r/SoundSystem • u/CocoDerPrimat • 1h ago
Just finished the Bass Bin which extends two speakers i have for a long time now.
Just dialed in basic cutover settings for first hearing impressions.
r/SoundSystem • u/miserlou • May 06 '20
This is a sub for the technical side of "Soundsystem Culture" - big, loud speaker boxes, often hand-built, in the dub-reggae tradition. Stuff that looks like this. Or this.
If you're looking for advice on home audio/theater systems, please try asking at /r/BudgetAudiophile, /r/Audiophile or /r/HomeTheater. Car Audio questions go to /r/CarAV.
Discussion about music should go here: https://www.reddit.com/r/SoundSystem/comments/ge9sov/official_rsoundsystem_music_thread/
Thank you!
r/SoundSystem • u/djscsi • Oct 11 '26
This sub was created on October 11, 2011 when reddit (and the internet I suppose) was a very different place. This sub seems mostly the same as it's ever been though.
Just wanted to say thanks to everyone who's contributed for all the photos and stories over the years.
cheers-
r/SoundSystem • u/CocoDerPrimat • 1h ago
Just dialed in basic cutover settings for first hearing impressions.
r/SoundSystem • u/Rude-Imagination5221 • 19h ago
The build is coming along nice. The jmods are now ready for paint. The subs ready for sanding. Lets go! Will be loaded next year with the recommended drivers.
r/SoundSystem • u/JohnFromSpace3 • 14h ago
Well the screenshot speaks for itself. With modern music like Amapiano going lower and lower, I went and changed the setup of my home soundsystem and have one skram work its full open range from 29-120hz, and the other has 3 ports closed on a 14hz Fc.
I added a 29hz low pass LR4 and an 11hz high pass bw2 on the other end but still..F3 on 8hz baby!! Is this design great or what? Admitted, just one position and not that loud either and yes, also a large part is room gain but nevertheless this SKRAM design gets you awesome single digits AND mind blowing mid bass mule kick. What other subwoofer can provide the same?
Ill post some more measurements later this week. I just want to tell the folks that are considering 'SKRAM or????"" no, SKRAM! Nothing else. Thank you.
(Well, ok, the TH18, the Keystone, the 18sound they are also great but none can go as low as this AND also tingle your better parts)
r/SoundSystem • u/LouieTushuze • 17h ago
Does anyone have any experience with this amp? I found it for a really good deal ($200 shipped) compared to all other amps with the same power or much less it just seemed significantly cheaper. Everything works just fine so I’m curious if there’s a reason for this. I’m using the amp to power two Dayton DCS385-4 15" (4 Ω, 300 W RMS each.) I know the amp is overkill but for the price why not.
Any feedback is appreciated!
r/SoundSystem • u/Gunshot990 • 21h ago
Hey everyone
I'm making this post to see if anyone can help interpret my hornresp results for the SKRAM subwoofer. I'm gonna post some graphs, it might get technical. I understand if this is not your cup of tea, no worries there.
I found a few really helpfull posts in the SKHORN DIYAudio forum for the initial input parameters; LINK
I simulated the driver B&C 21DS115-8ohm since that's the one I'll be using. The reason i wanted to check hornresp results was to first of all see how much power this cabinet will actually need (since the driver performance can change drastically once you put it in a cabinet), secondly to see at what point the driver will exceed its Xmax and thirtly to play around with filter settings and its effect.
The inital acoustic power graph looks realistic to me, I couldn't find another graph online that simulated tihis specific driver, only the 4ohm version of it. I'm by no means an expert on this stuff but hornresp makes it quite easy once you got the initial parameters right.
I numbered all the graphs, quick index:
Let's discuss these results shall we, please correct me if i'm wrong. I hope we can learn some stuff from these results together :))
It made me realise that i will probably never push this cabinet towards such levels in the coming years.
7) I apllied some filters; HPF to protect the driver from frequencies below its tuning frequency which cause it to exceed its Xmax rather fast. The SKRAM can go quite high so i also applied a LPF at 130 Hz.
HPF BW4 at 31Hz
LPF LR6 at 130Hz
Do you think these setting somewhat represent real world settings? I have knoweldge in music production so i mainly played with these setting until the graph looked somewhat reasonable.
8) The acoustical power doesn't change to much, apart from the bandpass filters' effect being visible.
9) Loudness with filters also didn't change much. we are sitting at 130+dB still with them applied. Again, very very loud.
10) Displacement with the filters changed quite a bit. The problem area is now 38Hz with 12mm of displacement. This is within the driver's Xmax of 13,5mm but i wouldn't push it much further then this.
11) This one was quite interesting to me, we can see that the driver eats quite a lot of power at 63Hz (about a B1 note); almost 1500 Watts. This frequency is somewhat in the middle of the cabinet's bandpass. I suspect the acoustical and electrical bandpass cause the impedance to drop near the cutoff frequencies, so it checks out that the middle frequencies need the most power since the bandpass isn't causing the driver to be more efficient here.
What does this information mean for the amplifier? At first i thought 1000 Watts would be the most it needed, since all these graphs are plotted with 1000W input power. But after seeing nr.11 I now know that at certain frequencies the amp need to deliver quite a bit more. Does this mean that if I were to push this cabinet to these levels, I would need to size my amp on the 1500 Watt figure? And possibly quite a bit higher to not max out the amp and come close to clipping it?
Anyways, thanks for the read if you got to here, feel free to share your thoughts and discuss.
Cheers and enjoy the weekend!!!
r/SoundSystem • u/afgelebberde • 16h ago
Hi am looking to buy of build a sound systeem on a very low budget around 200-300€ for small party’s or a little random street rave. The system is preferably battery powered or not to high voltage for an power station. I hope it’s possible to get a system for this budget.
r/SoundSystem • u/Calm_aLlama_down • 1d ago
Consisting of 12 x EM Quakes supplied by a friend soundsystem we linked up with
10 x EM15 Custom Megatons
2 x Void Air Vantage
8 x Void Arcline 8
Had some hiccups with the powersoft x4 and armonia at the start but managed to get it all up and running. Was a lot of fun!
r/SoundSystem • u/bingbangboom73 • 2d ago
Looking for suggestions for an amp for our 2 x 100W tweeters if anyone can help at all. Currently running an ancient Numark thing that’s 20 years old. Only finished the build last week right enough.
r/SoundSystem • u/the_flixer • 2d ago
Will be used in my basement, outdoor and for parties. Do I want overkill? Yes.
Right now I have a partybox ultimate and a jbl Eon 718s, but I want to build something my own because I like to build things.
I’m thinking about building two tops and one subwoofer because ply is crazy expensive right now. Preferably a subwoofer with great kick but still goes pretty low. I have looked at jmod tops but they might end up on the more expensive side for my first build. For subs I have looked at paraflex and skram mostly.
I have access to a cnc machine and most tools.
I just want to get some recommendations.
What was your first build?
r/SoundSystem • u/Due_Communication629 • 2d ago
Just finished my SAWMODs, awesome project. Now onto the subs, building 4x Paraflex Type O CRAM 2x12 (35Hz V2).
Two quick questions.
Driver:
going with 2x B&C 12NBX100 per cab. I wanted something efficient since my amp isn't huge. It's on the HOQS recommended list, but B&C sells it more as a woofer than a sub and that nags at me a bit. Anyone run these for sub duty? Good call, or should I be looking at something else?
Spacing:
the plan says to mount the drivers as high in the chamber as possible and as close together as possible. But in most build photos I come across there's a clear gap between the two. Why is that? Clearance issue, or does it just not matter much?
r/SoundSystem • u/Recent-Driver-1092 • 3d ago
The homies came through and painted up the second one 🤘🏻🫠
r/SoundSystem • u/joe_the_psychonaut • 2d ago
As the title suggests, I am trying to discern whether there is any difference between the C2D and the C2D Pro... Primarily I am wondering which one has a greater output volume if both are loaded with the same driver? Lets assume they are crossed over at 90Hz and 250Hz
Sorry if this is a bit of novice question!
https://planssystemes.notion.site/Paraflex-C-2D-Pro-1x15-78e20668380d48f08800cfcffa961635
https://planssystemes.notion.site/Paraflex-C-2D-1x15-0c6ddb63892a46bd8a24ad53014e8ca3
r/SoundSystem • u/avsalom • 2d ago
I was planning to see Channel One in Cambridge on the 28th and I waited too long to get tickets (like a moron).
My wife is super bummed.
Does anyone know any other similar concerts around Cambridge and/or London area on the 28th?
r/SoundSystem • u/Icy-Acanthaceae9720 • 3d ago
4x C2E Silver Formula (Ex Sinai) loaded with B&C 18DS115 using 18” adapters.
4x Trapezoid C2D loaded with 15” volts
2x Martin Audio W8C
Powered by MC2!
r/SoundSystem • u/calamungo • 3d ago
Howdy sound friends. Soon I'm going to be receiving an additional amplifier to my setup which means I'll have enough channels and power to bi-amp my two Peavey SP3 BX speakers. I wanna use my 750Wx2 Yamaha XP7000 to power to top section which will be the compression driver and mid woofer which is then internally crossed-over, then I'll use my incoming Sinbosen SR4 to power the woofer. Since I have the channels I will be running these in stereo too.
The thing is I'm getting the non-dsp version, I'm worried about how I actually correctly set the power to be even between these two sections to get a balanced sound from the cabinet? Should I be looking at getting a dsp processor? And how will I recall this "setting" in the future, when the SR4 just has small unstepped gain knobs?
Knowledge and wisdom and berations are much appreciated!
Cal
r/SoundSystem • u/Dangerous-Web9910 • 3d ago
Hi everyone! I'm looking for some advice on a subwoofer project. I'd really appreciate input from people with experience in loudspeaker design, enclosure modelling and professional PA systems.
I recently bought two Behringer Eurolive B1800X PRO subwoofer cabinets from an audio rental company that was selling off some of its equipment.
Both cabinets had already been modified by the company before I bought them: the original Behringer woofers had been replaced with RCF LF18X401 18-inch, 8-ohm drivers.
As far as I know, the original Behringer passive crossover boards are still installed inside both cabinets. I haven't yet established whether they are still connected to the signal path or have been bypassed.
My current setup
2 × Behringer Eurolive B1800X PRO cabinets
2 × RCF LF18X401 18-inch, 8-ohm drivers
2 × Behringer Europower EP4000 amplifiers
2 × Turbosound TPX153 passive tops
1 × Behringer Super-X Pro CX2310 active crossover
Each subwoofer is powered independently by one channel of an EP4000. Both receive the mono subwoofer signal from the CX2310. The system is currently working properly.
Existing cabinet information
External dimensions: approximately 547 × 700 × 553 mm (W × H × D)
Two bass-reflex ports per cabinet
Port diameter and length: not yet measured
Net internal volume: unknown
Original tuning frequency: unknown
I haven't been able to find reliable technical documentation specifying the original enclosure volume or reflex tuning.
What I'm trying to achieve
My main goal is to understand whether the original B1800X PRO enclosures are actually a good match for the RCF LF18X401 drivers, or whether a properly designed enclosure could offer significantly better performance.
I'm aiming for a full, deep and powerful bass response, with good punch and definition, mainly for techno, dubstep and drum & bass.
Before spending money or starting any modifications, I'd like to understand what the best possible solution would be.
Questions
How well do you think the original B1800X PRO enclosure works with the RCF LF18X401?
Would a newly designed enclosure offer a significant improvement in low-frequency extension, output, efficiency or overall sound quality?
If the existing cabinets are worth keeping, could modifying the bass-reflex ports (diameter, length or configuration) significantly improve their performance?
What net internal volume and tuning frequency would you recommend for the LF18X401?
Should I keep, remove or bypass the original Behringer passive crossover boards?
Would you recommend a conventional bass-reflex design or another enclosure type?
I'm quite confident with woodworking and cabinet construction, so building or modifying enclosures isn't a problem for me. My weakness is the acoustic engineering side: I don't have much experience with enclosure design, Thiele-Small parameters or simulation software.
I'm happy to open the cabinets, take measurements and provide detailed pictures if necessary.
I'd really appreciate any advice, simulations or design suggestions. I'm not necessarily trying to preserve the original cabinets: I simply want to find out what would genuinely be the best solution for these drivers before investing time and money.
Thanks in advance!
r/SoundSystem • u/ooMrQueenoo • 4d ago
Have you guys filmed or know of someone who documented the entiere process of sound system comming to life and put it up somewhere on the internet for others to watch/read?
Thanks a lot for all inputs:)
r/SoundSystem • u/Any-Selection-6773 • 3d ago
Hello! Does anyone have information about these boxes?
r/SoundSystem • u/Diligent-Tea8613 • 3d ago
Hello all! I’m looking at getting into sound systems as a complete newbie. I know nothing. I currently have a budget of around £2000 but will look to expand the system in the future. It will be used to host small parties with friends and friends of friends of up to about 30 people.
The main genre I play is Bassline and hardbounce so will ideally need to be fairly punchy as opposed to a more deep sounding bass.
Got any tips or resources that I can use? Would it be best to DIY it or not. With my budget I’ll have to purchase used parts.
r/SoundSystem • u/mariekondo13 • 4d ago
Hi, I have a small soundsystem composed of:
-EV sh1502er
-15" scoop
-t-amp E800
-t-tracks dsp 206
The current setup is both the volume knobs of the t-amp are all the way up and the dsp has a limiter on the mid top channel (since the EV handles 250w RMS)
The issue is that even if I turn the signal source full volume (from the console and the mixer) and the mixer LED shows peaks of +1Db, the LEDs on the dsp only light up on peaks and only at -30Db.
Also the T-amp's LEDs only light rarely on peaks.
My guess was that I had some sort of limiter or gain reduction on the dsp, but I checked and it doesn't seem so.
Has anyone else had this problem?
Is this something to do with the mixer?