r/SewingForBeginners • • 1h ago

Help with manual for a gifted machine.

Thumbnail
gallery
3 Upvotes

Hi everyone! My coworker recently gifted me this Kenmore machine. (385.1664180) however I am struggling to find a manual for this exact model number. I have tried some of links commented in other posts about Kenmore machines across Reddit (sears and kenmore manual searchs) with no luck.

The things I have questions about are:

- are the manuals for most 385 machines relatively the same? Do you think I would be able to get mostly the same info from any of them?

- the machine did not come with a zipper foot and I’d like to buy one but I wasn’t sure if this would differ from the recommendations of other 385 machines.

- it also only had one bobbin, and it is metal. However when I try and search for more bobbins they are all plastic. Can you interchange them, is it possible this was not the right bobbin for the machine?

- it also needs to be cleaned and oiled so I was hoping for the manual to walk me through that, would it be safe to follow a video from a similar 385 machine?

Thanks for any advice in advance!


r/SewingForBeginners • • 2h ago

Using elastic to gather shirt + attaching to a bodice with an elastic panel

1 Upvotes

Hello lovelo people!

Context: I have made a bodice that has a back panel with three channels for elastic, because I don't like zippers on my clothes. I decided to use a skirt pattern that I already had from a different pattern, without realizing that it was for a dressed with a shirred back, which makes the waist way wider than I need.

Now, as I already assembled the skirt and I do not want to risk that the "regular" gathering down to my waist (aka pulling on the thread to gather the fabric) will make it difficult - if not impossible- for the skirt to get around my shoulders and my chest, can I use an elastic of the length of my waist to gather the skirt?

And if I use this method, should I put the elastic on the right or the wrong of the fabric, given that I am sewing right sides to right sides?


r/SewingForBeginners • • 2h ago

Smoothing the seams

Thumbnail
gallery
1 Upvotes

I'm making a zip up hoodie and using winter sweat (at least that's what it's called on German websites) and the sleeves are plush fabric that's thicker than the other one. Is there any way to make the switch between the bodice and sleeves smoother?

The plush fabric is non iron unfortunately. I was thinking I could maybe put another line of stitching along the sleeve cap but I'm not sure if it would help.

It's not a tragedy if it stays that way but a little sad. I should've probably thought about choosing fabric matching in weight to the winter sweat.

Thanks in advance ☀️


r/SewingForBeginners • • 4h ago

The most difficult thing when sewing? The MATH!

Post image
25 Upvotes

My first advent calendar. I didn't find a pattern I would like, so I created my own. And the math was killing me 😅 Where to fold, where to pin.

The biggest problem I have is cutting and measurements. Whatever I do, I can't do parallel lines when I need them. If you have any tips or favorite equipment, please, let me know!

But I have to say I'm pretty happy about how it looks. Still a lot to do better next time, but it's gonna bring a lot of happiness when full of treats 😁


r/SewingForBeginners • • 5h ago

best way to close this without a too-obvious seam?

Post image
2 Upvotes

I have one big tear and one which is more a scuff which probably cant be repaired?


r/SewingForBeginners • • 9h ago

How to save this

Post image
11 Upvotes

I made this e-reader sleeve but it’s so crooked looking. Is there any way I can save it / fix it without having to start all over?


r/SewingForBeginners • • 11h ago

Machine making clunking noise

2 Upvotes

Hi all! I have a Brother CS5055PRW and I recently changed the needle for the first time ever! I didn’t realize you were supposed to change them fairly often. Tonight I started sewing and noticed it was making a clunking noise more than normal. I’m sewing two pieces of quilting cotton together, so it’s not thick. I tried removing the needle and putting it back in/rethreading the machine and it’s still clunking.

any advice/troubleshooting?


r/SewingForBeginners • • 12h ago

Hello, I want to do a skirt like this (video) I was wondering if this is a semicirle skirt o what's the tipe, could Someone tell me please. 🥰🥰🥰🥰🥰🥰

6 Upvotes

r/SewingForBeginners • • 14h ago

Top thread keeps skipping? Bobbin making fabric ruffle

1 Upvotes

My top thread keeps skipping and it’s only with this one spool of thread. I’ve changed the needle over and over again and still.

Also recently my sewing has bunched up making it ruffle and idk what to do I’ve tried cleaning and removing it and putting it back etc

Help!


r/SewingForBeginners • • 14h ago

Comparing sergers

2 Upvotes

I’m ready to take the leap and buy a serger! Most important to me is that the machine isn’t shaky, replacement blades are easy to find, and that it’s easier to thread.

I’ve found these 3 for sale near me:

  1. Bernette for Bernina Funlock 006D
  2. PFAFF Hobbylock 4762
  3. New Home (I believe that’s a Janome?) 234D

Thanks!


r/SewingForBeginners • • 14h ago

What am I doing wrong?

Thumbnail
gallery
3 Upvotes

hi! i took a sewing class today and it went great. i am now sewing at home but this keeps happening. i’m sewing something larger than i did in class so this didn’t happen at all during my class. how can i avoid this?
thanks!


r/SewingForBeginners • • 14h ago

how to start

0 Upvotes

hello ive always wanted to start sewing i have like 100 sewing projects i wanna do saved in pintrest thing is im not sure how to start im sure there is some great guide but i feel overwhelmed by the amount of information out there so if anyone as been where i am please tell how to escape and how to start and ps im a student so i got limited budget or none to be honest but i really wanna do this.

thanks for reading.


r/SewingForBeginners • • 15h ago

Why is there slack with my thread?

1 Upvotes

I have read the manual made sure that every part is threaded correctly. I have cleaned the machine and put in a new needle. Brought it to get serviced and got denied due to it having plastic parts instead of metal parts.


r/SewingForBeginners • • 15h ago

Singer 4411

Post image
2 Upvotes

My first proper sewing machine. It was refurbished as well so a little cheaper. Compared to one I got from a flea market I can actually look things up! Much more beginner friendly!


r/SewingForBeginners • • 15h ago

What is this piece?

Post image
5 Upvotes

Hi guys! I just got my first ever machine off of fb market place and when I tell you I have no idea what anything is yet, I have no idea lol

A piece of it fell off while I was moving it and I’m not sure what the piece is called or where it goes, could someone point me in the right direction?

Ty!

(Also any beginner tips or videos would be appreciated!)


r/SewingForBeginners • • 16h ago

Took pants in for hemming - one pin in one pant leg?

0 Upvotes

Took some pants in for hemming, with the shoes I expect to usually wear with the pants.

The tailor sort of folded the pants up around the hem and then stuck a single pin in at the back of one pant leg at a length I said was OK. She didn't touch the other leg.

Of course I have no idea about tailoring so maybe that really is all this tailor needs to do a great job. But I wasn't confident and when I asked questions she seemed irritated. Bad vibes, so I left.

Is that how it is normally done? With pinning all around both pant legs I would have felt more sure of what I would end up with.


r/SewingForBeginners • • 16h ago

Question about making a walker caddy tote!

1 Upvotes

Hi y’all! Started sewing two months ago or so and have been chugging along at making Christmas presents. I’ve made some eyeglasses cases and bowl cozy’s for my parents but I’m hoping to make a walker caddy tote for my grandma with dementia.

I found this sewing pattern and planned to use it since there are written instructions and a video.

However I was curious if anybody else has made one before and how important it is for the outer fabric to be “durable”?

I was hoping to use some presumably cotton fabric I thrifted but am concerned it won’t be sturdy enough. Should I use some interfacing (or even batting) to give it more thickness?

Any recommendations are welcome!!


r/SewingForBeginners • • 17h ago

The holidays are upon us. A few ideas to minimize the stress and anxiety to come.

9 Upvotes

I'm a pretty new sewist but I'm not new to manufacturing. If you're making multiple holiday gifts especially when using the same pattern you're manufacturing,

I'm personally making 4 Santorini totes this year and today is when I'm getting things set up. I'm also changing jobs on the 30th so I need a plan in place to make sure I'm successful. Here's my plan, your plan may look different and that's ok. The key is to have a plan.

  1. Clean your area. This morning I did a hard reset. I put away everything, even things I'll be pulling out shortly like my rulers and rotary cutter. I also wiped down my machine, checked what needles I need and made sure I have enough empty bobbins.
  2. Print your patterns. If you're making multiple iterations of the same item print a copy of the pattern instructions for each and write the recipients name on page 1. At a bare minimum print a copy of the bill of materials and cutting guide for each version.
  3. Check your fabric, thread, notions, interfacing etc. Do you need to order anything? Make a list of what items and which suppliers. If you're buying anything local make a separate list, make a plan to get to the local shop sooner rather than later. Have a backup plan for what to do if anything is out of stock.
  4. Batch where you can. Cutting and interfacing are obvious places where some short term paint will lead to long term gain. Match that cut and interfaced material with your BOM's from step 2. Think about what steps (Like basting) that you can do without changing thread.
  5. It's a marathon not a sprint. Take a little time to bask in your progress when you're done cutting, or basting. Find some background media to help you power through. Give yourself some grace when the seam ripper comes out.

I'm not an efficiency expert, I'm just a random nerd on the internet who makes stuff. The ideas above are things I should have done when I did a major batch sewing project in the spring. Many years ago when I was an EMT we would have debriefs after a major incident, drill, or just something really unusual happened. That would lead to us updating SOPs or revising training. It's something I carried into my "real job"

Even if I do everything above perfectly, something is going to go pear shaped. It's life, we roll with it and learn not to make the same mistakes the next time. It gives us the opportunity to discover a whole new series of mistakes! In all seriousness it also helps us see the problems coming, and to better deal with them next time.

Just remember if you're sewing for gifts then your goal is probably to bring someone joy through your work. Don't let the holiday stress rob the joy of making stuff from you.

Edit for Grammar & Auto correct.


r/SewingForBeginners • • 17h ago

Where to find in depth tutorials

0 Upvotes

Does anyone have specific channel / account recommendations on YouTube or TikTok for thrift flipping/ tailoring tutorials that actually explain everything. Most of the tutorials I’ve seen don’t mention the settings they are using and just speed up the sewing process. I am completely new to sewing so I would like real time tutorials. Thank you in advance!


r/SewingForBeginners • • 18h ago

baby quilt!

Thumbnail
gallery
50 Upvotes

my first sewing project made for a new addition to the family! def not perfect (didn't cut squares evenly, binding is wonky 😅), but I'm proud of myself for finishing it. I learned a lot with every mistake I had to seem rip LOL


r/SewingForBeginners • • 20h ago

sewing machine help pleeease!

Thumbnail gallery
1 Upvotes

r/SewingForBeginners • • 20h ago

Need suggestions / resources / recommendations for this Hello Kitty plushie that I am making for my fp

Thumbnail
gallery
4 Upvotes

Hi all, first time poster here.

TL;DR: I am hand-sewing a Hello Kitty plushie for my fp but I am heavily struggling with making clothes for her and need advice.

The whole idea is to make multiple wearable dresses for the plushie and this is the part that I am struggling the most with. I have never hand-sewn dresses before and the one that I made (slide 3) look really shabby.

Additionally, the white fabric seems to be getting dirty pretty easily, as well and unfortunately, this is the only kind of fabric that now remains with me.

If you have any experience with making plushies (or even sewing), your slightest suggestions and recommendations would mean the world to me.

Looking forward to hearing back from you!

(Sorry for making this end up sounding like a corporate mail xD !!!)


r/SewingForBeginners • • 22h ago

My first wearable!

Thumbnail
gallery
307 Upvotes

I made a 6 panel skirt over two days from a bedsheet. Two panels had to be upside down just to be able to get all the cuts, but 4 of them the daisies are going the right way. I'm so proud of myself and can't wait to wear it! I made the pattern myself and everything! (Swipe for cat tax)


r/SewingForBeginners • • 23h ago

Help with taking in a skirt!

Post image
1 Upvotes

I recently bought a skirt with a shirred waist but it is too big. As it is shirred I’m not too sure how to take it in without ruing the waistline as I am scared to cut into/sew into it free style.
I tried looking online but everything is just how to make shirted fabric and not how to alter it. Could I do basic pleats or do I need to consider something else?
I have a sewing machine and am capable at hand stitching too.
Any help would be greatly appreciated!