider than I need.
Now, as I already assembled the skirt and I do not want to risk that the "regular" gathering down to my waist (aka pulling on the thread to gather the fabric) will make it difficult - if not impossible- for the skirt to get around my shoulders and my chest, can I use an elastic of the length of my waist to gather the skirt?
And if I use this method, should I put the elastic on the right or the wrong of the fabric, given that I am sewing right sides to right sides?
I'm making a zip up hoodie and using winter sweat (at least that's what it's called on German websites) and the sleeves are plush fabric that's thicker than the other one. Is there any way to make the switch between the bodice and sleeves smoother?
The plush fabric is non iron unfortunately. I was thinking I could maybe put another line of stitching along the sleeve cap but I'm not sure if it would help.
It's not a tragedy if it stays that way but a little sad. I should've probably thought about choosing fabric matching in weight to the winter sweat.
First sewing project since 2021. Easier than I thought Iβd be, it def has some sloppy bits but overall Iβm happy to have a cute banner we can reuse every year!
I'm a pretty new sewist but I'm not new to manufacturing. If you're making multiple holiday gifts especially when using the same pattern you're manufacturing,
I'm personally making 4 Santorini totes this year and today is when I'm getting things set up. I'm also changing jobs on the 30th so I need a plan in place to make sure I'm successful. Here's my plan, your plan may look different and that's ok. The key is to have a plan.
Clean your area. This morning I did a hard reset. I put away everything, even things I'll be pulling out shortly like my rulers and rotary cutter. I also wiped down my machine, checked what needles I need and made sure I have enough empty bobbins.
Print your patterns. If you're making multiple iterations of the same item print a copy of the pattern instructions for each and write the recipients name on page 1. At a bare minimum print a copy of the bill of materials and cutting guide for each version.
Check your fabric, thread, notions, interfacing etc. Do you need to order anything? Make a list of what items and which suppliers. If you're buying anything local make a separate list, make a plan to get to the local shop sooner rather than later. Have a backup plan for what to do if anything is out of stock.
Batch where you can. Cutting and interfacing are obvious places where some short term paint will lead to long term gain. Match that cut and interfaced material with your BOM's from step 2. Think about what steps (Like basting) that you can do without changing thread.
It's a marathon not a sprint. Take a little time to bask in your progress when you're done cutting, or basting. Find some background media to help you power through. Give yourself some grace when the seam ripper comes out.
I'm not an efficiency expert, I'm just a random nerd on the internet who makes stuff. The ideas above are things I should have done when I did a major batch sewing project in the spring. Many years ago when I was an EMT we would have debriefs after a major incident, drill, or just something really unusual happened. That would lead to us updating SOPs or revising training. It's something I carried into my "real job"
Even if I do everything above perfectly, something is going to go pear shaped. It's life, we roll with it and learn not to make the same mistakes the next time. It gives us the opportunity to discover a whole new series of mistakes! In all seriousness it also helps us see the problems coming, and to better deal with them next time.
Just remember if you're sewing for gifts then your goal is probably to bring someone joy through your work. Don't let the holiday stress rob the joy of making stuff from you.
Hi guys! I just got my first ever machine off of fb market place and when I tell you I have no idea what anything is yet, I have no idea lol
A piece of it fell off while I was moving it and Iβm not sure what the piece is called or where it goes, could someone point me in the right direction?
Ty!
(Also any beginner tips or videos would be appreciated!)
Hi all! I have a Brother CS5055PRW and I recently changed the needle for the first time ever! I didnβt realize you were supposed to change them fairly often. Tonight I started sewing and noticed it was making a clunking noise more than normal. Iβm sewing two pieces of quilting cotton together, so itβs not thick. I tried removing the needle and putting it back in/rethreading the machine and itβs still clunking.
hi! i took a sewing class today and it went great. i am now sewing at home but this keeps happening. iβm sewing something larger than i did in class so this didnβt happen at all during my class. how can i avoid this? thanks!
I'm relatively new to sewing, and I was recently given an overlocker (Toyota SL3340). Although I have been using it, my adjustments have been something akin to a caveman smacking a piano and somehow, inadvertently, making a pleasing tune, but without actually understanding what he did to get there.
This video, from the amazing Cornelius Quiring, is by far the clearest and most straightforward explanation I've seen of what overlockers/sergers do, how they do it, and how to control it.
The video takes away the fear and the mystery, explaining the how and why of it, along with how to identify issues and make perfect, targeted adjustments as and when they are needed.
No more suck it and see - the caveman is learning to play properly. π
Note: I'm not affiliated with CQ in any way, shape, or form, I just found this video to be excellent and empowering and thought it deserved to be shared here to help others.
Iβm ready to take the leap and buy a serger! Most important to me is that the machine isnβt shaky, replacement blades are easy to find, and that itβs easier to thread.
Iβm having such a stressful couple of weeks and I started this project last weekend, and just spent the evening finishing it and it honestly kept my mind focussed and relaxed all evening. Iβm so pleased with it and I learned so much.
I'm not exactly a beginner, but haven't been sewing in quite a long while (other than mending).
So here are my latest projects for Thanksgiving, a square and round bowl cozy. Both were fun to make. For the round one, I adjusted the darts so the cozy would fit that casserole dish better.
Edited to add: If anyone wants a tutorial for the square cozy, here's the one I used https://youtu.be/ToZjagMd9zI?is=von6NpHR9hVCV-90 She also has one for a rectangular dish. If you want one for a square or rectangular dish that doesn't have handles so you don't need those little end extensions, just search the Internet for flip basket tutorials. The flip baskets look super easy!
My first proper sewing machine. It was refurbished as well so a little cheaper. Compared to one I got from a flea market I can actually look things up! Much more beginner friendly!
TL;DR: I am hand-sewing a Hello Kitty plushie for my fp but I am heavily struggling with making clothes for her and need advice.
The whole idea is to make multiple wearable dresses for the plushie and this is the part that I am struggling the most with. I have never hand-sewn dresses before and the one that I made (slide 3) look really shabby.
Additionally, the white fabric seems to be getting dirty pretty easily, as well and unfortunately, this is the only kind of fabric that now remains with me.
If you have any experience with making plushies (or even sewing), your slightest suggestions and recommendations would mean the world to me.
Looking forward to hearing back from you!
(Sorry for making this end up sounding like a corporate mail xD !!!)